Falticeanu, CL., Chang, ITH., Kim, JS. and Cook, R. (2007) 'Sintering Behaviour of Al-Cu-Mg-Si Blends'. Trans Tech Publications Ltd.. pp. 597 - 600. ISSN: 0255-5476

Kim, JS., Jiang, K., Falticeanu, CL., Davies, GJ. and Chang, ITH. (2007) 'Making Alumina Microcomponents From Al Powder'. Trans Tech Publications Ltd.. pp. 1041 - 1044. ISSN: 0255-5476

Du, Q., Eskin, DG. and Katgerman, L. (2006) 'Modelling macrosegregation during DC casting of a binary aluminium alloy'. Modeling of Casting Welding and Advanced Solidification Processes Xi, 1. pp. 235 - 242.

Silver, J., Withnall, R., Fern, GR., Marsh, PJ., Ireland, TG. and Salimian, A. (2006) 'Correlating the ACEL performance of phosphor powders ZnS:Cu,X(X = Cl, Br) with their charge trap characteristics'.13th International Display Workshop (IDW'06). Otsu, Japan. 6 - 8 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 421 - 422.

Wang, B., Zheng, J. and Shu, D. (2006) 'Dynamic strength and strain rate sensitivity of 37 wt% Pb 63 wt% Sn eutectic solders'.6th Asia-Pacific Symposium on Engineering Plasticity and its Applications (AEPA2002). UNIV SYDNEY, SYDNEY, AUSTRALIA. 6 - 8 December. Trans Tech Publications, Ltd.. pp. 181 - 186. ISSN: 1013-9826

Xu, Y. and Hutchings, IM. (2006) 'Cold spray deposition of thermoplastic powder'. Surface and Coatings Technology, 201 (6). pp. 3044 - 3050. ISSN: 0257-8972

Chong, TP., Joseph, PF. and Davies, POAL. (2006) 'Design of a quiet open jet facility for the measurement of aerofoil noise'. Institute of Acoustics Spring Conference Futures in Acoustics 2006 Today S Research Tomorrow S Careers. pp. 149 - 158.

Zhang, SM., Zhen, Z. and Fan, Z. (2006) 'Direct Chill Rheocasting (DCRC) and extrusion of AZ31 Mg-Alloy'. Institute of Cast Metals Engineers 67th World Foundry Congress Wfc06 Casting the Future. pp. 1128 - 1137.

Wang, Y., Liu, G. and Fan, Z. (2006) 'Mechanical properties and microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment'. Institute of Cast Metals Engineers 67th World Foundry Congress Wfc06 Casting the Future. pp. 295 - 304.

Fang, X., Patel, J. and Fan, Z. (2006) 'Microstructure and mechanical properties of rheo-diecast (RDC) aluminium alloys'. Institute of Cast Metals Engineers 67th World Foundry Congress Wfc06 Casting the Future. pp. 1109 - 1118.

Mendis, CL., Muddle, BC. and Nie, JF. (2006) 'Characterization of intermetallic particles in a Mg–8Zn–4Al–0.5Ca (wt%) casting alloy'. Philosophical Magazine Letters, 86 (12). pp. 755 - 762. ISSN: 0950-0839

Diamond, GG., Hutchins, DA., Gan, TH., Purnell, P. and Leong, KK. (2006) 'Single-sided capacitive imaging for NDT'. Insight - Non-Destructive Testing and Condition Monitoring, 48 (12). pp. 724 - 730. ISSN: 1354-2575

Mares, C. and Lockerby, D. (2006) 'Developing professional skills through group design projects and participation in student competitions'. Proceedings of the International Conference on Innovation Good Practice and Research in Engineering Education 2006 EE 2006. pp. 323 - 325.

Hone, K. and Axelrod, L. (2006) 'Human factors evaluation of systems that recognise and respond to user emotion'. Contemporary Ergonomics 2006. pp. 208 - 212.

Silver, J., Withnall, R., Staple, A., Lipman, A., Ireland, T., Fern, GR., Harris, PG., English, RJ. and Heaton, JR. et al. (2006) 'Development of printable phosphor inks for high definition displays'. Digest of Technical Papers SID International Symposium. pp. 1275 - 1278. ISSN: 0097-966X

Silver, J., Withnall, R., Marsh, PJ., Lipman, A., Ireland, T. and Fern, GR. (2006) 'High density packing of submicrometer spherical particles of the y 2O3: Eu3+ phosphor for low voltage FPDs'. Digest of Technical Papers SID International Symposium. pp. 648 - 651. ISSN: 0097-966X

Cheesewright, R. and Shaw, S. (2006) 'Uncertainties associated with finite element modelling of Coriolis mass flow meters'. Flow Measurement and Instrumentation, 17 (6). pp. 335 - 347. ISSN: 0955-5986

Rees, A., Dimov, SS., Ivanov, A., Herrero, A. and Uriarte, LG. (2006) 'Micro EDM: Accuracy of on-the-machine dressed electrodes', in Menz, W., Dimov, SS. and Fillon, B. (eds.) 4M 2006: Second International Conference on Multi-Material Micro Manufacture. Elsevier Science. pp. 361 - 364. ISBN 10: 0080452639. ISBN 13: 9780080452630.

Reza-Shabgard, M., Ivanov, A. and Rees, A. (2006) 'Influence of EDM machining on surface integrity of WC-Co', in Menz, W., Dimov, SS. and Fillon, B. (eds.) 4M 2006: Second International Conference on Multi-Material Micro Manufacture. Elsevier Science. pp. 331 - 334. ISBN 10: 0080452639. ISBN 13: 9780080452630.

Tavakoli, S. and Mousavi, A. (2006) 'Input variable monitoring for quick-response decision making in volatile systems'.Virtual Concept 2006. Cancun, Mexico. 26 - 1 December. Proceedings of Virtual Concept 2006.

Perry, MA., Bates, RA., Atherton, MA. and Oldfield, M. (2006) 'Analytical sensitivity analysis using COMSOL: Model development, validation and results'.COMSOL UK Users Conference. Birmingham. 16 [unpublished]

Giacomin, J. and Berber-Solano, TP. (2006) 'Effect of transient event frequency content and scale on the human detection of road surface type'.Joint Baltic-Nordic Acoustics Meeting. Gothenburg, Sweden. 8 - 10 November. BNAM.Open Access Link

Rees, DWA. (2006) 'Forming properties of four high-strength sheet steels'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (11). pp. 1815 - 1825. ISSN: 0954-4054

Ambat, R., Davenport, AJ., Scamans, GM. and Afseth, A. (2006) 'Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminium'. Corrosion Science, 48 (11). pp. 3455 - 3471. ISSN: 0010-938X

Luo, P., Lü, K., Huang, R., He, Q. and Shi, Z. (2006) 'A heterogeneous computing system for data mining workflows in multi-agent environments'. Expert Systems: The Journal of Knowledge Engineering, 23 (5). pp. 258 - 272. ISSN: 1468-0394 Open Access Link

Ariyatum, B., Unnanon, K., Nakngoenthong, J., Phuchamnong, A. and Soparat, J. (2006) 'Rapid moulding using an epoxy resin composite'.Asian Symposium on Materials and Processing (ASMP). Bangkok, Thailand. [unpublished]

Ariyatum, B., Unnanon, K., Nakngoenthong, J., Phuchamnong, A. and Soparat, J. (2006) 'Rapid moulding using the selective Laser Sintering (SLS) technique'.Asian Symposium on Materials and Processing (ASMP). Bangkok, Thailand. [unpublished]

Ivanov, A., Uriate, L., Herrero, A., Oosterling, H., Staemmler, L., Tang, PT. and Allen, D. et al. (2006) 'A comparison between microfabrication technologies for metal tooling'. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 220 (11). pp. 1665 - 1676. ISSN: 0954-4062

Gan, TH., Pallav, P. and Hutchins, DA. (2006) 'Non-contact ultrasonic quality measurements of food products'. Journal of Food Engineering, 77 (2). pp. 239 - 247. ISSN: 0260-8774

Mendis, CL., Bettles, CJ., Gibson, MA. and Hutchinson, CR. (2006) 'An enhanced age hardening response in Mg–Sn based alloys containing Zn'. Materials Science and Engineering: A, 435-436. pp. 163 - 171. ISSN: 0921-5093

Loong, C-K., Kolesnikov, AI., Koyanaka, H., Takeuchi, K. and Fang, C. (2006) 'Extraction of metals from natural waters: A neutron characterization of the nanostructured manganese-oxide-based adsorbents'. Physica B: Condensed Matter, 385-386. pp. 493 - 495. ISSN: 0921-4526

Rivière, B. and Shaw, S. (2006) 'Discontinuous Galerkin finite element approximation of nonlinear non-Fickian diffusion in viscoelastic polymers'. SIAM Journal on Numerical Analysis, 44 (6). pp. 2650 - 2670. ISSN: 0036-1429

Alfano, G. and Sacco, E. (2006) 'Combining interface damage and friction in a cohesive-zone model'. International Journal for Numerical Methods in Engineering, 68 (5). pp. 542 - 582. ISSN: 0029-5981 Open Access Link

Hughes, K. and Vignjevic, R. (2006) 'Application of the finite element method for developing helicopter crashworthiness for impacts on water : Implications for virtual testing'.Virtual Testing - RAeS. London. [unpublished]

Ji, S., Qian, M. and Fan, Z. (2006) 'The creep behaviour of rheo-diecast AZ91D (Mg-9Al-1Zn) alloy'. Materials Science and Engineering: A, 434 (1-2). pp. 7 - 12. ISSN: 0921-5093

Ivanov, A., Gandarias, E., Aristimuno, P., Arrozola, P., Lizaralde R. and Dimov, S. (2006) 'Deteccion de rotura de herramientas en el microfresado mediante nuevos sistemas de monitorizado'.XVI Congreso de Maquinas-Herramienta y Technologias de Fabricacion. Donostia - Spain. 20

Vignjevic, R., Reveles, JR. and Campbell, J. (2006) 'SPH in a total lagrangian formalism'. CMES Computer Modeling in Engineering and Sciences, 14 (3). pp. 181 - 198. ISSN: 1526-1492

Parente, MPL., Valente, RAF., Natal Jorge, RM., Cardoso, RP. and Alves de Sousa, R. (2006) 'Sheet Metal Forming Simulation Using EAS Solid-Shell Finite Elements'. Finite Elements in Analysis and Design, 42. pp. 1137 - 1149. ISSN: 0168-874X

Eskin, DG., Du, Q. and Katgerman, L. (2006) 'Scale rules for macrosegregation during direct-chill casting of aluminum alloys'.Symposium on Solid-State Necleation and Critical Nuclei during Fires-Order Diffusional Phase Transformations. Cincinnati, OH. 15 - 19 October. SPRINGER. pp. 1206 - 1212. ISSN: 1073-5623

Cheng, K. and Webb, D. (2006) 'Special issue on “Digital Manufacturing and Enterprise Technologies”'. The International Journal of Advanced Manufacturing Technology, 30 (9-10). pp. 909 - 910. ISSN: 0268-3768

Cardoso, RP., Yoon, JW. and Fontes Valente, RA. (2006) 'A new approach to reduce membrane and transverse shear locking for one point quadrature shell elements: linear formulation'. International Journal for Numerical Methods in Engineering, 66. pp. 214 - 249. ISSN: 1097-0207

Hari Babu, N., Iida, K., Shi, Y. and Cardwell, DA. (2006) 'Processing of high performance (LRE)-Ba–Cu–O large, single-grain bulk superconductors in air'. Physica C: Superconductivity and its Applications, 445-448 (1-2). pp. 286 - 290. ISSN: 0921-4534

Koblischka-Veneva, A., Koblischka, MR., Hari Babu, N., Cardwell, DA. and Mücklich, F. (2006) 'Embedded Y2Ba4CuNbOx nanoparticles in melt-textured YBCO studied by means of EBSD'. Physica C: Superconductivity and its Applications, 445-448 (1-2). pp. 379 - 381. ISSN: 0921-4534

Hari Babu, N., Iida, K. and Cardwell, DA. (2006) 'Enhanced magnetic flux pinning in nano-composite Y–Ba–Cu–O superconductors'. Physica C: Superconductivity and its Applications, 445-448 (1-2). pp. 353 - 356. ISSN: 0921-4534

Shi, Y., Hari Babu, N., Iida, K. and Cardwell, DA. (2006) 'The influence of Nd–Ba–Cu–Mg–O generic seed crystal composition on Tc of seeded, bulk (RE)–Ba–Cu–O grains'. Physica C: Superconductivity and its Applications, 445-448 (1-2). pp. 295 - 298. ISSN: 0921-4534

Withnell, TD., Babu, NH., Iida, K., Shi, Y., Cardwell, DA., Haindl, S., Hengstberger, F. and Weber, HW. et al. (2006) 'The effect of seed orientation and separation on the field trapping properties of multi-seeded, melt processed Y–Ba–Cu–O'. Physica C: Superconductivity and its Applications, 445-448 (1-2). pp. 382 - 386. ISSN: 0921-4534

Iida, K., Babu, NH., Withnell, TD., Shi, Y., Haindl, S., Weber, HW. and Cardwell, DA. et al. (2006) 'High-performance single grain Y–Ba–Cu–O bulk superconductor fabricated by seeded infiltration and growth'. Physica C: Superconductivity and its Applications, 445-448 (1-2). pp. 277 - 281. ISSN: 0921-4534

Cardwell, DA. and Hari Babu, N. (2006) 'Processing and properties of single grain (RE)–Ba–Cu–O bulk superconductors'. Physica C: Superconductivity and its Applications, 445-448 (1-2). pp. 1 - 7. ISSN: 0921-4534

Chen, Z. and Lü, K. (2006) 'A preprocess algorithm of filtering irrelevant information based on the minimum class difference'. Knowledge-Based Systems, 19 (6). pp. 422 - 429. ISSN: 0950-7051

Eskin, DG., Du, Q. and Katgerman, L. (2006) 'Relationship between shrinkage-induced macrosegregation and the sump profile upon direct-chill casting'. Scripta Materialia, 55 (8). pp. 715 - 718. ISSN: 1359-6462