Cizek, P., McKay, BJ. and Lozano-Perez, S. (2004) 'Investigation of the interfaces between boride particles and aluminium in the as-received and re-melted Ti-B-Al grain refiner master alloy'.Institute-of-Physics-Electron-Microscopy and Analysis-Group Conference (EMAG 2003). Univ Oxford, Examinat Sch, Oxford, ENGLAND. 19 - 5 September. IOP PUBLISHING LTD. pp. 429 - 432. ISSN: 0951-3248

El Mubarek, HAW., Bonar, JM., Dilliway, GD., Ashburn, P., Karunaratne, M., Willoughby, AF., Wang, Y., Hemment, PLF., Price, R., Zhang, J. and Ward, P. et al. (2004) 'Effect of fluorine implantation dose on boron thermal diffusion in silicon'. Journal of Applied Physics, 96 (8). pp. 4114 - 4121. ISSN: 0021-8979

Giacomin, J. (2004) 'Apparent mass of small children: Experimental measurements'. Ergomomics, 47 (13). pp. 1454 - 1474. ISSN: 0014-0139 Open Access Link

Cardwell, DA., Murakami, M., Zeisberger, M., Gawalek, W., Gonzalez-Arrabal, R., Eisterer, M., Weber, HW., Fuchs, G., Krabbes, G., Leenders, A., Freyhardt, HC., Chaud, X., Tournier, R. and Hari Babu, N. et al. (2004) 'Round robin measurements of the flux trapping properties of melt processed Sm–Ba–Cu–O bulk superconductors'. Physica C: Superconductivity, 412-414 (SPEC. ISS.). pp. 623 - 632. ISSN: 0921-4534

Eskin, DG., Zuidema, J., Savran, VI. and Katgerman, L. (2004) 'Structure formation and macrosegregation under different process conditions during DC casting'. Materials Science and Engineering: A, 384 (1-2). pp. 232 - 244. ISSN: 0921-5093

Prescott, NB. and Bonser, RHC. (2004) 'Beak Trimming Reduces Feeding Efficiency of Hens'. Journal of Applied Poultry Research, 13 (3). pp. 468 - 471. ISSN: 1056-6171

Gan TH., Hutchins, DA. and Green, RJ. (2004) 'A swept frequency multiplication technique for air-coupled ultrasonic NDE'. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 51 (10). pp. 1271 - 1279. ISSN: 0885-3010

Fan, Z., Ji, S. and Liu, G. (2004) 'Development of the rheo-diecasting process for Mg-alloys'.International Conference on Magnesium - Science, Technology and Applications. Beijing, Peoples Republic of China. 20 - 24 September. Trans Tech Publications, Ltd.. pp. 405 - 411. ISSN: 0255-5476

Naber, R-R., Bahai, H. and Jones, BE. (Accepted) 'Numerical, Analytical and Experimental Investigation of Acoustic Emission Waves in an Isotropic Plate'.The Seventh International Conference on Computational Structures Technology. Civil-Comp Press. ISSN: 1759-3433

Stangeland, A., Mo, A. and Eskin, D. (2004) 'Constitutive equation for thermal strain in the mushy zone during solidification of aluminium alloys'.Solidification and Gravity. Miskolc. 6 - 9 September. TRANS TECH PUBLICATIONS LTD. pp. 343 - 348. ISSN: 0255-5476

Stangeland, A., MO, A., Nielsen, Ø., M’Hamdi, M. and Eskin, D. (2004) 'Development of thermal strain in the coherent mushy zone during solidification of aluminum alloys'. Metallurgical and Materials Transactions A, 35 (9). pp. 2903 - 2915. ISSN: 1073-5623

Ramirez-Jimenez, CR., Papadakis, N., Reynolds, N., Gan, TH., Purnell, P. and Pharaoh, M. (2004) 'Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event'. Composites Science and Technology, 64 (12). pp. 1819 - 1827. ISSN: 0266-3538

Collis (née Hedges), VJ., Green, LE., Blowey, RW., Packington, AJ. and Bonser, RHC. (2004) 'Testing White Line Strength in the Dairy Cow'. Journal of Dairy Science, 87 (9). pp. 2874 - 2880. ISSN: 0022-0302

Giacomin, J., Abdullah, S., Yates, JR. and Choi, JC. (2004) 'An experimental validation of the fatigue damaging events extracted using the wavelet bump extraction (WBE) algorithm'.12th International Conference on Experimental Mechanics (ICEM12). Politecnico di Bari, Italy. 29 - 2 September. European Association for Experimental Mechanics.Open Access Link

Frias-Martinez, E., Magoulas, G., Chen, S. and Macredie, R. (2004) 'Recent soft computing approaches to user modeling in adaptive hypermedia'.3rd International Conference on Adaptive Hypermedia and Adaptive Web-Based Systems. Eindhoven, Netherlands. 23 - 26 August. Springer Berlin Heidelberg. pp. 104 - 114. ISSN: 0302-9743

Bonser, RHC., Deaton, KE., Bishop, CM. and Butler, PJ. (2004) 'The effect of impaired thyroid function during development on the mechanical properties of avian bone'. Journal of Experimental Zoology Part A: Comparative Experimental Biology, 301A (8). pp. 636 - 641. ISSN: 1548-8969

Bate, PS., Huang, Y. and Humphreys, FJ. (2004) 'Development of the “brass” texture component during the hot deformation of Al–6Cu–0.4Zr'. Acta Materialia, 52 (14). pp. 4281 - 4289. ISSN: 1359-6454

Eskin, GI. and Eskin, DG. (2004) 'Some control mechanisms of spatial solidification in light alloys'. International Journal of Materials Research, 95 (8). pp. 682 - 690. ISSN: 1862-5282 Open Access Link

Smith, DR. (2004) 'Radiation Damage in Charge Coupled Devices'. PhD Thesis.

Huang, Y., Ridley, N. and Humphreys, FJ. (2004) 'Evolution of microstructure during the hot plane strain compression of an as-cast Al-Cu-Zr alloy'.Euro-SPF 04. Albi, France. 14 - 15 July.

Ma, X., Soh, AK. and Wang, B. (2004) 'A design database for moulded pulp packaging structure'. Packaging Technology and Science, 17 (4). pp. 193 - 204. ISSN: 0894-3214

Giacomin, J. and Woo, YJ. (2004) 'Beyond comfort: Information content and perception enhancement'. Engineering Integrity, 16 (1). pp. 8 - 16. ISSN: 1365-4101 Open Access Link

Ivanov, A., Dimov, S., Pham, DT. and Popov, K. (2004) 'Micromilling strategies: optimization issues'. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 218. pp. 731 - 736.

Jones, N., Harrison, D., Hussein, H., Billett, E. and Chiodo, J. (2004) 'Electrically self-powered active disassembly'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 (7). pp. 689 - 697. ISSN: 0954-4054

Purnell, P., Gan, TH., Hutchins, DA. and Berriman, J. (2004) 'Noncontact ultrasonic diagnostics in concrete: A preliminary investigation'. Cement and Concrete Research, 34 (7). pp. 1185 - 1188. ISSN: 0008-8846

Smit, MA., Hunter, JA., Sharman, JDB., Scamans, GM. and Sykes, JM. (2004) 'Effects of thermal and mechanical treatments on a titanium-based conversion coating for aluminium alloys'. Corrosion Science, 46 (7). pp. 1713 - 1727. ISSN: 0010-938X

Chang, ITH. and Ren, Z. (2004) 'Simple processing method and characterisation of nanosized metal powders'. Materials Science and Engineering: A, 375-377 (1-2 SPEC. ISS.). pp. 66 - 71. ISSN: 0921-5093

Liu, YJ. and Chang, ITH. (2004) 'Effects of oxide phases on thermomagnetisation of mechanically alloyed amorphous Fe–(Co, Ni)–Zr–B powder'. Materials Science and Engineering: A, 375-377 (1-2 SPEC. ISS.). pp. 1092 - 1096. ISSN: 0921-5093

Cantor, B., Chang, ITH., Knight, P. and Vincent, AJB. (2004) 'Microstructural development in equiatomic multicomponent alloys'. Materials Science and Engineering: A, 375-377 (1-2 SPEC. ISS.). pp. 213 - 218. ISSN: 0921-5093

Mikhailov, SE. and Namestnikova, IV. (2004) 'Local and non-local normalised equivalent strain functionals for cyclic fatigue'.7th International Conference on Biaxial/Multiaxial Fatigue and Fracture. Berlin, Germany. 28 - 1 July.Open Access Link

Gallear, D. and Ghobadian, A. (2004) 'An examination of current and future purchaser-supplier relationship characteristics: evidence from the UK'. Fontainebleau, France. 27 - 29 June. Proceedings of European Operations Management Association Annual Conference.

Smith, DR., Holland, AD., Hutchinson, I., Abbey, AF., Pool, P., Burt, D. and Morris, D. et al. (2004) 'Low noise charge injection in the CCD22'.Conference on High-Energy Detectors in Astronomy. Glasgow, Scotland. 22 - 23 June. SPIE. pp. 189 - 196. ISSN: 0277-786X Open Access Link

Ivanov, A., Pham, DT., Dimov, S. and Popov, K. (2004) 'Micro-EDM - recent developments and research issues'. Journal of Materials Processing Technology, 149 (1-3). pp. 50 - 57. ISSN: 0924-0136

Silver, J., Fern, GR., Withnall, R. and Lipman, AL. (2004) 'A novel synthetic process for producing small particle printable FED phosphors'.Photonics Focus. Centre Point, London. 2  [unpublished]

Li, Z., Zhou, X. and Shen, B. (2004) 'Fiber-cement extrudates with perlite subjected to high temperatures'. Journal of Materials in Civil Engineering ASCE, 16 (3). pp. 221 - 229. ISSN: 0899-1561

Fulong, Y., Yongfeng, G., Yingchun, L., Yongda, Y., Honggang, F., Kai, C. and Xichun, L. et al. (2004) 'Micro-fabrication of crystalline silicon by controlled alkali etching'. Elsevier BV. pp. 567 - 572. ISSN: 0924-0136

S. Morar, S. and D. Macredie, R. (2004) 'Special issue on ‘Interacting with desktop virtual environments: Perception and navigation’'. Virtual Reality, 7 (3-4). pp. 129 - 130. ISSN: 1359-4338

Morar, S. and Macredie, R. (2004) 'Usability issues of desktop virtual environment applications'. Virtual Reality, 7 (3-4). pp. 175 - 176. ISSN: 1359-4338

Giacomin, J., Shayaa, MS., Dormegnie, E. and Richard, L. (2004) 'Frequency weighting for the evaluation of steering wheel rotational vibration'. International Journal of Industrial Ergonomics, 33 (6). pp. 527 - 541. ISSN: 0169-8141 Open Access Link

Silver, J., Ireland, TG., Withnall, R., Fern, GR. and Sancho, D. (2004) 'Investigation of spherical particles of (Y2-(X+Y)Gdx)O3:Euy3+ (where x = 0.02 to 0.4, y = 0.04) and cubic Y2O3:Eu3+ for low voltage applications'.Royal Society of Chemistry. Burlington House. 18 [unpublished]

Fang, CM. and Wijs, GAD. (2004) 'Lattice vibrations and thermal properties of carbon nitride with defect ZnS structure from first-principles calculations'. Journal of Physics: Condensed Matter, 16 (18). pp. 3027 - 3034. ISSN: 0953-8984

Purnell, P., Hutchins, D., Berriman, J. and Gan, TH. (2004) 'Testing without touching: Advances in ultrasonic concrete interrogation'. Concrete London, 38 (5). pp. 10 - 11. ISSN: 0010-5317

Kazilas, MC. and Partridge, IK. (2004) 'Temperature modulated dielectric analysis (TMDA): a new experimental technique for the separation of temperature and reaction effects in dielectric cure monitoring signals'. Measurement Science and Technology, 15 (5). pp. L1 - L4. ISSN: 0957-0233

Fang, CM. and Metselaar, R. (2004) 'First-principles calculations of the stability and local structure of  -sialon ceramics on the line Si₃N₄–½Ca₃N₂:3AlN'. Journal of Physics: Condensed Matter, 16 (16). pp. 2931 - 2939. ISSN: 0953-8984

Eskin, DG., Katgerman, L., Suyitno. and Mooney, JF. (2004) 'Contraction of aluminum alloys during and after solidification'. Metallurgical and Materials Transactions A, 35 (4). pp. 1325 - 1335. ISSN: 1073-5623

Bonser, RHC., Saker, L. and Jeronimidis, G. (2004) 'Toughness anisotropy in feather keratin'. Journal of Materials Science, 39 (8). pp. 2895 - 2896. ISSN: 0022-2461

Gili, E., Kunz, VD., de Groot, CH., Uchino, T., Ashburn, P., Donaghy, DC., Hall, S., Wang, Y. and Hemment, PLF. et al. (2004) 'Single, double and surround gate vertical MOSFETs with reduced parasitic capacitance'. Solid-State Electronics, 48 (4). pp. 511 - 519. ISSN: 0038-1101

Ballin, D., Earnshaw, RE., Macredie, RD., Vince, JA. and Notarmarco, CS. (2004) 'Online First publication'. Virtual Reality, 7 (2). pp. 65 - 65. ISSN: 1359-4338

McKay, BJ. and Schumacher, P. (2004) 'An investigative study of si poisoning in al-si alloys using the metallic glass technique'.Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 157 - 166.

Suyitno., Eskin, D. and Katgerman, L. (2004) 'Effect of casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'.TMS Annual Meeting. Charlotte. 14 - 18 March. TMS. pp. 47 - 52.

Yoon, JW., Cardoso, RP., Wang, SP. and Choudry, S. (2004) 'A General Purpose One Point Quadrature Shell Element Based on Resultant-Stress'.NUMIFORM'04, 8th International Conference on Numerical Methods in Industrial Forming Processes.