Kalganova, T. and Zaitseva, E. (1996) 'The Laboratory Work: Multiple-Valued PLA Synthesis. (in Russian)'. Minsk, Republic of Belarus. Proc of the 2-nd International Conference on New Information Technologies in Education. pp. 245 - 254.

Huang, Y. (1996) 'In-situ measurement of grain boundary mobility during recrystallization in an Al-0.05Si single-phase alloy by EBSD'.RMS EBSD Workshop 1996. Manchester, UK. 24 - 24 April. [unpublished]

Kalganova, T., Zaitseva, E., Kochergov, E. and Malecki, K. (1996) 'Segmentation and Recognition of Touching Characters in Automatic Document Reading System.'. Zakopane, Poland. Proc. of the International Workshop on Design Methodologies for Signal Processing. pp. 180 - 187.

Kaplunov, YD. and Nol'de, EV. (1996) 'On the effect of transverse compression in the shell dynamics'. Prikladnaya Matematika I Mekhanika, 60 (4). pp. 644 - 650. ISSN: 0032-8235

Huang, Y. (1996) 'A novel surface treatment method for diffusion bonding of aluminium alloys'.IOM Workshop for Superplastic Forming and Diffusion Bonding. Leedsd, UK. 26 - 26 March. [unpublished]

Fang, CM., De Groot, RA., Wiegers, GA. and Haas, C. (1996) 'Electronic structure of the misfit layer compound (SnS)1.20TiS2: Band structure calculations and photoelectron spectra'. Journal of Physics Condensed Matter, 8 (11). pp. 1663 - 1676. ISSN: 0953-8984

Li, Z., Ji, S., Yang, G. and Wei, H. (1996) 'Application and Research of Die Casting Die CAD/CAM Technology (in Chinese)'. Special Casting and Nonferrous Alloys, 1996 (1). pp. 23 - 26. ISSN: 1001-2249

Bonser, RHC. and Rayner, JMV. (1996) 'Measuring leg thrust forces in the common starling'. Journal of Experimental Biology, 199 (2). pp. 435 - 439. ISSN: 0022-0949

Ghobadian, A. and Gallear, DN. (1996) 'Total quality management in SMEs'. Omega - International Journal of Management Science, 24 (1). pp. 83 - 106. ISSN: 0305-0483

Wang, B. and Lu, G. (1996) 'On the optimisation of two-component plates against ballistic impact'. Journal of Materials Processing Technology, 57 (1-2). pp. 141 - 145. ISSN: 0924-0136

Alfano, G., Marotti de Sciarra, F. and Rosati, L. (1996) 'Automatic analysis of multicell thin-walled sections'. Computers and Structures, 59 (4). pp. 641 - 655. ISSN: 0045-7949

Shaw, S., Warby, MK. and Whiteman, JR. (1996) 'Discrete schemes for treating hereditary problems of viscoelasticity and applications'. Journal of Computational and Applied Mathematics, 74 (1-2). pp. 313 - 329. ISSN: 0377-0427

Lawrie, JB. and Abrahams, ID. (1996) 'Travelling waves on a membrane: reflection and transmission at a corner of arbitrary angle. II'. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 452 (1950). pp. 1649 - 1677. ISSN: 1364-5021

Apel, T., Sändig, A-M. and Whiteman, JR. (1996) 'Graded mesh refinement and error estimates for finite element solutions of elliptic boundary value problems in non-smooth domains'. Mathematical Methods in the Applied Sciences, 19 (1). pp. 63 - 85. ISSN: 0170-4214

Rees, DWA. (1996) 'Sheet orientation and forming limits under diffuse necking'. Applied Mathematical Modelling, 20 (8). pp. 624 - 635. ISSN: 0307-904X

Holm, H., Maischak, M. and Stephan, EP. (1996) 'The hp-version of the boundary element method for Helmholtz screen problems'. Computing, 57 (2). pp. 105 - 134. ISSN: 0010-485X

Rees, DWA. and Liddiard, M. (1996) 'Elasticity and flow behaviour of a metal matrix composite'. Key Engineering Materials: Frontiers for Engineering Materials, 118-119 (118-119). pp. 179 - 185. ISSN: 1662-9795

Shaw, S. and Whiteman, JR. (1996) 'Towards adaptive finite element schemes for partial differential Volterra equation solvers'. Advances in Computational Mathematics, 6 (1). pp. 309 - 323. ISSN: 1019-7168

Alfano, G. and Marotti de Sciarra, F. (1996) 'Mixed finite element formulations and related limitation principles: a general treatment'. Computer Methods in Applied Mechanics and Engineering, 138 (1-4). pp. 105 - 130. ISSN: 0045-7825

Bahai, H., Glinka, G. and Esat, II. (1996) 'Numerical and experimental evaluation of SIF for threaded connectors'. Engineering Fracture Mechanics, 54 (6). pp. 835 - 845. ISSN: 0013-7944

Macredie, R., Taylor, SJE., Yu, XN. and Keeble, R. (1996) 'Virtual reality and simulation: an overview'.1996 Winter Simulation Conference (WSC 96). CORONADO, CA. I E E E. pp. 669 - 674. ISSN: 0275-0708

Atherton, MA. and Austin, P. (1996) 'Experiences of ISO 9000 with small firms in building services'. Facilities, 14 (11/11). pp. 25 - 27. ISSN: 0263-2772

Yang, Q. and Butler, C. (1996) 'A 3-D noncontact trigger probe for coordinate measuring machines'. Measurement Journal of the International Measurement Confederation, 17 (1). pp. 39 - 44. ISSN: 0263-2241

Shaw, S. and Whiteman, JR. (1996) 'Discontinuous Galerkin method with a posteriori L_p(0,t(i)) error estimate for second-kind Volterra problems'. Numerische Mathematik, 74 (3). pp. 361 - 383. ISSN: 0029-599X

Yang, Q., Butler, C. and Baird, P. (1996) 'Error compensation of touch trigger probes'. Measurement Journal of the International Measurement Confederation, 18 (1). pp. 47 - 57. ISSN: 0263-2241

Kuljis, J. and Macredie, R. (1996) 'Supporting model development through simulation systems'. Journal of Intelligent Systems, 6 (1). pp. 25 - 43. ISSN: 0334-1860

Huang, Y. and Young, RJ. (1996) 'Interfacial micromechanics in thermoplastic and thermosetting matrix carbon fibre composites'. Composites Part A Applied Science and Manufacturing, 27 (10). pp. 973 - 980. ISSN: 1359-835X

Kaplunov, YD. and Nolde, EV. (1996) 'On the role of thickness compression in shell dynamics'. Journal of Applied Methematics and Mechanics, 60 (4). pp. 639 - 645. ISSN: 0021-8928

Chang, ITH., Niu, F., Slimovici, D., Wildig, C., Leigh, PA., Dobson, PJ. and Cantor, B. et al. (1996) 'Manufacture and characterization of nanocomposite thin films of Si-SiO2 and Ag-Si'. Materials Science Forum, 225-227 (PART 1). pp. 175 - 178. ISSN: 0255-5476

Campbell, J. and Vignjevic, R. (1996) 'Lagrangian Hydrocode Modelling of Hypervelocity Impact on Spacecraft'.The Third International Conference on Computational Structures Technology. Civil-Comp Press. pp. 95 - 101. ISSN: 1759-3433

Fan, Z. and Miodownik, AP. (1996) 'Microstructural evolution in rapidly solidified Ti-7.5 Mn-0.5 B alloy'. Acta Materialia, 44 (1). pp. 93 - 110. ISSN: 1359-6454

Fan, Z. and Boccaccini, AR. (1996) 'A new approach to the effective viscosity of suspensions'. Journal of Materials Science, 31 (10). pp. 2515 - 2521. ISSN: 0022-2461

Fan, Z. (1996) 'A microstnietural approach to the effective transport properties of multiphase composites'. Philosophical Magazine A Physics of Condensed Matter Structure Defects and Mechanical Properties, 73 (6). pp. 1663 - 1684. ISSN: 0141-8610

Macredie, RD., Paul, RJ. and Mitra, G. (1996) 'Modelling for Applications System Design'. Journal of Intelligent Systems, 6 (1). pp. 1 - 4. ISSN: 0334-1860

Kalganova, T. and Shmerko, VP. (1996) 'Design the methods and algorithms of MVL function processing (in Russian)'. Place of publication: Belarusian State University of Informatic and Radioelectronic.

Kalganova, T. and Morozevich, AN. (1996) 'Design the automatic psychological testing system due to handwriting'. Place of publication: Belarusian State Economic University.

Vignjevic, R. and Cavalcanti, MJ. (1996) 'Numerical simulation of the lynx helicopter main lift-frame component collapse'. International Journal of Crashworthiness, 2 (1). pp. 25 - 38. ISSN: 1358-8265

Campbell, J. and Vignjevic, R. (1996) 'Modelling hypervelocity impact in DYNA3D'.3rd International Conference on Dynamics and Control of Structures in Space (SPACE 96). LONDON, ENGLAND. 1 - 31 May. COMPUTATIONAL MECHANICS PUBLICATIONS LTD. pp. 441 - 453.

Kalganova, T. (1996) 'Functional decomposition methods for multiple-valued logic functions and its system'.Proc. of the 3rd International conference on Applications of Computer Systems, ACS'96.. Szczecin, Poland. Proc. of the Third International Conference on Application of Computer Systems. pp. 75 - 82.

Ghobadian, A. and Gallear, D. (1996) 'TQM and the Small to Medium Sized Manufacturing Sector', in Hillery, M T. (ed.) Re-engineering for World Class Manufacturing. Department of Manufacturing and Operations Engineering (University of Limerick), ISBN 1-874653-38-0. pp. 877 - 882.

Ghobadian, A. and Gallear, D. (1996) 'Total Quality Management for the SME', in Bramley, A M., Mileham, A, R. and Owen, G W. (eds.) Advances in Manufacturing Technology X. Bath University ISBN 1-85790-031-6. pp. 531 - 535.

Eskin, DG. (1996) 'Effect of melt overheating on primary solidification in aluminium alloys'. Zeitschrift fuer Metallkunde, 87 (4). pp. 295 - 299. ISSN: 0044-3093

Gardner, LA. and Macredie, RD. (1996) 'Hypermedia support for information systems development: A cognitive modelling perspective'. Journal of Intelligent Systems, 6 (1). pp. 95 - 113. ISSN: 0334-1860

Bonser, RHC. (1996) 'Comparative mechanics of bill, claw and feather keratin in the Common Starling Sturnus vulgaris'. Journal of Avian Biology, 27 (2). pp. 175 - 177. ISSN: 0908-8857

Bonser, RHC. (1996) 'The mechanical properties of feather keratin'. Journal of Zoology, 239 (3). pp. 477 - 484. ISSN: 0952-8369

Winter, M. (1996) 'Lavrentiev phenomenon in microstructure theory'. Electronic Journal of Differential Equations, 6. pp. 1 - 12. ISSN: 1072-6691 Open Access Link

Chang, ITH., Svec, P., Gogebakan, M. and Cantor, B. (1996) 'Rapidly solidified Al85Ni15-xYx(x=5,8,10) alloys'. Materials Science Forum, 225-227 (PART 1). pp. 335 - 340. ISSN: 0255-5476

Thomas, PJ., Meech, JF. and Macredie, RD. (1995) 'Personal information appliances'.6th International Conference on Human-Computer Interaction (HCI International 95). TOKYO, JAPAN. 1 - 14 July. Elsevier. pp. 945 - 950. ISSN: 0921-2647

Chang, ITH., Balcers, O. and Cantor, B. (1995) 'Effect of added Mo on the crystallization behaviour of rapidly solidified Fe70Cr20B10 alloys'. International Journal of Rapid Solidification, 9 (1). pp. 63 - 73. ISSN: 0265-0916

Earnshaw, R., Macredie, R. and Vince, J. (1995) 'Editorial'. Virtual Reality, 1 (2). pp. I - I. ISSN: 1359-4338

Mares, C. and Surace, C. (1995) 'Finite Element Updating Using a Genetic Algorithm'.2nd International Conference on Structural Dynamics Modelling, Test, Analysis and Correlation, NAFEMS/DTA. Cumbria, UK.