Hari Babu, N., Kambara, M., Smith, PJ., Cardwell, DA. and Shi, Y. (2000) 'Fabrication of Large Single-grain Y–Ba–Cu–O Through Infiltration and Seeded Growth Processing'. Journal of Materials Research, 15 (6). pp. 1235 - 1238. ISSN: 0884-2914

Edney, RC., Atheron, MA., Comincini, S. and Cattini, A. (2000) 'Using correlation chains to link customer requirements and physical laws'.Engineering Design Conference. Brunel University. Brunel University. pp. 291 - 300.

Bonser, RHC. (2000) 'The Young's modulus of ostrich claw keratin'. Journal of Materials Science Letters, 19 (12). pp. 1039 - 1040. ISSN: 0261-8028

Zhang, J., Fan, Z., Wang, Y. and Zhou, B. (2000) 'Hypereutectic aluminium alloy tubes with graded distribution of Mg2Si particles prepared by centrifugal casting'. Materials & Design, 21 (3). pp. 149 - 153. ISSN: 0261-3069

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'The annealing behaviour of deformed cube-oriented aluminium single crystals'. Acta Materialia, 48 (10). pp. 2543 - 2556. ISSN: 1359-6454

Zhou, X., Li, G. and Ding, X. (2000) 'Models of Reinforced Concrete Shear Walls for Nonlinear Dynamic Analysis'. World Earthquake Engineering, 16 (2). pp. 13 - 18. ISSN: 1007-6069

Alfano, G., Rosati, L. and Valoroso, N. (2000) 'A numerical strategy for finite element analysis of no-tension materials'. International Journal for Numerical Methods in Engineering, 48 (3). pp. 317 - 350. ISSN: 1097-0207 Open Access Link

Qiu, H., Li, Y-B., Cheng, K., Li, Y. and Wang, J. (2000) 'A Study on an Evaluation Method for Form Deviations of 2D Contours from Coordinate Measurement'. The International Journal of Advanced Manufacturing Technology, 16 (6). pp. 413 - 423. ISSN: 0268-3768

Cardoso, RP., Gracio, JJ., Barlat, F. and Yoon, JW. (2000) 'Finite Element Analysis of Shear Test in Aluminium Alloys'.IV International Conference on Forging Processes - XX SENAFOR.

Yoon, JW., Chung, K., Cardoso, RP. and Gracio, JJ. (2000) 'Blank Design for Sheet Metal Product Based on Direct Design Method'.IV International Conference on Forging Processes - XX SENAFOR.

Ramsey, B. and Harrison, D. (2000) 'Development of paper membrane switches for fully featured computer keyboards'.IEEE International Symposium on Electronics and the Environment. San Francisco, CA, USA. 8 - 10 May. IEEE. pp. 27 - 32.Open Access Link

Chiodo, JD., McLaren, J., Billett, EH. and Harrison, DJ. (2000) 'Isolating LCD's at end-of-life using active disassembly technology: a feasibility study'.8th Annual IEEE International Symposium on Electronics and the Environment (ISEE 2000). San Francisco, CA. 8 - 10 May. IEEE. pp. 318 - 323. ISSN: 1095-2020 Open Access Link

Frey, SD., Harrison, DJ. and Billett, EH. (2000) 'Integrated product policy and ecological footprint of electronic products'.8th Annual IEEE International Symposium on Electronics and the Environment (ISEE 2000). San Francisco, CA. 8 - 10 May. IEEE. pp. 130 - 135. ISSN: 1095-2020 Open Access Link

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Microstructural evolution of the in situ Al-15wt.%Mg2Si composite with extra Si contents'. Scripta Materialia, 42 (11). pp. 1101 - 1106. ISSN: 1359-6462

Babu, NH., Lo, W., Cardwell, DA. and Shi, YH. (2000) 'Fabrication and microstructure of large grain Nd-Ba-Cu-O'. Superconductor Science and Technology, 13 (5). pp. 468 - 472. ISSN: 0953-2048

Mikhailov, SE. and Namestnikova, IV. (2000) 'Stress–singularity analysis in space junctions of thin plates'. Journal of Engineering Mathematics, 37 (4). pp. 327 - 341. ISSN: 0022-0833 Open Access Link

Jones, E. and Harrison, D. (2000) 'Investigating the use of TRIZ in eco-innovation'. The TRIZ Journal.Open Access Link

Kang, H., Butler, C., Yang, QP., Sacerdotte, F. and Benati, F. (2000) 'Appearance measurement system using fuzzy logic'.IEEE Instrumentation and Measurement Technology Conference. Baltimore. IEEE. pp. 1124 - 1129. ISSN: 1091-5281 Open Access Link

Lochun, D., Ramsey, B. and Harrison, D. (2000) 'An initial investigation into the low-cost manufacture of diffracting objects'. Journal of Optics A: Pure and Applied Optics, 2 (3). pp. L13 - L15. ISSN: 1464-4258

Huang, Y. and Humphreys, FJ. (2000) 'Subgrain growth and low angle boundary mobility in aluminium crystals of orientation {110}〈001〉'. Acta Materialia, 48 (8). pp. 2017 - 2030. ISSN: 1359-6454

Huang, Y., Ferry, M. and Humphreys, FJ. (2000) 'Plain strain compression of Cube orientated Al-0.05Si single-phase alloy at elevated temperatures'.Matererial Congress 2000 on Materials for 21st Century. Cirencester, UK. 22 - 14 April.

Eskin, DG. (2000) 'Primary solidification in aluminum alloys under melt overheating'.7th International Conference on Aluminium Alloys (ICAA7). CHARLOTTESVILLE, VIRGINIA. 9 - 14 April. TRANS TECH PUBLICATIONS LTD. pp. 155 - 160. ISSN: 0255-5476

Ramsey, BJ. and Harrison, D. (2000) 'Handbook of conductive lithographic films'. ISSN 10: 095383560X ISSN 13: 9780953835607

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Microstructural development of Al–15wt.%Mg2Si in situ composite with mischmetal addition'. Materials Science and Engineering: A, 281 (1-2). pp. 104 - 112. ISSN: 0921-5093

Yan, M. and Fan, Z. (2000) 'The erosion of H21 tool steel in molten A380 alloy'. Journal of Materials Science, 35 (7). pp. 1661 - 1667. ISSN: 0022-2461

Fang, CM., de Wijs, GA., de Groot, RA., Metselaar, R., Hintzen, HT. and de With, G. (2000) 'O/N Ordering in Y₂Si₃O₃N₄ with the Melilite-type Structure from First-Principles Calculations'. Chemistry of Materials, 12 (4). pp. 1071 - 1075. ISSN: 0897-4756

Giacomin, J. (2000) 'Some observations regarding the vibrational environment in child safety seats'. Applied Ergonomics, 31 (2). pp. 207 - 215. ISSN: 0003-6870 Open Access Link

Babu, NH., Rajasekharan, T. and Bai, VS. (2000) 'Use of the ac inductive method to assess the quality of bulk melt textured superconductors'. Physica C: Superconductivity, 330 (3-4). pp. 203 - 207. ISSN: 0921-4534

Campbell, J., Vignjevic, R. and Libersky, L. (2000) 'A contact algorithm for smoothed particle hydrodynamics'. Computer Methods in Applied Mechanics and Engineering, 184 (1). pp. 49 - 65. ISSN: 0045-7825

Vignjevic, R., Campbell, J. and Libersky, L. (2000) 'A treatment of zero-energy modes in the smoothed particle hydrodynamics method'. Computer Methods in Applied Mechanics and Engineering, 184 (1). pp. 67 - 85. ISSN: 0045-7825

Hughes, K. and Vignjevic, R. (2000) 'Finite element modelling of failure of a multi-material target due to high velocity space debris impacts'. Space Debris, 2 (1). pp. 41 - 50. ISSN: 1388-3828

Kambara, M., Nadendla, HB., Shi, YH. and Cardwell, DA. (2000) 'Reduction of porosity in RE1Ba2Cu3Oy pseudo crystals'.International Conference on Materials and Mechanisms of Superconductivity High Temperature Superconductors VI. HOUSTON, TEXAS. 20 - 25 February. ELSEVIER SCIENCE BV. pp. 2473 - 2474. ISSN: 0921-4534

Rees, DWA. (2000) 'Mechanics of solids and structures'. Imperial College Press. ISSN 10: 1860942180 ISSN 13: 9781860942181

Keeble, RJ. and Macredie, RD. (2000) 'Assistant agents for the world wide web intelligent interface design challenges'. Interacting with Computers, 12 (4). pp. 357 - 381. ISSN: 0953-5438

Gallear, D., Ghobadian, A., Liu, J. and Woo, H. (2000) 'Quality and business process synergy: key strategies promoting longevity'. International Journal of Manufacturing Technology and Management, 2 (1,2,3,4,5,6,7). pp. 983 - 993. ISSN: 1368-2148

Atherton, MA., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents. (1) Fundamentals of design procedures'. Internal Medicine : Clinical and Laboratory, 8 (2). pp. 25 - 30. ISSN: 1590-9271 Open Access Link

Shaw, S. and Whiteman, JR. (2000) 'Negative norm error control for second-kind convolution Volterra equations'. Numerische Mathematik, 85 (2). pp. 329 - 341. ISSN: 0029-599X

Grant, AD. and Lawrie, JB. (2000) 'Propagation of fluid-loaded structural waves along a duct with smoothly varying bending characteristics'. The Quarterly Journal of Mechanics and Applied Mathematics, 53 (2). pp. 299 - 321. ISSN: 0033-5614 Open Access Link

Esat, II. and Bahai, H. (2000) 'Vibratory system synthesis for multi-body systems based on genetic algorithm'. Journal of Sound and Vibration, 230 (4). pp. 933 - 948. ISSN: 0022-460X

Lakhany, AM., Marek, I. and Whiteman, JR. (2000) 'Superconvergence results on mildly structured triangulations'. Computer Methods in Applied Mechanics and Engineering, 189 (1). pp. 1 - 75. ISSN: 0045-7825

Djoudi, MS. and Bahai, H. (2000) 'Strain-based shallow shell finite element for circular cylindrical shells'.Engineering Design Conference 2000. BRUNEL UNIV, UXBRIDGE, ENGLAND. PROFESSIONAL ENGINEERING PUBLISHING LTD. pp. 379 - 386.

Rohan, E. and Whiteman, JR. (2000) 'Shape optimization of elasto-plastic structures and continua'. Computer Methods in Applied Mechanics and Engineering, 187 (1-2). pp. 261 - 288. ISSN: 0045-7825

Rees, DWA. (2000) 'High temperature creep-fatigue in stainless steel', in Miannay, D., Costa, P., Francois, D. and Pineau, A. (eds.) Advances in Mechanical Behaviour, Plasticity and Damage: Proceedings of EUROMAT 2000. ELSEVIER SCIENCE BV. pp. 1315 - 1320. ISBN 10: 0-08-042815-0.

Jussel, R. and Atherton, MA. (2000) 'Using QFD improves product development across sites'. Measuring Business Excellence, 4 (1). pp. 28 - 33. ISSN: 1368-3047

Kalganova, T. (2000) 'An extrinsic function-level evolvable hardware approach'.European Conference on Genetic Programming (EuroGP 2000). EDINBURGH, SCOTLAND. Springer. pp. 60 - 75. ISSN: 0302-9743 Open Access Link

Shaw, S., Johnson, AR. and Whiteman, JR. (2000) 'Modelling and finite element analysis of applied polymer viscoelasticity problems'.10th Conference on the Mathematics of Finite Elements and Applications (MAFELAP 1999). BRUNEL UNIV, UXBRIDGE, ENGLAND. Elsevier. pp. 63 - 85.

Bahai, H. (2000) 'Design of insulating joint couplings'.Engineering Design Conference 2000. London, UK. PROFESSIONAL ENGINEERING PUBLISHING LTD. pp. 313 - 326.

Kalganova, T. (2000) 'Bidirectional incremental evolution in extrinsic evolvable hardware'.The Second NASA/DoD Workshop on Evolvable Hardware. PALO ALTO, CA. IEEE. pp. 65 - 74. ISSN: 1550-6029 Open Access Link

Harrey, PM., Evans, PSA., Ramsey, BJ. and Harrison, DJ. (2000) 'Interdigitated capacitors by offset lithography'. Journal of Electronics Manufacturing, 10 (1). pp. 69 - 77. ISSN: 0960-3131

Bocking, J., Giacomin, J., Heidrich, M., Kyprianou, A. and Worden, K. (2000) 'Differential evolution based identification of automotive hydraulic engine mount model parameters'. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 214 (3). pp. 249 - 264. ISSN: 0954-4070

Shaw, S. and Whiteman, JR. (2000) 'Adaptive space-time finite element solution for Volterra equations arising in viscoelasticity problems'. Journal of Computational and Applied Mathematics, 125 (1-2). pp. 337 - 345. ISSN: 0377-0427