Atherton, M., Jensen, F., Kent, R., Leekam, S., McGonigle, D., Rotter, K. and White, L. et al. (2012) 'Anxiogenic sounds for people with Autism Spectrum Disorder'.British Society of Audiology 3rd Annual Conference and Experimental & Clinical Short Papers Meeting. Nottingham.Open Access Link

Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'Formation of Microstructure in Al-Si Alloys Under Ultrasonic Melt Treatment'. Springer International Publishing. pp. 999 - 1004.

Pei, E. (2012) 'Design for manufacturing'. ASSEMBLY AUTOMATION, 32 (2). pp. 111 - 111. ISSN: 0144-5154

CHENG, W., QUE, Z., ZHANG, J., XU, C., LIANG, W. and YOU, B. (2012) 'EFFECTS OF Zn CONTENT ON MICROSTRUCTURE EVO-LUTION AND MECHANICAL PROPERTIES OF INDIRECT-EXTRUDED M}-BSn-Zn ALLOYS'. Acta Metallurgica Sinica, 48 (3). pp. 371 - 371. ISSN: 0412-1961

Rees, DWA. and Taylor, BS. (2012) 'Stress Concentrations for Slotted Plates in Bi-Axial Stress'. Engineering, 04 (02). pp. 69 - 75. ISSN: 1947-3931

Musuva, M. and Mares, C. (2012) 'The Wavelet Finite Element Analysis of a Beam subject to a Moving Load'. Civil-Comp Proceedings, 98. ISSN: 1759-3433

Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'ROLE OF SOLUTE AND TRANSITION METALS IN GRAIN REFINEMENT OF ALUMINUM ALLOYS UNDER ULTRASONIC MELT TREATMENT'.13th International Conference on Aluminum Alloys (ICAA). Carnegie Mellon Univ, Pittsburgh, PA. 1 - 7 June. JOHN WILEY & SONS. pp. 1389 - 1394.

Nowak, M. and Nadendla, HB. (2012) 'Grain Refiner for Aluminium-Silicon Sand Casting Aloys', inLight Metals 2012. Springer International Publishing. pp. 349 - 353. ISBN 13: 9783319485706.

Adetoro, OB., Sim, W-M. and Wen, PH. (2012) 'STABILITY LOBES PREDICTION FOR CORNER RADIUS END MILL USING NONLINEAR CUTTING FORCE COEFFICIENTS'. Machining Science and Technology, 16 (1). pp. 111 - 130. ISSN: 1091-0344 Open Access Link

Fang, CM., van Huis, MA. and Zandbergen, HW. (2012) 'Stability and structures of the CFCC-TmC phases: A first-principles study'. Computational Materials Science, 51 (1). pp. 146 - 150. ISSN: 0927-0256

Ursache, N. and Mares, C. (2012) 'Innovative Teaching and Assessment at Brunel University', inOn Innovative Curriculum through Employer Engagement. Royal Academy of Engineering.

Vignjevic, R. and Hughes, K. (2012) 'Aircraft Seat Compliance (CS25.562) against seat track pre-distortion load case: Use of numerical simulation tools for concept development'.RAES 3rd Aircraft Structural Design Conference. Delft, Netherlands.

Maidin, S., Pei, E. and Campbell, RI. (2012) 'A Taxonomy of Design Features for Additive Manufacture'.iDECON 2012. Melaka.

Pei, E. (2012) 'Experimental 3D Digital Techniques in Design Practice'.The 2nd International Conference on Design Creativity (ICDC2012). Glasgow. Icdc 2012 2nd International Conference on Design Creativity Proceedings. pp. 220 - 226.

Vignjevic, R., Djordjevic, N. and De Vuyst, T. (2012) 'Progressive damage in woven CFRPP in presence of shock waves'. Eccm 2012 Composites at Venice Proceedings of the 15th European Conference on Composite Materials.

Atherton, M., Larrabide, I., Collins, M., Frangi, A., Pereira, VM. and Saxter, T. (2012) 'Effect of stent position on flow characteristics in a cerebral aneurysm'.BioEngineering12. Oxford University.Open Access Link

Yu, Y., Ferri, C., Yang, Q. and Wang, X. (2011) 'Numerical simulation of natural frequencies in the design of micro air vehicle structures'. Proceedings of 2011 17th International Conference on Automation and Computing Icac 2011. pp. 167 - 171.

Bayandorian, I., Fan, Z., Stone, IC., Huang, Y. and Scamans, GM. (2011) 'Advances in Twin Roll Casting of Magnesium Alloys'.The John Hunt International Symposium. Brunel University, Uxbridge, UK. 12 - 14 December. Brunel Unievrsity Press. pp. 319 - 333.

Hunt, JD. and Fan, Z. (2011) 'A simple model for the nucleation and growth of equiaxed grains'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 59 - 78.

Li, H-T., Wang, Y., Zuo, Y. and Fan, Z. (2011) 'Harnessing oxides in liquid metals and alloys'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 93 - 110.

Bayandorian, I., Fan, Z., Stone, IC., Huang, Y. and Scamans, GM. (2011) 'Advances in twin roll casting of magnesium alloys'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 319 - 333.

Mousavi, A. (2011) 'Simulation-based real-time performance monitoring (simmon): A platform for manufacturing and healthcare systems'.Proceedings of the 2011 Winter Simulation Conference. Arizona. 11 - 14 December. IEEE. pp. 600 - 611. ISSN: 0891-7736

Algethmi, M. and De Coster, R. (2011) 'The impact of information technology resources on SME's innovation'.1st International Colloquium on Global Design and Marketing. University of Lincoln, Lincoln, UK. 8 - 9 December. [unpublished]

Yu, X. and Choi, Y. (2011) 'Internal communication between Design and Construction in the Built Environment'.DMI Conference: 2011 Tsinghua-DMI International Design Management Symposium. Hong Kong, China. 3 - 5 December. [unpublished]

Liu, Y., Wu, H-X., Zhang, X-C. and Wang, B. (2011) 'The influence of lattice structure on the dynamic performance of metal hollow sphere agglomerates'. Mechanics Research Communications, 38 (8). pp. 569 - 573. ISSN: 0093-6413

Xu, Y. and Mellor, BG. (2011) 'Characterization of acoustic emission signals from particulate filled thermoset and thermoplastic polymeric coatings in four point bend tests'. Materials Letters, 65 (23-24). pp. 3609 - 3611. ISSN: 0167-577X

Wang, C., Noh, Y., Ishii, H., Kikuta, G., Ebihara, K., Tokumoto, M., Okuyama, I., Yusuke, M., Terunaga, C., Takanishi, A. and Hatake, K. et al. (2011) 'Development of a 3D simulation which can provide better understanding of trainee's performance of the task using airway management training system WKA-1RII'.2011 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 2635 - 2640.

Withnall, R., Silver, J., Catherall, C., Ireland, TG., Fern, GR., Sumner, JWS., Shields, P., Allsopp, D., Reip, PW. and Subbiah, S. et al. (2011) 'Incorporating cerium doped yttrium aluminium garnet (YAG:Ce3+) nanophosphors into gallium nitride LEDs based on photonic crystals'.18th International Display Workshops (IDW '11). Nagoya Congress Ctr, Nagoya, JAPAN. 1 - 9 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 1413 - 1416. ISSN: 1883-2490

Huang, Y., Wang, L., Liu, Y., Zhao, Z., Wu, JT. and Yan, P. (2011) 'Effects of alloying elements on oxidation behavior of a Ni-base superalloy at 1223 K'. Cailiao Rechuli Xuebao Transactions of Materials and Heat Treatment, 32 (12). pp. 1 - 6. ISSN: 1009-6264

Ebihara, K., Noh, Y., Sato, K., Wang, C., Ishii, H., Takanishi, A., Kazuyuki, H. and Shoji, S. et al. (2011) 'Development of airway management training system WKA-4: Control system for simulation of real world condition of patient's motion'.2011 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 1029 - 1034.

Kumar, S., Hari Babu, N., Scamans, GM. and Fan, Z. (2011) 'Microstructural evaluation of melt conditioned twin roll cast Al–Mg alloy'. Materials Science and Technology, 27 (12). pp. 1833 - 1839. ISSN: 0267-0836

Harris, P., Covill, D., Chappell, D., Constanda, C., Ahues, M., Bodmann, B., De Campos Velho, H., Kirsch, A., Mikhailov, S., Mitrea, D., Nastase, A., Pérez, E., Potapenko, S. and Ruotsalainen, K. et al. (2011) 'Preface'. Integral Methods in Science and Engineering Computational and Analytic Aspects. pp. vii - viii.

Silver, J., Withnall, R., Li, R., Lipman, A., Marsh, PJ., Fern, GR., Tarverdi, K., Bishop, P. and Thiebaut, B. et al. (2011) 'Iron doped lithium aluminate embedded in polypropylene as a potential infra-red emitter for stimulating plant growth'.18th International Display Workshops (IDW '11). Nagoya Congress Ctr, Nagoya, JAPAN. 1 - 9 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 1409 - 1412. ISSN: 1883-2490

Bin Hussin, MF., Noor, SZM., Wang, B. and Hipnie, R. (2011) 'Investigation in the readability and reliability of Basic Offshore Safety and Emergency (B.O.S.E.T) test'.2011 IEEE Colloquium on Humanities, Science and Engineering (CHUSER). IEEE. pp. 364 - 369.

Silver, J., Yan, X., Withnall, R., Fern, G., Sumner, J., Shields, P. and Allsopp, D. et al. (2011) 'Embedding manganese doped zinc sulfide quantum dots in gallium nitride LEDs based on photonic crystals'.18th International Display Workshops (IDW '11). Nagoya Congress Ctr, Nagoya, JAPAN. 1 - 9 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 1405 - 1408. ISSN: 1883-2490

Zhang, L., Eskin, DG., Miroux, AG. and Katgerman, L. (2011) 'On the mechanism of the formation of primary intermetallics under ultrasonic melt treatment in an Al-Zr-Ti alloy'. Iop Conference Series Materials Science and Engineering. ISSN: 1757-8981

Fan, Z. and Stone, IC. (2011) 'Solidification Science and Technology'. Uxbridge: Brunel University Press. ISSN 13: 978-1-902316-99-4

Gosler, AG., Connor, OR. and Bonser, RHC. (2011) 'Protoporphyrin and Eggshell Strength: Preliminary Findings from a Passerine Bird'. Avian Biology Research, 4 (4). pp. 214 - 223. ISSN: 1758-1559

Shahab, S., Mirtaheri, M., Mirzaeifar, R. and Bahai, H. (2011) 'Modifying the Shear Buckling Loads of Metal Shear Walls for Improving Their Energy Absorption Capacity'. Advances in Structural Engineering, 14 (6). pp. 1247 - 1257. ISSN: 1369-4332

Holroyd, NJH. and Scamans, GM. (2011) 'Crack Propagation During Sustained-Load Cracking of Al-Zn-Mg-Cu Aluminum Alloys Exposed to Moist Air or Distilled Water'. Metallurgical and Materials Transactions A, 42 (13). pp. 3979 - 3998. ISSN: 1073-5623

Lockton, D., Cain, R., Harrison, D., Giudice, S., Nicholson, L. and Jennings, P. (2011) 'Behaviour change at work: Empowering energy efficiency in the workplace through user-centred design'.Behavior, Energy & Climate Change 2011. Washington, DC. 30 - 2 December. University of California eScholarship Repository.Open Access Link

Atherton, MA., Brown, CJ., Isherwood, J. and Quinn, J. (Accepted) 'Water purification device and method'.

Vanat, Q., Wang, B., Esat, M. and Chizari, M. (2011) 'A biomechanical consideration on immediate post operative mobilisation after medial ulnar collateral ligament reconstruction'.World Congress on Engineering (WCE 2011). Imperial Coll, London, UNITED KINGDOM. 14 - 8 July. INT ASSOC ENGINEERS-IAENG. pp. 2667 - 2670. ISSN: 2078-0958

Mohajeri, N., Raste, R. and Daneshvar, S. (2011) 'An obstacle detection system for blind people'.World Congress on Engineering (WCE 2011). Imperial Coll, London, UNITED KINGDOM. 14 - 8 July. INT ASSOC ENGINEERS-IAENG. pp. 1602 - 1605. ISSN: 2078-0958

Daneshvar, S., Elyasi, M. and Danishvar, M. (2011) 'Multispectral and panchromatic images fusion based on integrating feedback retina and IHS model'.World Congress on Engineering (WCE 2011). Imperial Coll, London, UNITED KINGDOM. 14 - 8 July. INT ASSOC ENGINEERS-IAENG. pp. 1614 - 1618. ISSN: 2078-0958

van Huis, MA., Figuerola, A., Fang, C., Béché, A., Zandbergen, HW. and Manna, L. (2011) 'Chemical Transformation of Au-Tipped CdS Nanorods into AuS/Cd Core/Shell Particles by Electron Beam Irradiation'. Nano Letters, 11 (11). pp. 4555 - 4561. ISSN: 1530-6984

Zhang, Z., Xu, S. and Wang, B. (2011) 'Adaptive actuator failure compensation with unknown control gain signs'. IET Control Theory & Applications, 5 (16). pp. 1859 - 1867. ISSN: 1751-8644

Gratton, G., Mares, C. and Saeed, B. (2011) 'A feasibility assessment of annular winged VTOL flight vehicles'. The Aeronautical Journal, 115 (1173). pp. 683 - 692. ISSN: 0001-9240

Ding, H., Chen, S-J., Ibrahim, R. and Cheng, K. (2011) 'Investigation of the size effect on burr formation in two-dimensional vibration-assisted micro end milling'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (11). pp. 2032 - 2039. ISSN: 0954-4054

Makanjuola, JK., Grange, P., Aggoun, A., Rouse, P., Lanigan, P., Swash, M. and Yamamoto, H. et al. (2011) 'A revolutionary dimension in imaging and minimal access therapy'. JOURNAL OF ENDOUROLOGY, 25. pp. A65 - A66. ISSN: 0892-7790

Tirumalasetty, GK., van Huis, MA., Fang, CM., Xu, Q., Tichelaar, FD., Hanlon, DN., Sietsma, J. and Zandbergen, HW. et al. (2011) 'Characterization of NbC and (Nb,Ti)N nanoprecipitates in TRIP assisted multiphase steels'. Acta Materialia, 59 (19). pp. 7406 - 7415. ISSN: 1359-6454