Sun, X., Chen, S. and Cheng, K. (2005) 'An analytic design and calculation method for the aerostatic slideways'. Laser Metrology and Machine Performance VII 7th International Conference and Exhibition on Laser Metrology Machine Tool Cmm and Robotic Performance Lamdamap 2005. pp. 344 - 353.

Stomeo, E., Kalganova, T., Lambert, C., Lipnitsakya, N. and Yatskevich, Y. (2005) 'On evolution of relatively large combinational logic circuits'.2005 NASA/DoD Conference on Evolvable Hardware (EH'05). IEEE. IEEE. pp. 59 - 66. ISSN: 1550-6029 Open Access Link

Reddy, ES., Babu, NH., Shi, Y. and Cardwell, DA. (2005) 'Effect of size, morphology and crystallinity of seed crystal on the nucleation and growth of single grain Y-Ba-Cu-O'. Journal of the European Ceramic Society, 25 (12 SPEC. ISS.). pp. 2935 - 2938. ISSN: 0955-2219

Pezeshki, V., Mousavi, A. and Rakowski, R. (2005) 'Profitability through customer relationship marketing'.International Conference in Computer and Industrial Management (ICIM). Bangkok, Thailand. [unpublished]

Yang, Q. (2005) 'Designing the sensor interface', in Sydenham, P. and Thorn, R. (eds.) Handbook of measuring system design. Wiley. , 2. ISBN 10: 0470021438. ISBN 13: 978-0470021439. Open Access Link

Giacomin, J. (2005) 'Self-reported upper body discomfort due to driving: Effect of driving experience, gender and automobile age'. Zeitschrift fur Arbeitswissenschaft, 5. pp. 409 - 418.Open Access Link

Silver, J., Withnall, R., Rose, J., Wilstead, N., Fern, G., Bishton, S., Klein, D., Rhodes, B., Barclay, C. and Whitmarsh, J. et al. (2005) 'Broad-band green phosphor screens as a light source for head up displays in moving platforms'.SPIE.  [unpublished]

Zhou, X., Mickleborough, N. and Li, Z. (2005) 'Shear strength of joints in precast concrete segmental bridges'. ACI Structural Journal, 102 (1). pp. 3 - 11. ISSN: 0889-3241

Adedoyin, S., Fernando, WAC., Arachchi, HK., Kalganova, T. and Loo, K-K. (2005) 'An evolutionary strategy based motion estimation algorithm for H. 264 video codecs'.Canadian Conference on Electrical and Computer Engineering, 2005.. IEEE. IEEE. pp. 927 - 930. ISSN: 0840-7789 Open Access Link

Reddy, ES., Babu, NH., Iida, K., Withnell, TD., Shi, Y. and Cardwell, DA. (2005) 'The effect of size, morphology and crystallinity of seed crystals on the nucleation and growth of Y-Ba-Cu-O single-grain superconductors'. Superconductor Science and Technology, 18 (1). pp. 64 - 72. ISSN: 0953-2048

Babu, NH., Iida, K., Shi, Y. and Cardwell, DA. (2005) 'Fabrication of high performance light rare earth based single-grain superconductors in air'. Applied Physics Letters, 87 (20). pp. 1 - 3. ISSN: 0003-6951

de Cesare, S., Lycett, MG. and Macredie, RD. (2005) 'The development of component-based information systems'. New York: ME Sharpe. ISSN 10: 0-7656-1248-8 ISSN 13: 9780765612489

Wei, J. and Winter, M. (2005) 'On a cubic-quintic Ginzburg-Landau equation with global coupling'. Proceedings of the American Mathematical Society, 133. pp. 1787 - 1796. ISSN: 0002-9939 Open Access Link

Short, A., Hopkinson, G., Laborie, A., Pouny, P., Vetel, C., Eaton, T., Steward, R., Holland, A., Hutchinson, I., SMITH, D., de Bruijne, J., Gare, P., Perryman, M., Sarri, G. and Zayer, I. et al. (2005) 'Gaia astrometric CCDs and focal plane'.FPA Applications in Space Systems. San Diego. SPIE. pp. 1 - 14. ISSN: 0277-786X

Luo, X., Cheng, K., Webb, D. and Wardle, F. (2005) 'Design of ultraprecision machine tools with applications to manufacture of miniature and micro components'. Journal of Materials Processing Technology, 167 (2-3). pp. 515 - 528. ISSN: 0924-0136 Open Access Link

Ji, S., Zhen, Z. and Fan, Z. (2005) 'Effects of rheo-die casting process on the microstructure and mechanical properties of AM50 magnesium alloy'. Materials Science and Technology, 21 (9). pp. 1019 - 1024. ISSN: 0267-0836

Yang, Q. (2005) 'A novel representation of energy and signal transformation in measurement systems'. IEEE Transactions on Instrumentation and Measurement, 54 (1). pp. 432 - 435. ISSN: 0018-9456 Open Access Link

Fan, Z., Liu, G. and Hitchcock, A. (2005) 'Solidification behaviour under intensive forced convection'. Materials Science and Engineering: A, 413-414. pp. 229 - 235. ISSN: 0921-5093

De Coster, R. (2005) 'Technology innovation trends affecting high technology development in emerging sectors'.Challenges of Organisations in Global Markets Conference.  [unpublished]

Wei, J. and Winter, M. (2005) 'Symmetry of nodal solutions for singularly perturbed elliptic problems on a ball'. Indiana University Mathematics Journal, 54 (3). pp. 707 - 742. ISSN: 0022-2518 Open Access Link

Martin, VA., Hatzakis, T., Lycett, M. and Macredie, R. (2005) 'Cultivating knowledge sharing through the relationship management maturity model'. The Learning Organization: An International Journal, 12 (4). pp. 340 - 354. ISSN: 0969-6474 Open Access Link

Shoniregun, C., Logvynovskiy, O. and Lu, K. (2005) 'Securing XML query processing storage'. Australasian Journal of Information Systems, 13 (1). pp. 150 - 158. ISSN: 1449-8618

Mitchell, TJF., Chen, SY. and Macredie, RD. (2005) 'Hypermedia learning and prior knowledge: domain expertise vs. system expertise'. Journal of Computer Assisted Learning, 21 (1). pp. 53 - 64. ISSN: 0266-4909 Open Access Link

Fan, Z. and Liu, G. (2005) 'Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process'. Acta Materialia, 53 (16). pp. 4345 - 4357. ISSN: 1359-6454

Basra, R. and LU, KJ. (2005) 'Resolving Scheduling Issues for London Underground Using Multi-agent Techniques'.In the proceedings of 2nd Holmas, (Lecture Notes in Computer Science 3593) pp.188-196.. Copenhagen,. Springer.

Ivanov, A., Pham, DT., Dimov, S. and Bigot, S. (2005) 'Micro EDM drilling: accuracy study', in Bramley, AN. (ed.) Advances in Integrated Design and Manufacturing in Mechanical Engineering. Kluwer Academic Pub. pp. 281 - 294. ISBN 10: 1402034814. ISBN 13: 9781402034817.

Zong, WJ., Li, D., Wang, HX., Sun, T., Cheng, K. and Chen, MJ. (2005) 'Time series analysis for the mechanical lapping of single crystal diamond cutting tools'. Key Engineering Materials, 291-292. pp. 331 - 336. ISSN: 1013-9826

Gutub, AA-A. and Kalganova, T. (2005) 'Speeding Up a Scalable Modular Inversion Hardware Architecture'. Place of publication: KFUPM.Open Access Link

(2005) 'Five Discussions from the January/February 2005 ACI Structural Journal'. ACI Structural Journal, 102 (6). ISSN: 0889-3241

Das, A. and Fan, ZY. (2005) 'Semi-solid processing of metallic alloys', inDeformation and Processing of Structural Materials A Volume in Woodhead Publishing Series in Civil and Structural Engineering. pp. 252 - 283.

Daneshvar, S. and Ghassemian, H. (2005) 'A hybrid algorithm for medical image registration'.2005 IEEE Engineering in Medicine and Biology 27th Annual Conference. Shanghai, PEOPLES R CHINA. 1 - 18 January. IEEE. pp. 3272 - 3275. ISSN: 0589-1019

Kazilas, MC., Skordos, AA. and Partridge, IK. (2005) 'Parameter estimation in equivalent circuit analysis of dielectric cure monitoring signals using genetic algorithms'. Inverse Problems in Science and Engineering, 13 (2). pp. 157 - 176. ISSN: 1741-5977

Dowlen, C. and Atherton, M. (2005) 'What is Design?', in Collins, MW., Atherton, MA. and Bryant, JA. (eds.) Nature and Design. Southampton : WIT Press. , 1. pp. 1 - 15. ISBN 10: 185312852X.

Vignjevic, R., Lepage, S. and De Vuyst, T. (2005) 'Simulation of high velocity impacts on thin metallic targets II (Discrete elements)'.International Conference on Impact Loading of Lightweight Structures. Florianopolis, BRAZIL. 1 - 12 May. WIT PRESS. pp. 575 - 582. ISSN: 1746-4471

Vignjevic, R., Lepage, S. and De Vuyst, T. (2005) 'Simulation of high velocity impacts on thin metallic targets I (Element erosion)'.International Conference on Impact Loading of Lightweight Structures. Florianopolis, BRAZIL. 1 - 12 May. WIT PRESS. pp. 563 - 574. ISSN: 1746-4471

Vignjevic, R., Lepage, S. and De Vuyst, T. (2005) 'Simulation of high velocity iipacts on thin metallic targets III (SPH)'.International Conference on Impact Loading of Lightweight Structures. Florianopolis, BRAZIL. 1 - 12 May. WIT PRESS. pp. 583 - 594. ISSN: 1746-4471

Chong, TP. and Zhong, S. (2005) 'On the three dimensional structure of turbulent spots'. ASME Transactions: Journal of Turbomachinery, 127. pp. 545 - 551.

Kalganova, T. (2005) 'SPEEDING UP A SCALABLE MODULAR INVERSION HARDWARE ARCHETECTURE'. .

Eskin, DG., Savran, VI. and Katgerman, L. (2005) 'Erratum: "Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy" (Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2005) vol. 36A (1965-1976))'. Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 36 (9). pp. 2561. ISSN: 1073-5623

Ivanov, A., Herrero, A., Goenaga, I., Azcarate, S., Uriate, L. and Rees, A. (2005) 'Mechanical micromachining by milling, wire EDM, die-sinking EDM and diamond turning'.MIT'2005. Fiesa -Slovenia.

Zhou, X. and Li, Z. (2005) 'Characterization of Rheology of Fresh Fiber Reinforced Cementitious Composites through Ram Extrusion'. Materials and Structures, 38 (1). pp. 17 - 24. ISSN: 1359-5997

Eskin, DG., Du, Q., Ruvalcaba, D. and Katgerman, L. (2005) 'Experimental study of structure formation in binary Al-Cu alloys at different cooling rates'. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 405 (1-2). pp. 1 - 10. ISSN: 0921-5093

Mitrovic, IZ., Buiu, O., Hall, S., Zhang, J., Wang, Y., Hemment, PLF., El Mubarek, HAW. and Ashburn, P. et al. (2005) 'Electrical and materials characterization of GSMBE grown Si 1-x-yGexCy layers for heterojunction bipolar transistor applications'. Semiconductor Science and Technology, 20 (1). pp. 95 - 102. ISSN: 0268-1242

Aziz, M. and Macredie, RD. (2005) 'Proposing a perceived ease of use factors taxonomy for information system use'.IEEE SoutheastCon, 2005.. Ft Lauderdale, FL. 1 - 10 April. IEEE. pp. 468 - 476. ISSN: 1091-0050

Shahverdi, H., Mares, C. and Mottershead, JE. (2005) 'Model structure correction and updating of aeroengine casings using fictitious mass modifications'. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 219 (1). pp. 19 - 30. ISSN: 0954-4062

Davis, G., Bulson, H., Harrison, D. and Billett, E. (2005) 'An evaluation of degradable polyethylene (pe) sacks in open windrow composting'. Compost Science and Utilization, 13 (1). pp. 50 - 59. ISSN: 1065-657X

Giacomin, J. and Woo, YJ. (2005) 'Schwingungsdynamik des Lenksystems Verbesserung von Information und Wahrnehmung'. ATZ Automobiltechnische Zeitschrift, 107 (5). pp. 422 - 429. ISSN: 0001-2785

Petherbridge, K., Evans, P. and Harrison, D. (2005) 'The origins and evolution of the PCB: A review'. Circuit World, 31 (1). pp. 41 - 45. ISSN: 0305-6120

Eskin, DG., Savran, VI. and Katgerman, L. (2005) 'Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy'. Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 36 (7). pp. 1965 - 1976. ISSN: 1073-5623

Hutchings, IM., Xu, Y., Sánchez, E., Ibáñez, MJ. and Quereda, MF. (2005) 'Development of surface finish during the polishing of porcelain ceramic tiles'. Journal of Materials Science, 40 (1). pp. 37 - 42. ISSN: 0022-2461

Pichugin, AV., Tyas, A., MacPherson, WN., Watson, S. and Barton, JS. (2005) 'Scaled shock measurements using micro-scale fibre optic pressure transducers'.Sixth Asia-Pacific Conference on Shock and Impact Loads on Structures. Perth, Australia. [unpublished]