Emili, S., Ceschin, F. and Harrison, D. (2016) 'Product-Service System applied to Distributed Renewable Energy. A classification system, 15 archetypal models and a strategic design tool'. Energy for Sustainable Development: the journal of the international energy initiative, 32. pp. 71 - 98. ISSN: 0973-0826 Open Access Link

Bolzoni, L., Nowak, M. and Nadendla, H. (2016) 'Nb-based heterogeneous nuclei for enhanced α-Mg nucleation in Mg(-Al) alloys'. Materials Letters, 169. pp. 207 - 209. ISSN: 1873-4979 Open Access Link

Gardner, L., Bu, Y., Francis, P., Baddoo, NR., Cashell, KA. and McCann, F. (2016) 'Elevated temperature material properties of stainless steel reinforcing bar'. Construction and Building Materials, 114. pp. 977 - 997. ISSN: 0950-0618 Open Access Link

Kastiukas, G., Zhou, X. and Castro Gomes, J. (2016) 'Effects of Activator Synthesis Conditions on Alkali-activated Binders from Tungsten Mining Waste'.Young Researchers’ Forum III on Innovation in Construction Materials. London, United Kingdom. 12 - 12 April.

Atherton, M. (2016) 'A front-end lumped-parameter approach to planning physical Robust Engineering Design experiments on manufactured dynamic devices'.4th International Conference on the Interface between Statistics and Engineering. Palermo, Italy.Open Access Link

Jiao, F., Sayad Saravi, S. and Cheng, K. (2016) 'Investigation on an integrated approach to design and micro fly-cutting of micro-structured riblet surfaces'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231 (18). pp. 3291 - 3300. ISSN: 0954-4062

Zhou, L., Lu, KJ. and Liu, W. (2016) 'An Approach for Community Detection in Social Networks Based on Cooperative Games Theory'. Expert Systems: the journal of knowledge engineering, Vol. 33, (No. 2). pp. 176 - 188. ISSN: 1468-0394

Qiao, F., Cheng, K., Wang, L. and Guo, L. (2016) 'An experimental investigation on the dissimilar joining of AA6061 and 1Cr18Ni9Ti by refill friction stir spot welding and its mechanical properties'. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 230 (4). pp. 779 - 785. ISSN: 0954-4054

Maier, P., Peters, R., Mendis, CL., Müller, S. and Hort, N. (2016) 'Influence of Precipitation Hardening in Mg-Y-Nd on Mechanical and Corrosion Properties'. JOM, 68 (4). pp. 1183 - 1190. ISSN: 1047-4838

Huang, Y. (2016) 'Solute effect on grain boundary migration in ultrafine/nanostructured materials'.International conference and exhibition on materials chemistry. Valencia, Spain. 31 - 1 April.

Fan, Z. and Lu, SZ. (2016) 'A simple model for spherical growth in alloy solidification'. IOP Publishing. pp. 012016 - 012016. ISSN: 1757-8981

Hone, KS. and El Said, GR. (2016) 'Exploring the factors affecting MOOC retention: a survey study'. Computers & Education, 98. pp. 157 - 168. ISSN: 0360-1315 Open Access Link

Salski, B., Gwarek, W., Kopyt, P., Theodorakeas, P., Hatziioannidis, I., Koui, M., Chong, AYB., Tan, SM., Kappatos, V., Selcuk, C. and Gan, TH. et al. (2016) 'Portable Automated Radio-Frequency Scanner for Non-destructive Testing of Carbon-Fibre-Reinforced Polymer Composites'. Journal of Nondestructive Evaluation, 35 (2). ISSN: 0195-9298 Open Access Link

(2016) 'Unidirectional Carbon Fibre Anchorage Length Effect on Flexural Strength Capacity For Concrete Beams'.2nd International Conference on Architecture, Structure and Civil Engineering. Universal Researchers.

Wang, Q., Callisti, M., Greer, J., McKay, B., Milickovic, TK., Zoikis-Karathanasis, A., Deligkiozi, I. and Polcar, T. et al. (2016) 'Effect of annealing temperature on microstructure, mechanical and tribological properties of nano-SiC reinforced Ni-P coatings'. WEAR, 356-357. pp. 86 - 93. ISSN: 0043-1648

Noh, Y., Sareh, S., Wurdemann, H., Liu, H., Back, J., Housden, J., Rhode, K. and Althoefer, K. et al. (2016) 'Three-Axis Fiber-Optic Body Force Sensor for Flexible Manipulators'. IEEE Sensors Journal, 16 (6). pp. 1641 - 1651. ISSN: 1530-437X

He, Q., Ghobadian, A., Gallear, D., Beh, LS. and O Regan, N. (2016) 'Towards conceptualizing reverse service supply chains'. Supply Chain Management, 21 (2). pp. 166 - 179. ISSN: 1359-8546 Open Access Link

Beh, LS., Ghobadian, A., He, Q., Gallear, D. and O Regan, N. (2016) 'Second-life retailing: a reverse supply chain perspective'. Supply Chain Management, 21 (2). pp. 259 - 272. ISSN: 1359-8546 Open Access Link

Shaouf, A. and Lu, KJ. (2016) 'The Effect of Web Advertising Visual Design on Online Purchase Intention: An Examination across Gender'. Computers in Human Behavior, 60. pp. 622 - 634. ISSN: 0747-5632 Open Access Link

Yu, Z., Huang, Y., Gan, W., Mendis, CL., Zhong, Z., Brokmeier, HG., Hort, N. and Meng, J. et al. (2016) 'Microstructure evolution of Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr (wt%) alloy during deformation and its effect on strengthening'. Materials Science and Engineering A, 657. pp. 259 - 268. ISSN: 0921-5093 Open Access Link

Wang, EQ., Wang, G., Dargusch, MS., Qian, M., Eskin, DG. and StJohn, DH. (2016) 'Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment'. IOP Conference Series: Materials Science and Engineering, 117 (1). pp. 012050 - 012050. ISSN: 1757-8981 Open Access Link

Leese, R. and Ivanov, A. (2016) 'Comparison of polarisation curves and chronoamperometry experiments of titanium with and without ultrasonic vibrations of the electrolyte'. Advances in Mechanical Engineering, 8 (3). ISSN: 1687-8140 Open Access Link

Ivanov, A., Leese, R. and Spieser, A. (Accepted) 'Micro-electrochemical Machining', in Qin, Y. (ed.) Micromanufacturing Engineering and Technology. Elsevier. pp. 121 - 145. ISBN 13: 978-0-323-31149-6.

Chacon, JLF., Andicoberry, EA., Kappatos, V., Papaelias, M., Selcuk, C. and Gan, T-H. (2016) 'An experimental study on the applicability of acoustic emission for wind turbine gearbox health diagnosis'. JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL, 35 (1). pp. 64 - 76. ISSN: 0263-0923 Open Access Link

Tang, Q., Wang, X. and Yang, Q. (2016) 'Static pointing error analysis of electro-optical detection systems'. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 230 (3). pp. 593 - 600. ISSN: 0954-4054

Haghayeghi, R., Ezzatneshan, E. and Bahai, H. (2016) 'Retraction Note to: Grain refinement of AA5754 aluminum alloy by ultrasonic cavitation: Experimental study and numerical simulation (Met. Mater. Int., 2015, 21-1, 109-117, 10.1007/s12540-014-6015-5)'. Metals and Materials International, 22 (2). pp. 347. ISSN: 1598-9623

Achiamah-Ampomah, N. and Cheng, K. (2016) 'Investigation on Multi-Physics Simulation-Based Virtual Machining System for Vibratory Finishing of Integrally Bladed Rotors (IBRS)'. Journal of Multiscale Modelling, 07 (01). pp. 1640003 - 1640003. ISSN: 1756-9737

Ji, S., Gao, F. and Fan, Z. (2016) 'Thermodynamics Calculation of Extra Mn Addition in the Recycling of Al-Si-Cu Aluminium Alloys'.ICAA 15. ChongQing, China. 29 - 16 June. Trans Tech Publications, Ltd.. pp. 33 - 38. ISSN: 0255-5476 Open Access Link

Khan, M., Huang, Z., Li, M., Taylor, GA. and Khan, M. (2016) 'Optimizing hadoop parameter settings with gene expression programming guided PSO'. Concurrency Computation: Practice and Experience, 29 (3). ISSN: 1532-0626 Open Access Link

Durá-Gil, JV., Ballester-Fernández, A., Cavallaro, M., Chiodi, A., Ballarino, A., Brondi, C., von Arnim, V. and Stellmach, D. et al. (2016) 'New technologies for customizing products for people with special necessities: project FASHION-ABLE'. International Journal of Computer Integrated Manufacturing, 30 (7). pp. 724 - 737. ISSN: 0951-192X

Niu, Z. and Cheng, K. (2016) 'Multiscale Multiphysics-Based Modeling and Analysis on the Tool Wear in Micro Drilling'. Journal of Multiscale Modelling, 07 (01). pp. 1 - 22. ISSN: 1756-9737

Kastiukas, G., Zhou, X. and Castro Gomes, J. (2016) 'Development and Optimisation of Phase Change Material-Impregnated Lightweight Aggregates for Geopolymer Composites Made from Aluminosilicate Rich Mud and Milled Glass Powder'. Construction and Building Materials, 110. pp. 201 - 210. ISSN: 0950-0618 Open Access Link

Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2016) 'A High-order acoustic cavitation model for the treatment of a moving liquid metal volume'.CFD Modeling and Simulation in Materials Processing. Nasville, USA. 14 - 18 February. Wiley. pp. 135 - 142.

Tzanakis, I., Lebon, GSB., Eskin, DG. and Pericleous, K. (2016) 'Optimization of the ultrasonic processing in a melt flow'.Cast Shop Technology for Aluminum Production at TMS Annual Meeting. Nasville, USA. 14 - 18 February. Wiley. pp. 833 - 836. ISSN: 0147-0809 Open Access Link

Schmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, CL., Tolnai, D., Kainer, KU. and Hort, N. et al. (2016) 'Thermodynamic description of reactions between Mg and CaO'.TMS annual meeting 2016. Orlando Florida USA. 14 - 18 February. Wiley. pp. 67 - 72. ISSN: 1545-4150 Open Access Link

den Engelsen, D., Ireland, TG., Dhillon, R., Fern, G., Harris, PG. and Silver, J. (2016) 'Red Shift of CT-Band in Cubic Y2O3:Eu3+ upon Increasing the Eu3+ Concentration'. ECS Journal of Solid State Science and Technology,, 5 (5). pp. R59 - R66. ISSN: 2162-8769 Open Access Link

Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2016) 'A High‐Order Acoustic Cavitation Model for the Treatment of A Moving Liquid Metal Volume', in Wiley. pp. 133 - 142. ISBN 13: 9781119225768.

Ji, S., Yang, F. and Fan, Z. (2016) 'A high strength aluminium alloy for high pressure die casting'.TMS 2016. Nashville, Tennessee. 10 - 18 February. TMS USA. pp. 207 - 210. ISSN: 0147-0809 Open Access Link

Akbarpour, T., Shamsi, M. and Daneshvar, S. (2016) 'Medical image fusion using discrete wavelet transform and lifting scheme'.2015 22nd Iranian Conference on Biomedical Engineering (ICBME). Tehran, IRAN. 9 - 27 November. IEEE. pp. 293 - 298.

Wang, Y., Zhou, L. and Fan, Z. (2016) 'Mechanism of Zirconium Poisoning Effect on TiB2 Inoculation in Aluminium Alloys', in Williams, E. (ed.) Light Metals 2016. Wiley. pp. 725 - 729. ISBN 13: 9781119225799.

Al-Helal, K., Stone, I. and Fan, Z. (2016) 'Refinement of Primary Silicon Crystals by Novel Al-ZnS Master Alloy in Solidification of Hypereutectic Al-Si Alloys', in Williams, E. (ed.) Light Metals 2016. Wiley. pp. 271 - 273. ISBN 13: 9781119274780. Open Access Link

Warby, MK. and Whiteman, JR. (2016) 'Modelling of thermoforming processes for bio-degradable thermoplastic materials', in Aston, PJ., Mulholland, AJ. and Tant, KMM. (eds.) UK Success Stories in Industrial Mathematics. Cham, Switzerland : Springer. pp. 205 - 210. ISBN 10: 3319254529. ISBN 13: 9783319254524. Open Access Link

Kalganova, T., Zaitseva, E. and Roszak, T. (2016) 'Technique to Realise Multiple-Valued Functions on the PLA.'. Zakopane, Poland. Proc. of the International Workshop on Design Methodologies for Signal Processing. pp. 73 - 80.

Nadendla, H. and Joshi, U. (Accepted) 'Grain refiner for Magnesium alloys'.

McKay, BJ., Schumacher, P., Eck, S. and Ludwig, A. (Accepted) 'International Journal of Cast Metals Research'. Maney Publishing.

McKay, BJ., Cizek, P. and Schumacher, P. (Accepted) 'Nucleation mechanisms of TiBAl additions in Al-Ni-Si alloys', in Tms. pp. 833 - 838.

Cizek, P., McKay, BJ. and Schumacher, P. (Accepted) 'Study of Heterogeneous Nucleation of α-Al on Grain Refiner Particles in during Rapid Solidification', in Wiley-VCH Verlag GmbH. pp. 251 - 256.

Tzanakis, I., Lebon, GSB., Eskin, D. and Pericleous, K. (2016) 'Investigation of the factors influencing cavitation intensity during the ultrasonic treatment of molten aluminium'. MATERIALS & DESIGN, 90. pp. 979 - 983. ISSN: 0261-3069 Open Access Link

Eskin, D., Wang, F., Connolley, T. and Mi, J. (2016) 'Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al-0.4Ti alloy'. Journal of Crystal Growth, 435. pp. 24 - 30. ISSN: 1873-5002 Open Access Link

Mirihanage, W., Xu, W., Tamayo-Ariztondo, J., Eskin, D., Garcia-Fernandez, M., Srirangam, P. and Lee, P. et al. (2016) 'Synchrotron radiographic studies of ultrasonic melt processing of metal matrix nano composites'. Materials Letters, 164. pp. 484 - 487. ISSN: 0167-577X Open Access Link

Burugapalli, K., Razavi, M., Zhou, L. and Huang, Y. (2016) 'In Vitro Cytocompatibility Study of a Medical beta -Type Ti-35.5Nb-5.7Ta Titanium Alloy'. Journal of Biomaterials and Tissue Engineering, 6 (2). pp. 141 - 148. ISSN: 2157-9091 Open Access Link