Mohimi, A., Gan, TH., Balachandran, W., Selcuk, C. and Edwards, G. (2012) 'Guided wave transducers for inspection of high temperature superheated steam pipes'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 272 - 278.

Saiful, CG., Cheng, K., Sun, X. and Bateman, R. (2012) 'Optimizing heat transfer rate in an internally cooled cutting tool: FE-based design analysis and experimental study'. Key Engineering Materials, 496. pp. 188 - 193. ISSN: 1013-9826

Al-Helal, K., Stone, IC. and Fan, Z. (2012) 'Simultaneous Primary Si Refinement and Eutectic Modification in Hypereutectic Al-Si Alloys'. Transactions of the Indian Institute of Metals, 65 (6). pp. 1 - 5. ISSN: 0972-2815

Barrientos, MA. and Maischak, M. (2012) 'A-posteriori error analysis to the exterior Stokes problem'. Applied Numerical Mathematics, 63. pp. 25 - 44. ISSN: 0168-9274

Huang, Y., Zahid, GH. and Prangnell, PB. (2012) 'Loss of high angle boundary area during annealing a cryo-SPD processed Al-alloy with a nano-scale lamellar grain structure'. Materials Science Forum, 715-716. pp. 219 - 226. ISSN: 0255-5476

Huang, Y. and Prangnell, PB. (2012) 'Dynamic recovery during low temperature deformation in an Al-0.1Mg alloy'. TMS Annual Meeting. pp. 161 - 168.

Wu, T., Cheng, K. and Rakowski, R. (2012) 'Investigation on tooling geometrical effects of micro tools and the associated micro milling performance'. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 226 (9). pp. 1442 - 1453. ISSN: 0954-4054

Sapargaliyev, YA. and Kalganova, TG. (2012) 'Open-ended evolution to discover analogue circuits for beyond conventional applications'. Genetic Programming and Evolvable Machines, 13 (4). pp. 411 - 443. ISSN: 1389-2576 Open Access Link

Coughlan, J., Swift, S., Jamal, A. and Macredie, R. (2012) 'The effects of social networking on social capital and employability for computing and business students'.2nd Annual International Conference on Education & e-Learning (EeL 2012). Bali. [unpublished]

Zhang, L., Subroto, T., Katgerman, L., Eskin, DG. and Miroux, A. (2012) 'Influence of melt feeding scheme and casting parameters during direct-chill casting on microstructure of an AA7050 billet'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 43B (6). pp. 1565 - 1573. ISSN: 1073-5615 Open Access Link

Gao, S., Ding, H. and Cheng, K. (2012) 'An integrated approach to the design and analysis of an ultra-high speed air-bearing spindle'. Materials Science Forum, 723. pp. 227 - 232. ISSN: 0255-5476

Hu, Y., Yang, Q., Sun, X. and Wei, P. (2012) 'Applying semantic web services to enterprise web'. International Journal of Manufacturing Research, 7 (1). pp. 1 - 8. ISSN: 1750-0591

Xiao, C., Ding, H., Li, W. and Cheng, K. (2012) 'Design and analysis of a novel sensing cutting tool for precision turning'. Key Engineering Materials, 516. pp. 373 - 377. ISSN: 1013-9826

Gan, TH. and Edwards, G. (2012) 'Advancement of NDT technologies through the European FP7 research for the benefit of SMEs funding scheme'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 100 - 110.

Wu, T. and Cheng, K. (2012) '3D FE-based modelling and simulation of the micro milling process'. Key Engineering Materials, 516. pp. 634 - 639. ISSN: 1013-9826

Dowson, M., Grogan, M., Birks, T., Harrison, D. and Craig, S. (2012) 'Streamlined life cycle assessment of transparent silica aerogel made by supercritical drying'. Applied Energy, 97. pp. 396 - 404. ISSN: 0306-2619

De Coster, R., Bateman, RJ. and Plant, AVC. (2012) 'Supply chain implications of sustainable design strategies for electronics products'. International Journal of Advanced Logistics, 1 (1). pp. 1 - 20. ISSN: 2287-108X Open Access Link

MACREDIE, R. (2012) 'The Effects of Individual Differences and Visual Instructional Aids on Disorientation, Learning Performance and Attitudes in a Hypermedia Learning System'. Computers in Human Behaviour, 28 (6). pp. 2182 - 2198. ISSN: 0747-5632

Wang, H. and Yang, Q. (2012) 'Personalised customisation in product design using customer attributes and artificial neural network'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (8). pp. 1416 - 1420. ISSN: 0954-4054

Schenker, MC., Pourquié, MJBM., Eskin, DG. and Boersma, BJ. (2012) 'PIV quantification of the flow induced by an ultrasonic horn and numerical modeling of the flow and related processing times'. Ultrasonics Sonochemistry, 20 (1). pp. 502 - 509. ISSN: 1350-4177

Sermon, PA., Worsley, MP., Cheng, Y., Courtney, L., Shinar-Bush, V., Ruzimuradov, O., Hopwood, AJ., Edwards, MR., Gashi, B., Harrison, D. and Xu, Y. et al. (2012) 'Deterring gun crime materially using forensic coatings'. Forensic Science International, 221 (1-3). pp. 131 - 136. ISSN: 0379-0738

Bayandorian, I., Stone, I., Huang, Y. and Fan, Z. (2012) 'Twin roll casting of thin AZ31 magnesium alloy strip with uniform microstructure and chemistry'.Symposium on Magnesium Technology held during TMS Annual Meeting and Exhibition. Orlando, FL. 1 - 15 March. Springer International Publishing. pp. 135 - 140. ISSN: 1545-4150

Zuo, YB., Jiang, B., Zhang, Y. and Fan, Z. (2012) 'Melt conditioned DC (MC-DC) casting of magnesium alloys'. Magnesium Technology. pp. 155 - 160. ISSN: 1545-4150

Smith, DR. and Cole, J. (2012) 'Development and evaluation of an undergraduate multidisciplinary project activity in engineering and design'. American Journal of Engineering Education, 3 (1). pp. 41 - 52. ISSN: 2153-2516

Wang, Y., Li, HT. and Fan, Z. (2012) 'Oxidation of aluminium alloy melts and inoculation by oxide particles'. Transactions of the Indian Institute of Metals, 65 (6). pp. 653 - 661. ISSN: 0972-2815

Cashell, KA., Elghazouli, AY. and Izzuddin, BA. (2012) 'Ductility of Composite Floor Slabs under Idealised Fire Conditions'. Proceedings of the ICE - Structures and Buildings, 165 (7). pp. 399 - 409. ISSN: 0965-0911 Open Access Link

Thornicroft, K., Mares, C. and Mudge, P. (2012) 'Time-frequency analysis of long range ultrasonic signals'. Journal of Physics: Conference Series, 382 (1). pp. 012060 - 012060. ISSN: 1742-6588

Musuva, M. and Mares, C. (2012) 'Vibration analysis of frame structures using wavelet finite elements'. Journal of Physics: Conference Series, 382 (1). pp. 012020 - 012020. ISSN: 1742-6588

Qu, Z., Bennecer, A., Selcuk, C. and Gan, TH. (2012) 'Development of a laser-based weld flaw identification system'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 21 - 29.

Soua, S. and Gan, TH. (2012) 'Development of in-service Condition Monitoring system using combined vibrational and Acoustic Emission signature for wind turbine gearbox and generator shaft'. 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012. pp. 186 - 202.

Iovea, M., Neagu, M., Mateiasi, G., Halai, HV., Amos, M., Ponomarev, M., Kappatos, V., Selcuk, C., Gan, TH., Gierl, C. and Momeni, M. et al. (2012) 'Preliminary NDT investigation of sintered Powder Metallurgy parts by high-resolution TDI based X-ray digital radiography'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012.

Ponomarev, MG., Kappatos, V., Selcuk, C., Gan, TH., Amos, M., Halai, H., Gierl, C. and Lovea, M. et al. (2012) 'Development of a digital radiographic inspection technique for production friendly quality assessment of powder metallurgy parts'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012.

Li, H-T., Wang, Y. and Fan, Z. (2012) 'Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys'. Acta Materialia, 60 (4). pp. 1528 - 1537. ISSN: 1359-6454

Liu, Y., Wu, H-X. and Wang, B. (2012) 'Gradient design of metal hollow sphere (MHS) foams with density gradients'. Composites Part B: Engineering, 43 (3). pp. 1346 - 1352. ISSN: 1359-8368 Open Access Link

Baharin, R., Hobson, PR., Leslie, DE. and Smith, DR. (2012) 'Effect of gamma radiation on potential ionising radiation detectors and dosimeters based on quantum dots'. IEEE Nuclear Science Symposium Conference Record. pp. 3228 - 3231. ISSN: 1095-7863

Ponomarev, MG., Selcuk, C. and Gan, T-H. (2012) 'Construction of pattern recognition system optimized for X-ray inspection of plastic electronics and OLED displays'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 354 - 360.

Lam, B. (2012) 'Co-designing multicultural teaching and learning approach for design management programme'. Journal of Design Management, 3 (1). pp. 8 - 15.

Lam, B. (2012) 'Playing for everyone: Community-led design through digital games'. Design Management Review, 24 (1). pp. 20 - 27.

Fernando, TGI. and Kalganova, T. (2012) 'Multi-colony ant systems for multi-hose routing'. International Journal of Computer Applications, 59 (2). pp. 1 - 14.Open Access Link

Vezzoli, C., Ceschin, F., Diehl, JC. and Kohtala, C. (2012) 'Why have 'Sustainable Product-Service Systems' not been widely implemented? Meeting new design challenges to achieve societal sustainability'. Journal of Cleaner Production, 35. pp. 288 - 290. ISSN: 0959-6526

Sundaram, K., Babu, NH., Scamans, GM., Eskin, DG. and Fan, Z. (2012) 'Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content'. International Journal of Materials Research, 103 (10). pp. 1228 - 1234.

Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Rheo-extrusion of AZ91D'. Solid State Phenomena, 192-193. pp. 470 - 475.

Al-Helal, K., Stone, IC. and Fan, Z. (2012) 'Simultaneous primary Si refinement and eutectic modification in hypereutectic Al-Si alloys'. Transactions of the Indian Institute of Metals, 65 (6). pp. 663 - 667. ISSN: 0972-2815

Grzhibovskis, R., Mikhailov, SE. and Rjasanow, S. (2012) 'Numerics of Boundary-Domain Integral and Integro-Differential Equations for BVP with Variable Coefficient in 3D'. Computational Mechanics, 51 (4). pp. 495 - 503. ISSN: 1432-0924

Hou, J., Bonser, RHC. and Jeronimidis, G. (2012) 'Developing sensorized arm skin for an octopus inspired robot'.2012 IEEE International Conference on Robotics and Automation (ICRA). St Paul, MN. 1 - 18 May. IEEE. pp. 3840 - 3845. ISSN: 1050-4729

Gkatzidou, V., Balachandran, W., Lowndes, C., Howell-Jones, R., Aicken, CR., Mercer, CH., Sutcliffe, L., Sonnenberg, P., Jackson, M., Estcourt, CS., Sadiq, ST. and Hone, K. et al. (2012) 'A user centred approach to the design of point-of-care and self-test mobile phone diagnostics for sexually transmitted infections (STIs)'. [Poster]

Pichugin, A. and Rogerson, GA. (2012) 'Explicit example of non-unique extensional edge waves in a pre-stressed incompressible plate'.8th European Solid Mechanics Conference (ESMC-2012). Graz, Austria. [unpublished]

Fan, Z. (2012) 'An Epitaxial Model for Heterogeneous Nucleation on Potent Substrates'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. pp. 1 - 10. ISSN: 1073-5623

Mikhailov, SE. (2012) 'Solution regularity and co-normal derivatives for elliptic systems with non-smooth coefficients on Lipschitz domains'. Journal of Mathematical Analysis and Applications, 400 (1). pp. 48 - 67. ISSN: 0022-247X

Gläfke, M., Maischak, M. and Stephan, EP. (2012) 'Coupling of FEM and BEM for a transmission problem with nonlinear interface conditions. Hierarchical and residual error indicators'. Applied Numerical Mathematics, 62 (6). pp. 736 - 753. ISSN: 0168-9274