Winter, M., Wei, J. and Yang, W. (2017) 'Stable spike clusters for the precursor Gierer-Meinhardt system in R2'. Calculus of Variations and Partial Differential Equations, 56 (6). pp. 142. ISSN: 0944-2669 Open Access Link

Dieringa, H., Katsarou, L., Buzolin, R., Szakács, G., Horstmann, M., Wolff, M., Mendis, C., Vorozhtsov, S. and StJohn, D. et al. (2017) 'Ultrasound assisted casting of an AM60 based metal matrix nanocomposite, its properties, and recyclability'. Metals, 7 (10). pp. 388 - 388. ISSN: 2075-4701 Open Access Link

Jouhara, H., Nannou, T., Anguilano, L., Krzyżyńska, R., Ghazal, H. and Spencer, N. (2017) 'Potentials of pyrolysis processes in the waste management sector'.1st International Conference on Sustainable Energy and Resource Use in Food Chains. Berkshire, UK. 20 - 20 April. Elsevier BV. pp. 87 - 94. ISSN: 1876-6102 Open Access Link

Mita, K., Miyatake, M., Atherton, M., Mares, C., Yoshimoto, S. and Stolarski, T. (2017) 'Non-contact Handling Equipment Utilising Ultrasonic Vibration'.World Tribology Congress. Beijing, China. 17 - 22 September.Open Access Link

Silver, J., Marsh, PJ., Fern, GR., Ireland, TG. and Salimian, A. (2017) 'ZnCdS:Cu,Al,Cl: A Near Infra-Red Emissive Family of Phosphors for Marking, Coding, and Identification'. JES Journal Solid State Science and Technology, 7 (1). pp. R3057 - R3063. ISSN: 2162-8769 Open Access Link

Fang, CM., Mohammadi, V., Nihtianov, S. and Sluiter, MHF. (2017) 'Stability, local structure and electronic properties of borane radicals on the Si(1 0 0)'. Computational Materials Science, 140. pp. 253 - 260. ISSN: 0927-0256 Open Access Link

Dong, W., Zhou, X. and Yuan, W. (2017) 'Influence of Specimen Geometry and Boundary Condition on Cracking of Concrete in Restrained Elliptical Ring Test'.2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures (EAC02). Brussels, Belgium. 14 - 14 September.

Winful, DA., Cashell, KA., Afshan, S., Barnes, AM. and Pargeter, RJ. (2017) 'Material properties of high strength steel under fire conditions'.EUROSTEEL 2017. Copenhagen, Denmark. 13 - 15 September. Wiley. pp. 2668 - 2677. ISSN: 2509-7075 Open Access Link

Winful, DA., Afshan, S., Cashell, KA., Barnes, AM. and Pargeter, RJ. (2017) 'Flexural buckling behaviour of high strength steel columns under fire conditions'.EUROSTEEL 2017. Copenhagen, Denmark. 13 - 15 September. Wiley. pp. 1 - 9. ISSN: 2509-7075 Open Access Link

Zhou, X., Kastiukas, G. and Wang, Y. (2017) 'Testing Rheological Properties of Alkali-activated Cement using the Direct Shear Box Test'.37th Cement & Concrete Science Conference. University College London, UK. 12 - 12 September.

Areir, M., Xu, Y., Harrison, D. and Fyson, J. (2017) '3D printing of highly flexible supercapacitor designed for wearable energy storage'. Materials Science and Engineering: B, 226. pp. 29 - 38. ISSN: 0921-5107 Open Access Link

Kastiukas, G., Zhou, X. and Sulaiman, F. (2017) 'Energy Storing Aggregates from Construction and Demolition Waste'.37th Cement & Concrete Science Conference. University College London, UK. 11 - 12 September.

Al-Helal, K., Fan, Z. and Stone, I. (2017) 'Refinement and Modification of Silicon Phases in Solidification of High Purity Hypereutectic Al-15si Alloy'.Liquid Metal Processing & Casting Conference 2017. Philadelphia, Pennsylvania, USA. 10 - 13 September. Proceedings of the Liquid Metal Processing & Casting Conference 2017. pp. 281 - 286.Open Access Link

Atherton, M., Jiang, P., Harrison, D. and Malizia, A. (2017) 'Design for invention: annotation of Functional Geometry Interaction for representing novel working principles'. Research in Engineering Design, 29 (2). pp. 245 - 262. ISSN: 0934-9839 Open Access Link

Mikhailov, S. and Portillo, CF. (2017) 'A New Family of Boundary-Domain Integral Equations for the Mixed Exterior Stationary Heat Transfer Problem with Variable Coefficient', in Constanda, C., Dalla Riva, M., Lamberti, PD. and Mosolino, P. (eds.) Integral Methods in Science and Engineering, Volume 1 Theoretical Techniques. Birkhäuser. , 1. pp. 215 - 226. ISBN 10: 3319593846. ISBN 13: 9783319593838.

Ayele, TG., Dufera, TT. and Mikhailov, S. (2017) 'Analysis of Boundary-Domain Integral Equations for Variable-Coefficient Neumann BVP in 2D', in Constanda, C., Dalla Riva, M., Lamberti, PD. and Musolino, P. (eds.) Integral Methods in Science and Engineering, Volume 1 Theoretical Techniques. Birkhäuser. , 1. pp. 21 - 33. ISBN 10: 3319593846. ISBN 13: 9783319593838. Open Access Link

Su, SS. and Chang, I. (2017) 'Review of production routes of nanomaterials', inCommercialization of Nanotechnologies-A Case Study Approach. Springer International Publishing. pp. 15 - 29. ISBN 13: 9783319569789.

Angulo, A., Allwright, J., Mares, C., Gan, T-H. and Soua, S. (2017) 'Finite Element Analysis of Crack Growth for Structural Health Monitoring of Mooring Chains using Guided Waves and Acoustic Emission'.2nd International Congress in Structural Integrity ICSI 2017. Funchal, Madeira, Portugal. 6 - 7 September. Elsevier BV. pp. 1 - 8. ISSN: 2452-3216 Open Access Link

Areir, M., Xu, Y., Harrison, D. and Fyson, J. (2017) 'A study of 3D printed flexible supercapacitors onto silicone rubber substrates'. Journal of Materials Science: Materials in Electronics, 28 (23). pp. 18254 - 18261. ISSN: 0957-4522 Open Access Link

Lam, B. (Accepted) 'Applying strategic design as a holistic approach to investigate and address real world challenges'. Strategic Design Research Journal, 10 (2).Open Access Link

Lam, B., Zamenopoulos, T., Kelemen, M. and Na, J. (2017) 'Unearth Hidden Assets through Community Co-design and Co-production'.The European Academy of Design. Rome. 6 - 14 April. Informa UK Limited. pp. S3601 - S3610. ISSN: 1460-6925 Open Access Link

Na, J., Choi, Y., Walters, A., Lam, B. and Green, S. (2017) 'Creating a Tool for Measuring the Social Value of Design'.Design for Next: 12th EAD Conference. Rome. 6 - 14 April. Informa UK Limited. pp. 1662 - 1672. ISSN: 1460-6925 Open Access Link

Ren, Y., Cheng, W., Wang, Y. and Wang, B. (2017) 'Analysis of flexural behavior of a simple supported thin beam under concentrated multiloads using trigonometric series method'. Thin-Walled Structures, 120. pp. 124 - 137. ISSN: 0263-8231 Open Access Link

Yasseri, SF., Bahai, H. and Mahani, RB. (2017) 'Inspection planning of offshore steel jacket structures for fatigue damage'. International Journal of Offshore and Polar Engineering, 27 (3). pp. 252 - 259. ISSN: 1053-5381

Rahmati, MT., Norouzi, S., Bahai, H. and Alfano, G. (2017) 'Experimental and numerical study of structural behavior of a flexible riser model'. Applied Ocean Research, 67. pp. 162 - 168. ISSN: 0141-1187

Wang, L., Yang, L., Zhang, D., Xia, MING-XU., Wang, YUN., Chen, B. and Li, J-G. et al. (2017) 'Nucleation interface of Al−Sb alloys on single crystal Al2O3 substrate'. Transactions of Nonferrous Metals Society of China, 27 (9). pp. 2104 - 2111. ISSN: 1003-6326

Cheng, K., Niu, ZC., Wang, RC., Rakowski, R. and Bateman, R. (2017) 'Smart Cutting Tools and Smart Machining: Development Approaches, and Their Implementation and Application Perspectives'. Chinese Journal of Mechanical Engineering (English Edition), 30 (5). pp. 1162 - 1176. ISSN: 1000-9345 Open Access Link

Qin, SF. and Cheng, K. (2017) 'Special Issue on Future Digital Design and Manufacturing: Embracing Industry 4.0 and Beyond-Part II'. Chinese Journal of Mechanical Engineering (English Edition), 30 (5). pp. 1045 - 1046. ISSN: 1000-9345

Qin, SF. and Cheng, K. (2017) 'Future Digital Design and Manufacturing: Embracing Industry 4.0 and Beyond'. Chinese Journal of Mechanical Engineering (English Edition), 30 (5). pp. 1047 - 1049. ISSN: 1000-9345

Na, JH., Choi, Y. and Harrison, D. (2017) 'The design innovation spectrum: An overview of design influences on innovation for manufacturing companies'. International Journal of Design, 11 (2). pp. 13 - 24. ISSN: 1994-036X Open Access Link

Wang, D., Zhou, X., Meng, Y. and Chen, Z. (2017) 'Durability of concrete containing fly ash and silica fume against combined freezing-thawing and sulfate attack'. Construction and Building Materials, 147. pp. 398 - 406. ISSN: 0950-0618 Open Access Link

Wang, G., Wang, Q., Easton, MA., Dargusch, MS., Qian, M., Eskin, DG. and StJohn, DH. et al. (2017) 'Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium'. Scientific Reports, 7 (1). pp. 9729 - 9729. ISSN: 2045-2322 Open Access Link

Shamass, R. and Cashell, KA. (2017) 'Behaviour of Composite Beams Made Using High Strength Steel'. Structures, 12. pp. 88 - 101. ISSN: 2352-0124 Open Access Link

Winful, DA., Cashell, KA., Afshan, S., Barnes, AM. and Pargeter, RJ. (2017) 'Elevated temperature material behaviour of high strength steel'. Proceedings of the ICE - Structures and Buildings, 170 (11). pp. 777 - 787. ISSN: 1751-7702 Open Access Link

Kalganova, T. and BRAATHEN DE CARVALHO, K. (2017) 'PROJETO DE UM BRAÇO ROBÓTICO COM SEIS GRAUS DE LIBERDADE'. The Journal of Engineering and Exact Sciences, 3 (5).Open Access Link

Sreekumar, VM., Nadendla, HB. and Eskin, D. (2017) 'Prospects of in-situ α-Al2O3 as an inoculant in Aluminium- a feasibility study'. Journal of Materials Engineering and Performance, 26 (9). pp. 4166 - 4176. ISSN: 1059-9495 Open Access Link

Jiang, P., Atherton, M., Harrison, D. and Malizia, A. (2017) 'Framework of mechanical design knowledge representations for avoiding patent infringement'.ICED17 21st International Conference on Engineering Design. University of British Columbia, Vancouver, Canada. 21 - 25 August. Proceedings of the International Conference on Engineering Design, ICED. pp. 81 - 90. ISSN: 2220-4334 Open Access Link

Turabzadeh, S., Meng, H., Swash, RM., Pleva, M. and Juhar, J. (2017) 'Real-time Emotional State Detection from Facial Expression on Embedded Devices'.Seventh International Conference on Innovative Computing Technology (INTECH 2017). Luton, UK. 16 - 18 August. IEEE. pp. 1 - 5.Open Access Link

Vignjevic, R., Djordjevic, N. and Wasilczuk, A. (2017) 'Damage Characterisation at Meso and Continuum Scales for Unidirectional Composites'.First international Workshop on Dynamic Response of Composite Materials. Taormina, Italy.

Dong, W., Zhou, X., Wu, Z., Luo, H. and Kastiukas, G. (2017) 'Quantifying the Influence of Elliptical Ring Geometry on the Degree of Restraint in A Ring Test'. Computers and Structures, 207. pp. 111 - 120. ISSN: 0045-7949 Open Access Link

Cavazzuti, M., Ramachandran, S., Koenig, C., Atherton, M., Halliday, I., Schenkel, T., Shipman, K. and Strange, R. et al. (2017) 'Method validation of an ultrasound (US) approach to assess velocity profile as a marker of atherosclerotic burden'.MEIBioeng/MPEC2017. Sandown Racecourse, Esher, Surrey.Open Access Link

Wang, L., Lu, W., Hu, Q., Xia, M., Wang, Y. and Li, J-G. (2017) 'Interfacial tuning for the nucleation of liquid AlCu alloy'. Acta Materialia, 139. pp. 75 - 85. ISSN: 1359-6454

Bull, J. and Zhou, X. (2017) 'Concrete in Extreme Environments'. Dunbeath Mill, Dunbeath, Caithness, Scotland. KW6 6EG UK: Whittles Publishing. ISSN 13: 978-184995-327-6

Liu, D., Liu, Y., Zhao, Y., Huang, Y. and Chen, M. (2017) 'The hot deformation behavior and microstructure evolution of HA/Mg-3Zn-0.8Zr composites for biomedical application'. Materials Science and Engineering C, 77. pp. 690 - 697. ISSN: 0928-4931

Ren, Y., Cheng, W., Wang, Y. and Wang, B. (2017) 'Analysis of the distortion of cantilever box girder with inner flexible diaphragms using initial parameter method'. Thin-Walled Structures, 117. pp. 140 - 154. ISSN: 0263-8231 Open Access Link

Huang, Y. (2017) 'Steady state and a general scale law of deformation'.38th Riso International Symposium on Materials Science. Riso, DENMARK. 1 - 8 September. IOP Publishing. pp. 012029 - 012029. ISSN: 1757-8981 Open Access Link

Haddadpour, M., Daneshavar, S. and Seyedarabi, H. (2017) 'PET and MRI image fusion based on combination of 2-D Hilbert transform and IHS method'. Biomedical Journal, 40 (4). pp. 219 - 225. ISSN: 2319-4170

König, C., Ramachandran, S., Cavazzuti, M., Atherton, M. and Gomm, C. (2017) 'Method validation of an ultrasound (US) approach to assess velocity profile as a marker of atherosclerotic burden'.AstraZeneca CVMD Research Summit 2017. Rome, Italy.

Jouhara, H., Czajczyńska, D., Ghazal, H., Krzyżyńska, R., Anguilano, L., Reynolds, AJ. and Spencer, N. et al. (2017) 'Municipal waste management systems for domestic use'. Energy, 139. pp. 485 - 506. ISSN: 0360-5442 Open Access Link

Kotadia, HR., Qian, M., Eskin, DG. and Das, A. (2017) 'On the microstructural refinement in commercial purity Al and Al-10 wt% Cu alloy under ultrasonication during solidification'. Materials & Design, 132. pp. 266 - 274. ISSN: 0264-1275 Open Access Link

Cardoso, RP. and Adetoro, OB. (2017) 'On Contact Modelling in IsoGeometric Analysis'. European Journal of Computational Mechanics, 26 (5-6). pp. 443 - 472. ISSN: 1779-7179 Open Access Link