IMM
Pedram, SK., Mudge, P. and Gan, TH. (2018) 'Enhancement of ultrasonic guided wave signals using a split-spectrum processing method'. Applied Sciences (Switzerland), 8 (10). pp. 1 - 17. ISSN: 2076-3417 Open Access Link
Zhang, B., Li, S., Huang, Z., Rahi, BH., Wang, Q. and Li, M. (2018) 'Transfer learning-based online multiperson tracking with Gaussian process regression'. Concurrency Computation, 30 (23). ISSN: 1532-0626 Open Access Link
Khan, MA., Jiang, L., Cashell, KA. and Usmani, A. (2018) 'Analysis of restrained composite beams exposed to fire using a hybrid simulation approach'. Engineering Structures, 172. pp. 956 - 966. ISSN: 0141-0296 Open Access Link
Abdallah, S., Fan, M. and Rees, DWA. (2018) 'Predicting pull-out behaviour of 4D/5D hooked end fibres embedded in normal-high strength concrete'. Engineering Structures, 172. pp. 967 - 980. ISSN: 0141-0296
Huang, Y., Li, J. and Zhou, L. (2018) 'Mg–3Zn–0.5Zr/HA nanocomposites fabricated by high shear solidification and equal channel angular extrusion'. Materials Science and Technology, 34 (15). pp. 1868 - 1879. ISSN: 0267-0836
Alabi, AA., Moore, PL., Wrobel, LC., Campbell, JC. and He, W. (2018) 'Influence of Loading Rate on the Fracture Toughness of High Strength Structural Steel'.22nd European Conference on Fracture. Belgrade, Serbia. 1 - 31 August. Elsevier BV. pp. 877 - 885. ISSN: 2452-3216 Open Access Link
Prompalit, S., Fruhwirth, G., Rhode, K. and Noh, Y. (2018) 'Development of Non-Contact Device Based on Optical Fibre Technology for Detecting Respiration of Small Animal in Imaging Instruments'.2018 IEEE Sensors. IEEE. pp. 1 - 4. ISSN: 1930-0395
Osman, D., Fruhwirth, G., Rhode, K. and Noh, Y. (2018) 'Development of a Respiration Monitor Based on Fibre Optics & CCD Camera for Small Animal Preclinical Imaging'.2018 IEEE Sensors. IEEE. pp. 1 - 4. ISSN: 1930-0395
Lam, B. and Pitsaki, I. (2018) 'Co‐Design for the Development of New Knowledge and Practices in Not‐for‐Profit Organizations'. Design Management Journal, 13 (1). pp. 70 - 82. ISSN: 1942-5074
Fang, CM., Men, H. and Fan, Z. (2018) 'Effect of Substrate Chemistry on Prenucleation'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (12). pp. 6231 - 6242. ISSN: 1073-5623 Open Access Link
Jovicic, G., Vukicevic, A., Filipovic, N., Djordjevic, N. and Vignjevic, R. (2018) 'Assessment of Structural Integrity of a Composite Mandibula under Impact Loading'.Second International Workshop on Dynamic Response of Composite Materials. Ischia, Italy. 27 - 28 September.
Anguilano, L., McKay, B., Minton, T., Barekar, N. and Adole, O. (Accepted) 'Method for Forming Metal Matrix Composites'.
Rees, DWA. (2018) 'The Mechanics of Elastic Solids'. Wspc (Europe). ISSN 10: 1786346168 ISSN 13: 9781786346162
Wang, J., Andrews, P., Butler, C., McAlpine, E., Scamans, G. and Zhou, X. (2018) 'Optical cleanliness measurement methods for aluminium sheet surfaces'. Surface and Interface Analysis, 51 (12). pp. 1144 - 1153. ISSN: 0142-2421 Open Access Link
Dong, X., Yang, H., Zhu, X. and Ji, S. (2018) 'High strength and ductility aluminium alloy processed by high pressure die casting'. Journal of Alloys and Compounds, 773. pp. 86 - 96. ISSN: 0925-8388 Open Access Link
Eskin, DG. and Mi, J. (2018) 'Solidification Processing of Metallic Alloys Under External Fields'. Springer. ISSN 10: 3319948415 ISSN 13: 9783319948416
Eskin, D. (2018) 'Basics of solidification processing of metallic alloys', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 1 - 17. ISBN 10: 3319948415. ISBN 13: 9783319948416.
Eskin, D. and Tzanakis, I. (2018) 'High frequency vibration and ultrasonic processing', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 153 - 193. ISBN 10: 3319948415.
Dahlborg, U., Calvo-Dahlborg, M., Eskin, D. and Popel, P. (2018) 'Thermal melt processing of metallic alloys', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 277 - 315. ISBN 10: 3319948415.
Fairclough, HE., Gilbert, M., Pichugin, A., Tyas, A. and Firth, I. (2018) 'Theoretically optimal forms for very long span bridges under gravity loading'. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 474 (2217). pp. 1 - 21. ISSN: 1364-503X Open Access Link
Adetoro, OB. (2018) 'Analytical friction model for sliding bodies with coupled longitudinal and transverse vibration'.6th Asia International Conference on Tribology (ASIATRIB2018). Kuching, Sarawak - Malaysia. 17 - 20 September. Proceedings of the 6th Asia International Conference on Tribology, pp. 1-2, September 2018.Open Access Link
Lu, KJ. (2018) 'Decision Making under Uncertainty through Extending Influence Diagrams with Interval-valued Parameters'. Expert Systems: the journal of knowledge engineering, 35 (4). pp. 1 - 15. ISSN: 0266-4720 Open Access Link
Jiang, P., Atherton, M., Sorce, S., Harrison, D. and Malizia, A. (2018) 'Design for Invention: A framework for identifying emerging design-prior art conflict'. Journal of Engineering Design, 29 (10). pp. 596 - 615. ISSN: 0954-4828 Open Access Link
Alghababsheh, M., Gallear, D. and Rahman, M. (2018) 'Balancing the scales of justice: Do perceptions of buyers' justice drive suppliers' social performance?'. Jornal of Business Ethics, 163 (1). pp. 125 - 150. ISSN: 0167-4544 Open Access Link
Kostan, M., Dhutti, A., Niu, X., Duan, W., Kourmpetis, M., Kanfoud, J. and et al. (2018) 'Autonomous ice protection combining ultrasonic guided waves and electrothermal systems'.NDT 2018 - 57th Annual British Conference on Non-Destructive Testing. Nottingham, UK. 10 - 12 September. Proceedings of the 57th Annual Conference of the British Institute of Non-Destructive Testing (NDT 2018). pp. 100 - 111.Open Access Link
Winful, D., Cashell, KA., Afshan, S., Barnes, AM. and Pargeter, RJ. (2018) 'Behaviour of high strength steel columns under fire conditions'. Journal of Constructional Steel Research, 150. pp. 392 - 404. ISSN: 0143-974X Open Access Link
den Engelsen, D., Fern, GR., Ireland, TG., Hudry, D., Abeykoon, AMM., Nykypanchuk, D., et al. (2018)
'Ultrathin Y
Bhagurkar, AG., Yamamoto, A., Wang, L., Xia, M., Dennis, AR., Durrell, JH., et al. (2018) 'High Trapped Fields in C-doped MgB2 Bulk Superconductors Fabricated by Infiltration and Growth Process'. Scientific Reports, 8 (1). pp. 1 - 12. ISSN: 2045-2322 Open Access Link
Wang, J., Yang, H., Liu, Z., Ji, S., Li, R. and Ruan, J. (2018)
'A novel Fe
Al-Sadawi, L., Chong, TP. and Kim, J-H. (2018) 'Aerodynamic noise reduction by plasma actuators for a flat plate with blunt trailing edge'. Journal of Sound and Vibration, 439. pp. 173 - 193. ISSN: 0022-460X Open Access Link
Tanaka, M., Cardoso, RP. and Bahai, H. (2018) 'Modification of the LSMPS Method for the conservation of the thermal energy in laser irradiation processes'. International Journal for Numerical Methods in Engineering, 117 (2). pp. 161 - 187. ISSN: 0029-5981 Open Access Link
Scamans, G. (2018) 'Electric vehicles spike demand for high strength aluminum extrusions'. Light Metal Age, 76 (5). pp. 6 - 12. ISSN: 0024-3345
Gong, C., Zhou, X., Dai, W., Liu, Y., Lu, L. and Cheng, X. (2018) 'Effects of carbamide on fluidity and setting time of sulphoaluminate cement and properties of planting concrete from sulphoaluminate cement'. Construction and Building Materials, 182. pp. 290 - 297. ISSN: 0950-0618
Vojdani, A., Farrahi, GH., Mehmanparast, A. and Wang, B. (2018) 'Probabilistic Assessment of Creep-Fatigue Crack Propagation in Austenitic Stainless Steel Cracked Plates'. Engineering Fracture Mechanics, 200. pp. 50 - 63. ISSN: 0013-7944 Open Access Link
Liu, Y., Xu, Y. and Qin, S. (2018) 'What are key components when creating an innovative crowdsourcing business model'.The 24th International Conference on Automation & Computing. Newcastle University. 1 - 7 September. IEEE. pp. 1 - 4.Open Access Link
Nobariyan, B., Amini, N., Daneshvar, S. and Abbasi, A. (2018) 'A novel architecture of medical image fusion based on YCbCr-DWT transform'. International Arab Journal of Information Technology, 15 (5). pp. 850 - 856. ISSN: 1683-3198
Jansen, G., Dehouche, Z., Corrigan, H. and Bonser, R. (2018) 'An Autonomous Solar PV/Wind/Regenerative Hydrogen Fuel Cell Energy Storage System for Cell Towers', in Shao, H. (ed.) Hydrogen Storage Preparation, Applications and Technology. Hauppauge, New York, USA : Nova Science Publishers. pp. 225 - 266. ISBN 10: 1536142204. ISBN 13: 978-1-5361-4220-4. Open Access Link
Duan, W., Kanfoud, J., Deere, M., Mudge, P. and Gan, T-H. (2018) 'Spectral subtraction and enhancement for torsional waves propagating in coated pipes'. NDT and E International, 100. pp. 55 - 63. ISSN: 0963-8695 Open Access Link
Dissanayake, M., Sattar, TP., Lowe, S., Pinson, I. and Gan, TH. (2018) 'Adaptable legged-magnetic adhesion tracked wheel robotic platform for misaligned mooring chain climbing and inspection'. Industrial Robot, 45 (5). pp. 634 - 646. ISSN: 0143-991X Open Access Link
Wang, L., Wu, G., Wang, B. and Pisarski, H. (2018) 'Fracture response of X65 pipes containing circumferential flaws in the presence of Lüders plateau'. International Journal of Solids and Structures, 156-157. pp. 29 - 48. ISSN: 0020-7683 Open Access Link
Geng, H., Wang, Z., Cheng, Y., Alsaadi, FE. and Dobaie, AM. (2018) 'State estimation under non-Gaussian Lévy and time-correlated additive sensor noises: A modified Tobit Kalman filtering approach'. Signal Processing, 154. pp. 120 - 128. ISSN: 0165-1684
Maier, P., Bechly, M., Mendis, CL. and Hort, N. (2018) 'Precipitation hardening on mechanical and corrosion properties of extruded Mg10Gd modified with Nd and La'. Metals, 8 (8). pp. 1 - 14. ISSN: 2075-4701 Open Access Link
Kastiukas, G., Zhou, X., Lantieri, C., Tataranni, P., Vaiana, R. and Sangiorgi, C. (2018) 'Mechanical and Thermal Performance of Macro-Encapsulated Phase Change Materials for Pavement Application'. Materials, 11 (8). pp. 1398 - 1398. ISSN: 1996-1944 Open Access Link
Yang, W., Ji, S., Zhang, R., Zhang, J. and Liu, L. (2018) 'Abnormal Grain Refinement Behavior in High-Pressure Die Casting of Pure Mg with Addition of Zr as Grain Refiner'. JOM, 70 (11). pp. 2555 - 2560. ISSN: 1047-4838 Open Access Link
Zhang, Y., Patel, JB., Wang, Y. and Fan, Z. (2018) 'Variation improvement of mechanical properties of Mg-9Al-1Zn alloy with melt conditioned high pressure die casting'. Materials Characterization, 144. pp. 498 - 504. ISSN: 1044-5803 Open Access Link
Lam, B. and Pitsaki, I. (2018) 'Co-design for the development of new knowledge and practices in not-for-profit organisations'.21st DMI: Academic Design Management Conference: Next Wave. London. 1 - 2 August. https://www.dmi.org/page/ADMC2018Proceedings. pp. 1455 - 1465.Open Access Link
Vignjevic, R., Djordjevic, N., De Vuyst, T., Appleby-Thomas, G., Wasilczuk, A. and Filipovic, N. (2018) 'Charaterisation of a Carbon Fibre Composite Material Under Shock Loading'.Second International Workshop on Dynamic Response of Composite Materials. Ischia, Italy.
Ghasemi, MM., Bahrami, M. and Daneshvar, S. (2018) 'TUNABLE NMR RECEIVER FRONT-END USING VARIABLE MEMS CAPACITOR'. Biomedical Engineering: Applications, Basis and Communications, 30 (04). pp. 1850036 - 1850036. ISSN: 1016-2372
Fan, Z. and Fang, C. (2018) 'A Comparative Study of Prenucleation on Zr and MgO Substrates by ab initio MD Simulations'.The 11th International Conference on Magnesium Alloys and their Applications. Old Windsor, UK. 1 - 27 July. Proceedings of the 11th International Conference on Magnesium Alloys and their Applications. pp. 41 - 50.Open Access Link
Hakim, L. and Mikhailov, SE. (2018) 'A history-dependent cohesive zone model in elastic and visco-elastic materials under constant and variable loading'. International Journal of Mechanical Sciences, 144. pp. 518 - 525. ISSN: 0020-7403 Open Access Link
De Coster, R. and Phillips, S. (2018) 'Technology intelligence systems in industry and academic networks', inInformation and Technology Literacy Concepts Methodologies Tools and Applications. Hershey, PA, USA : IGI Global. , 1-4. pp. 28 - 46. ISBN 10: 1-5225-3418-0. ISBN 13: 978-1-5225-3417-4.