Jing, X., Ireland, T., Gibbons, C., Barber, DJ., Silver, J., Vecht, A., Fern, G., Trowga, P. and Morton, DC. et al. (1999) 'Control of Y2O3: Eu spherical particle phosphor size, assembly properties, and performance for FED and HDTV'. Journal of The Electrochemical Society, 146 (12). pp. 4654 - 4658. ISSN: 0013-4651

Ji, S., Vuorinen, JJ. and Fan, Z. (1999) 'A casting classification and coding system suitable for a CIMS in casting production'. International Journal of Cast Metals Research, 12 (3). pp. 161 - 165. ISSN: 1364-0461 Open Access Link

Mottershead, JE., Friswell, MI. and Mares, C. (1999) 'A method for determining model-structure errors and for locating damage in vibrating systems'. Meccanica, 34 (3). pp. 155 - 168. ISSN: 0025-6455

Kalganova, T. and Miller, JF. (1999) 'Circuit layout evolution: An evolvable hardware approach'. IEE Colloquium (Digest). ISSN: 0963-3308

Vignjevic, R. and Campbell, J. (1999) 'A penalty approach for contact in smoothed particle hydrodynamics'. International Journal of Impact Engineering, 23 (1). pp. 945 - 956. ISSN: 0734-743X

Ji, S., Vuorinen, J. and Fan, Z. (1999) 'A comprehensive classification and coding system suitable for a computer integrated system in casting production'. International Journal of Casting Metals Research, 12 (1999). pp. 161 - 165.Open Access Link

Kang, H., Butler, C. and Yang, Q. (1999) 'Evaluation of metal texture effect on paint appearance'.Photonics East '99. BOSTON, MA. 1 - 20 September. SPIE. pp. 202 - 209. ISSN: 0277-786X

Evans, PSA., Harrey, PM., Ramsey, BJ. and Harrison, DJ. (1999) 'Component attachment in lithographic film circuits'. Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium. pp. 282 - 286. ISSN: 1089-8190

Lochun, D., Kilitziraki, M., Jarrett, E., Green, S., Ramsey, B., Samuel, I. and Harrison, D. et al. (1999) 'Post-processing of conductive lithographic films for multilayer device fabrication'. Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium. pp. 287 - 293. ISSN: 1089-8190

Bonser, RHC. and Dawson, C. (1999) 'Structural mechanical properties of down feathers and biomimicking natural insulation materials'. Journal of Materials Science Letters, 18 (21). pp. 1769 - 1770. ISSN: 0261-8028

Ding, W., Ji, S. and Zhang, J. (1999) 'Application of CAD of Hot Box Die of Cylinder Head (in Chinese)'. China Foundry Machinery & Technology, 1999 (05). pp. 21 - 25.

Wan, L., Ji, S., Zhang, J., Wang, A., Ding, W. and Zhang, S. (1999) 'Application of CAD technology in developing hot box tools of cylinder head (in Chinese)'. China Foundry Machinery and Technology, 1999 (05). pp. 32 - 36. ISSN: 1672-6421

Huang, Y. and Humphreys, FJ. (1999) 'The effect of annealing temperature on the orientation dependence of boundary mobility in aluminium'.4th Inter Conf on Recrystallization and Related Phenomena. Tokyo, Japan. 21 - 24 September.

Silver, J., Fern, GR., Miller, JR., McCammon, CA., Evans, DJ. and Leigh, GJ. (1999) 'Effects of temperature and pressure on the Mossbauer spectra of models for the [4Fe-4S](2+) clusters of iron-sulfur proteins and the structure of [PPh4](2)[Fe4S4(SCH2 CO2C2H5)(4)]'. Inorganic Chemistry, 38 (19). pp. 4256 - 4261. ISSN: 0020-1669 Open Access Link

Ghobadian, A., Li, R., Gallear, D. and Merricks, P. (1999) 'Measuring supply chain performance - literature review and implications for further study'. Manchester, UK. 1 - 3 September. Proceedings of British Academy of Management Annual Conference.

Ghobadian, A., Gallear, D. and Liu, J. (1999) 'An examination of TQM implementation processes of benchmark organisations'. Manchester, UK. 1 - 3 September. Proceedings of British Academy of Management Annual Conference.

Withnall, R., Silver, J., Fern, G. and Smalley, JW. (1999) 'Raman spectroscopy of the black pigmenting anaerobic bacterium porphyromonas gingivalis', in Greve, J. and Puppels, GJ. (eds.) Spectroscopy of biological molecules: New directions. Springer. pp. 573 - 574. ISBN 10: 0792358473. ISBN 13: 978-0792358473.

Xie, T., Yang, Q., Au, YHJ. and Jones, BE. (1999) 'Modelling of a cone-jet sensor using finite element method'. Sensors and Actuators, A: Physical, 76 (1-3). pp. 78 - 82. ISSN: 0924-4247

Golightly, D., Hone, KS. and Ritter, FE. (1999) 'Speech interaction can support problem solving'.International Conference on Human-Computer Interaction (INTERACT 99). EDINBURGH, SCOTLAND. 30 - 3 September. I O S PRESS. pp. 149 - 155.

Titler, PJ., Fern, G., Silver, J., Evans, DJ. and McCammon, CA. (1999) 'High pressure Mossbauer studies of [NEt4]2[Fe2S2Cl4], [NEt4]3[Fe2S2Cl4], [NEt4]3[Fe6S6Cl6]'.International Conference on the Applications of the Mossbauer Effect. Garmisch-Partenkirchen, Germany. 29 - 3 September. [unpublished]

Chiodo, JD., Billett, EH., Perkins, M., Harrison, DJ. and Anson, AW. (1999) 'Shape memory alloy actuators for ADSM of consumer electronic products'.International Symposium on Shape Memory Alloys: Fundamentals, Modeling and Industrial Applications held at the 38th Annual Conference of Metallurgists of CIM. Quebec City, Canada. 22 - 26 August. CANADIAN INST MINING, METALLURGY AND PETROLEUM. pp. 425 - 439.

Fang, CM., De Groot, RA., Bischoff, MMJ. and Van Kempen, H. (1999) 'Influence of a spin-polarized tip on the Fe(001) surface'. Surface Science, 436 (1). pp. L648 - L652. ISSN: 0039-6028

Rees, DWA. and Clayton, A. (1999) 'Creep and recovery in bi-polymer composites'.5th International Conference on Flow Processes in Composite Materials. Plymouth, UK. 12 - 14 July. ADVANCED COMPOSITES MANUFACTURING CENTRE. pp. 171 - 178.

Paul, RJ. and Macredie, RD. (1999) 'Guest Editorial: Managing Dynamic Requirements'. Requirements Engineering, 4 (2). pp. 63 - 64. ISSN: 0947-3602

Grant, S. (1999) '‘‘Case Study Methodology Used on the UK Lean Aerospace Initiative’’'.Fourth International Symposium on Logistics. Florence, Italy - July 1999. [unpublished]

Huang, Y., Ridley, N., Humphreys, FJ. and Cui, JZ. (1999) 'Diffusion bonding of superplastic 7075 aluminium alloy'. Materials Science and Engineering: A, 266 (1-2). pp. 295 - 302. ISSN: 0921-5093

Fang, CM., De Groot, RA., Bruls, RJ., Hintzen, HT. and De With, G. (1999) 'Ab initio band structure calculations of Mg3N2 and MgSiN2'. Journal of Physics Condensed Matter, 11 (25). pp. 4833 - 4842. ISSN: 0953-8984

Atherton, MA., Bleakley, GJ., Doorly, DJ. and Colins, MW. (1999) 'Stents and their fluid dynamics: A comprehensive study involving design procedures and experimental work'.17th National Conference on Heat Transfer. Ferrara, Italy. 16 - 18 June. [unpublished]

Gilbert, JM., Elliner, GR., Key, PH., Snelling, HV., Harrison, D. and Harrey, P. (1999) 'Via and embedded resistor production in low cost lithographically printed substrates'.49th IEEE Electronic components and technology conference (ECTC). San Diego, CA, USA. 1 - 4 June. IEEE. pp. 160 - 166. ISSN: 0569-5503 Open Access Link

Bonser, RHC. (1999) 'Branching out in locomotion: The mechanics of perch use in birds and primates'. Journal of Experimental Biology, 202 (11). pp. 1459 - 1463. ISSN: 0022-0949

Kalganova, T. (1999) 'A New Evolutionary Hardware Approach for Logic Design.'.Genetic and Evolutionary Computation Conference, GECCO'99. Orlando, Florida, USA. Proc. of the GECCO'99 Student Workshop.. pp. 360 - 361.Open Access Link

Huang, Y. and Humphreys, FJ. (1999) 'Measurements of grain boundary mobility during recrystallization of a single-phase aluminium alloy'. Acta Materialia, 47 (7). pp. 2259 - 2268. ISSN: 1359-6454

Benati, F., Butler, C., Gatti, S., Sacerdotti, F. and Yang, Q. (1999) 'A robot-based burr measurement system for the automotive industry'.16th IEEE Instrumentation and Measurement Technology Conference (IMTC/99). Venice, Italy. 24 - 26 May. IEEE. pp. 1740 - 1744. ISSN: 1091-5281 Open Access Link

Xie, T., Yang, QP., Jones, BE., Kang, H. and Butler, C. (1999) 'Effects of the size of the measured surface on the performance of an air cone-jet sensor for in-process inspection'.IEEE Instrumentation and Measurement Technology Conference. Venice, Italy. 24 - 26 May. IEEE. pp. 1358 - 1361. ISSN: 1091-5281 Open Access Link

Rees, DWA. and Au, YHJ. (1999) 'Deformation and fracture of a particulate MMC under nonradial combined loadings'.Symposium on Multiaxial Fatigue and Deformation: Testing and Prediction. Seattle, Washington. 19 - 20 May. ASTM International100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. pp. 54 - 81. ISSN: 0066-0558

Kong, LX., Hodgson, PD. and Wang, B. (1999) 'Development of constitutive models for metal forming with cyclic strain softening'. Journal of Materials Processing Technology, 89-90. pp. 44 - 50. ISSN: 0924-0136

Mikhailov, SE. (1999) 'A functional approach to durability description: Basic functionals'.8th International Conference on the Mechanical Behaviour of Materials (ICM8). VICTORIA CONF CTR, VICTORIA, CANADA. 16 - 21 May. UNIV VICTORIA, DEPT MECH ENGN. pp. 1210 - 1215.

Zhang, J., Fan, Z., Wang, Y. and Zhou, B. (1999) 'Microstructural refinement in Al-Mg2Si in situ composites'. Journal of Materials Science Letters, 18 (10). pp. 783 - 784. ISSN: 0261-8028

Chiodo, JD., Billett, EH. and Harrison, DJ. (1999) 'Active disassembly using shape memory polymers for the mobile phone industry'.7th IEEE International Symposium on Electronics and the Environment (ISEE 1999). Danvers, MA. 11 - 13 May. IEEE. pp. 151 - 156. ISSN: 1095-2020

Yan, M., Fan, Z. and Bevis, MJ. (1999) 'Erosion behaviour of Inconel 718 in molten A380 alloy'. Scripta Materialia, 40 (11). pp. 1255 - 1261. ISSN: 1359-6462

Benati, F., Butler, C., Gatti, S., Sacerdotti, F. and Yang, QP. (1999) 'A robot-based burr measurement system for the automotive industry'.IEEE Instrumentation and Measurement Technology Conference. Venice. ISSN: 1091-5281

Li, G., Cai, Y. and Zhou, X. (1999) 'The Influence of the Axial Deformation of Columns in the Frame Structure on the Drift and the Simplified Formulation'. Jisuan Lixue Xuebao/Chinese Journal of Computational Mechanics, 16. pp. 41 - 44. ISSN: 1007-4708

Walton, AJ., Stevenson, JTM., Haworth, LI., Fallon, M., Evans, PSA., Ramsey, BJ. and Harrison, D. et al. (1999) 'Characterisation of offset lithographic films using microelectronic test structures'. IEICE Transactions on Electronics, E82-C (4). pp. 576 - 581. ISSN: 0916-8516

Lu, G., Siores, E. and Wang, B. (1999) 'An empirical equation for crack formation in the laser cutting of ceramic plates'. Journal of Materials Processing Technology, 88 (1-3). pp. 154 - 158. ISSN: 0924-0136

Li, G., Shen, Z., Ding, X., Zhou, X., Chen, Y., Zhang, F. and Zhou, J. et al. (1999) 'Shaking Table Experimental Study on R2 Steel Roof Model of Shanghai Pudong International Airport Terminal Subjected to Three Dimensional Earthquakes'. Jianzhu Jiegou Xuebao/Journal of Building Structures, 20 (2). pp. 18 - 27. ISSN: 1000-6869

Miller, JF., Kalganova, T., Lipnitskaya, N. and Job, D. (1999) 'The genetic algorithm as a discovery engine: Strange circuits and new principles'. Proceedings of the AISB Symposium on Creative Evolutionary Systems (CES’99). pp. 65 - 74.Open Access Link

Rees, DWA. (1999) 'Limiting formability of orthotropic sheet metal'.1st International Conference on Component Optimisations- from Material Properties and Simulation Software (COMPASS 1999). Swansea, UK. 29 - 1 April. ENGINEERING MATERIALS ADVISORY SERVICES LTD. pp. 97 - 104.

Grant, S. (1999) '“Mixed Motives in Supply Chain Partnerships’’'.IPSERA 8th Annual Conference. Ireland March 1999. [unpublished]

Cesar de Sa, JMA., Natal Jorge, RM., Costa Sousa, L. and Cardoso, RP. (1999) 'Enhanced Strain Elements in Adaptive Solutions for Incompressible Forming Processes'.International Conference on Integrity - Reliability - Failure.

Chiodo, JD., Billett, EH. and Harrison, DJ. (1999) 'Preliminary investigations of active disassembly using shape memory polymers'.1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 99). Tokyo, Japan. 1 - 3 February. IEEE. pp. 590 - 596.

Bonser, RHC., Norman, AP. and Rayner, JMV. (1999) 'Does substrate quality influence take-off decisions in Common Starlings?'. Functional Ecology, 13 (1). pp. 102 - 105. ISSN: 0269-8463