Skip to Content
IMM

IMM

Filter

Priyadarshi, A., Khavari, M., Subroto, T., Conte, M., Prentice, P., Pericleous, K., et al. (2021) 'On the governing fragmentation mechanism of primary intermetallics by induced cavitation'. Ultrasonics Sonochemistry, 70. pp. 1 - 16. ISSN: 1350-4177 Open Access Link

Journal article

Behrman, K., Fouilloux, J., Ireland, T., Fern, GR., Silver, J. and Kymissis, I. (2021) 'Early defect identification for micro light-emitting diode displays via photoluminescent and cathodoluminescent imaging'. Journal of the Society for Information Display, 29 (4). pp. 264 - 274. ISSN: 1071-0922 Open Access Link

Journal article

Danishvar, M., Danishvar, S., Souza, F., Sousa, P. and Mousavi, A. (2021) 'Coarse Return Prediction in a Cement Industry’s Closed Grinding Circuit System through a Fully Connected Deep Neural Network (FCDNN) Model'. Applied Sciences, 11 (4). pp. 1 - 15.Open Access Link

Journal article

Gan, TH., Kanfoud, J., Nedunuri, H., Amini, A. and Feng, G. (2021) 'Industry 4.0: Why Machine Learning Matters?'.2nd World Congress on Condition Monitoring (WCCM 2019). Singapore. 3 - 5 December. Springer Singapore. pp. 397 - 404. ISSN: 2195-4356 Open Access Link

Conference paper

Balezdrova, N., Choi, Y. and Lam, B. (2021) 'Relational identities: how service co-design can help improve the minority experience and becoming ourselves'.ServDes.2020: Tensions / Paradoxes / Plurality. RMIT University, Melbourne Australia. 2 - 5 February. ISSN: 1650-3686 Open Access Link

Conference paper

Lacagnina, G., Chaitanya, P., Kim, J-H., Berk, T., Joseph, P., Choi, K-S., et al. (2021) 'Leading edge serrations for the reduction of aerofoil self-noise at low angle of attack, pre-stall and post-stall conditions'. International Journal of Aeroacoustics, 20 (1-2). pp. 130 - 156. ISSN: 1475-472X Open Access Link

Journal article

Housden, J., Wang, S., Bao, X., Zheng, J., Skelton, E., Noh, Y., et al. (2021) 'Towards Standardized Acquisition with a Dual-probe Ultrasound Robot for Fetal Imaging'. IEEE Robotics and Automation Letters, 6 (2). pp. 1059 - 1065. ISSN: 2377-3766 Open Access Link

Journal article

Cashell, K. (2021) 'Editorial'. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 174 (2). pp. 79 - 79. ISSN: 0965-0911

Journal article

Sberna, P., Fang, PX., Fang, C. and Nihtianov, S. (2021) 'Mechanism of Electronegativity Heterojunction of Nanometer Amorphous-Boron on Crystalline Silicon: An Overview'. Crystals, 11 (2). pp. 1 - 16. ISSN: 2073-4352 Open Access Link

Journal article

Masoudi, B., Danishvar, S. and Razavi, SN. (2021) 'A multi-modal fusion of features method based on deep belief networks to diagnosis schizophrenia disease'. International Journal of Wavelets, Multiresolution and Information Processing, 19 (3). pp. 1 - 16. ISSN: 0219-6913

Journal article

Fang, C., Yasmin, S. and Fan, Z. (2021) 'Interfacial interaction and prenucleation at liquid-Al/γ-Al2O3{1 1 1} interfaces'. Journal of Physics Communications, 5 (1). pp. 1 - 10. ISSN: 2399-6528 Open Access Link

Journal article

Geng, H., Wang, Z., Yi, X., Alsaadi, FE. and Cheng, Y. (2021) 'Tobit Kalman filtering for fractional-order systems with stochastic nonlinearities under Round-Robin protocol'. International Journal of Robust and Nonlinear Control, 31 (6). pp. 2348 - 2370. ISSN: 1049-8923 Open Access Link

Journal article

Fang, CM., Parker, SC. and de With, G. (Accepted) 'Atomistic Simulation of the Surface Energy and Structure of the Clean and Hydrated Surfaces of Spinel MgAl2O4'. Key Engineering Materials, 206-213. pp. 543 - 546.

Journal article

He, Q., Ghobadian, A. and Gallear, D. (2021) 'Inter-Firm Knowledge Transfer between Strategic Alliance Partners: A Way Forward'. European Management Review, 18 (3). pp. 229 - 248. ISSN: 1740-4754 Open Access Link

Journal article

Subroto, T., Eskin, DG., Miroux, A., Ellingsen, K., M'Hamdi, M. and Katgerman, L. (2021) 'Semi-solid constitutive parameters and failure behavior of a cast AA7050 alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (2). pp. 871 - 888. ISSN: 1073-5623 Open Access Link

Journal article

Cashell, KA., Malaska, M., Khan, M., Alanen, M. and Mela, K. (2021) 'Experimental and numerical analysis of stainless steel cellular beams in fire'. Fire Safety Journal, 121 (May 2021). pp. 1 - 13. ISSN: 0379-7112 Open Access Link

Journal article

Zou, L., Wang, Z., Geng, H. and Liu, X. (2021) 'Set-Membership Filtering Subject to Impulsive Measurement Outliers: A Recursive Algorithm'. IEEE/CAA Journal of Automatica Sinica, 8 (2). pp. 377 - 388. ISSN: 2329-9266 Open Access Link

Journal article

Loh, GH., Sotayo, A. and Pei, E. (2021) 'Development and testing of material extrusion additive manufactured polymer–textile composites'. Fashion and Textiles, 8 (1). pp. 1 - 21. ISSN: 2198-0802 Open Access Link

Journal article

Li, M., Wang, Z., Li, K., Liao, X., Hone, K. and Liu, X. (2021) 'Task Allocation on Layered Multiagent Systems: When Evolutionary Many-Objective Optimization Meets Deep Q-Learning'. IEEE Transactions on Evolutionary Computation, 25 (5). pp. 842 - 855. ISSN: 1089-778X Open Access Link

Journal article

Mikhailov, S. and Portillo, CF. (2021) 'Boundary-domain integral equations equivalent to an exterior mixed BVP for the variable-viscosity compressible Stokes PDEs'. Communications on Pure and Applied Analysis, 20 (3). pp. 1103 - 1133. ISSN: 1534-0392 Open Access Link

Journal article

Onwukwe, U. and Anguilano, L. (2021) 'Advanced Characterizations of Oxides for Optoelectronic Applications', in Ray, A. (ed.) Oxide Electronics. Wiley. pp. 453 - 495. ISBN 13: 9781119529477.

Book chapter

Zamenopoulos, T., Lam, B., Alexiou, K., Kelemen, M., De Sousa, S., Moffat, S. and et al. (2021) 'Types, obstacles and sources of empowerment in co-design: the role of shared material objects and processes'. Codesign, 17 (2). pp. 139 - 158. ISSN: 1571-0882

Journal article

Vezzoli, C., Parra, BG., Kohtala, C., Ceschin, F., Dos Santos, A., Castillo, L., et al. (2021) 'Foreword'.

Book

Geng, H., Wang, Z., Zou, L., Mousavi, A. and Cheng, Y. (2020) 'Protocol-Based Tobit Kalman Filter under Integral Measurements and Probabilistic Sensor Failures'. IEEE Transactions on Signal Processing, 69. pp. 546 - 559. ISSN: 1053-587X Open Access Link

Journal article

Osman, D., Du, X., Li, W. and Noh, Y. (2020) 'An Optical Joint Angle Measurement Sensor based on an Optoelectronic Sensor for Robotic Manipulators'.The 8th International Conference on Control, Mechatronics and Automation. Moscow, Russia. 29 - 8 November. IEEE. pp. 28 - 32.Open Access Link

Conference paper

Rossi, E., Di Nicolantonio, M., Ceschin, F., Mincolelli, G., dos Santos, A., Kohtala, C., et al. (2020) 'Design Contributions for the COVID-19 Global Emergency (Part 1): Empirical Approaches and First Solutions'. Strategic Design Research Journal, 13 (3). pp. 294 - 311. ISSN: 1984-2988 Open Access Link

Journal article

Amini, A. (2020) 'On the Possibility of Using Virtual Reality to Improve the Mobility of People with Parkinson's Disease', in Hayre, CM., Muller, DJ. and Scherer, MJ. (eds.) Virtual Reality in Health and Rehabilitation. Boca Raton : CRC Press. ISBN 10: 0-429-35136-4. ISBN 13: 978-0-367-36771-8.

Book chapter

Zhang, M. and Chong, TP. (2020) 'Experimental investigation of the impact of porous parameters on trailing-edge noise'. Journal of Sound and Vibration, 489. pp. 1 - 35. ISSN: 0022-460X Open Access Link

Journal article

Que, Z. and Mendis, C. (2020) 'Effects of native AlN particles on heterogeneous nucleation in an Al-3Fe Alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (2). pp. 553 - 559. ISSN: 1073-5623 Open Access Link

Journal article

Al-Helal, K., Patel, J., Scamans, G. and Fan, Z. (2020) 'Direct Chill Casting and Extrusion of AA6111 Aluminum Alloy Formulated from Taint Tabor Scrap'. Materials, 13 (24). pp. 1 - 11. ISSN: 1996-1944 Open Access Link

Journal article

Peng, GS., Gu, YC., Song, GS., Wang, Y. and Chen, SY. (2020) 'New insight of Ca element refining grain structure in commercial purity Mg based on the first-principle calculation'. International Journal of Cast Metals Research, 34 (1). pp. 6 - 13. ISSN: 1364-0461

Journal article

Geng, H., Wang, Z., Alsaadi, FE., Alharbi, KH. and Cheng, Y. (2020) 'Federated Tobit Kalman Filtering Fusion with Dead-Zone-Like Censoring and Dynamical Bias under the Round-Robin Protocol'. IEEE Transactions on Signal and Information Processing over Networks, 7. pp. 1 - 16. ISSN: 2373-776X Open Access Link

Journal article

Gopal, R., Chinnapan, MM., Bojarajan, AK., Rotte, NK., Ponraj, JS., Ganesan, R., et al. (2020) 'Facile synthesis and defect optimization of 2D-layered MoS2 on TiO2 heterostructure for industrial effluent, wastewater treatments'. Scientific Reports, 10 (1). pp. 1 - 15. ISSN: 2045-2322 Open Access Link

Journal article

Li, P., Cheng, K. and Jiang, P. (2020) 'Investigation on quantitative analysis of carbon footprint in discrete manufacturing by using the innovative energy dataspace approach'. Manufacturing Letters, 27. pp. 58 - 62. ISSN: 2213-8463

Journal article

Li, G., Xia, R., Huang, Z., Wen, L. and Wang, H. (2020) 'Clustering SIFT: An Efficient Way to Achieve Flipping Invariance'.2020 15th IEEE International Conference on Signal Processing (ICSP). Beijing, China (virtual). 6 - 9 December. IEEE. pp. 150 - 155. ISSN: 2164-5221

Conference paper

Li, G., Wen, L., Huang, Z., Xia, R. and Wang, H. (2020) 'Rectangle Template Matching Based on Gradient-Chromatic Illumination-Invariant Images'.2020 15th IEEE International Conference on Signal Processing (ICSP). Beijing, China. 6 - 9 December. IEEE. pp. 170 - 175. ISSN: 2164-5221

Conference paper

Rong, H., Dong, W., Zhao, X. and Zhou, X. (2020) 'Investigation on multi-cracks initiation and propagation of fiber reinforced concrete in restrained shrinkage ring tests'. Theoretical and Applied Fracture Mechanics, 111 (February 2021). pp. 102856 - 102856. ISSN: 0167-8442

Journal article

Lim, Y., Giacomin, J. and Nickpour, F. (2020) 'What Is Psychosocially Inclusive Design? A Definition with Constructs'. Design Journal, 24 (1). pp. 5 - 28. ISSN: 1460-6925 Open Access Link

Journal article

Moghaddari, M., Lighvan, MZ. and Danishvar, S. (2020) 'Diagnose ADHD disorder in children using convolutional neural network based on continuous mental task EEG'. Computer Methods and Programs in Biomedicine, 197. pp. 105738 - 105738. ISSN: 0169-2607

Journal article

Dou, K., Lordan, E., Zhang, YJ., Jacot, A. and Fan, ZY. (2020) 'A complete computer aided engineering (CAE) modelling and optimization of high pressure die casting (HPDC) process'. Journal of Manufacturing Processes, 60. pp. 435 - 446. ISSN: 1526-6125

Journal article

Buzolin, RH., Guimaraes, LHM., Díaz, JAÁ., Silva, EPD., Tolnai, D., Mendis, CL., et al. (2020) 'Restoration mechanisms at moderate temperatures for As-Cast ZK40 magnesium alloys modified with individual Ca and Gd additions'. Crystals, 10 (12). pp. 1 - 22. ISSN: 2073-4352

Journal article

Pei, E. (2020) 'Editorial PIAM October 2020'. Progress in Additive Manufacturing, 5 (4). pp. 315 - 315. ISSN: 2363-9512

Journal article

Dzalbs, I. and Kalganova, T. (2020) 'Simple generate-evaluate strategy for tight-budget parameter tuning problems'.2020 IEEE Symposium Series on Computational Intelligence (SSCI). IEEE. pp. 783 - 790.

Conference paper

Al-Helal, K., Patel, JB. and Fan, Z. (2020) 'Fe-Rich Intermetallic Formation and Mechanical Properties of Recycled AA6111 Alloy Strips Produced by Melt Conditioning Twin Roll Casting'. JOM, 72 (11). pp. 3753 - 3759. ISSN: 1047-4838 Open Access Link

Journal article

Barekar, N., Barbatti, C., Skalicky, I., Fan, Z. and Jarrett, M. (2020) 'Enhancement of chip breakability of aluminium alloys by controlling the solidification during direct chill casting'. Journal of Alloys and Compounds, 862. pp. 1 - 8. ISSN: 0925-8388 Open Access Link

Journal article

Fan, Z. and Men, H. (2020) 'A molecular dynamics study of heterogeneous nucleation in generic liquid/substrate systems with positive lattice misfit'. Materials Research Express, 7 (12). pp. 126501 - 126501.Open Access Link

Journal article

Liu, J., Cheng, K., Ding, H. and Chen, S. (2020) 'An investigation of influence of cutting parameters on three-dimensional surface topography in micromilling SiCp/Al composites'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235 (5). pp. 829 - 838. ISSN: 0954-4054

Journal article

Que, Z., Zhou, Y., Wang, Y., Mendis, CL. and Fan, Z. (2020) 'Effects of Mg addition on the Al6(Fe,Mn) intermetallic compounds and the grain refinement of α-Al in Al-Fe-Mn alloys'. Materials Characterization, 171. pp. 1 - 8. ISSN: 1044-5803 Open Access Link

Journal article

Chkadua, O., Mikhailov, S. and Natroshvili, D. (2020) 'Localized boundary-domain singular integral equations of the Robin type problem for self-adjoint second-order strongly elliptic PDE systems'. Georgian Mathematical Journal, 0 (in press). pp. 1 - 21. ISSN: 1072-947X Open Access Link

Journal article