Areir, M., Xu, Y., Harrison, D., Fyson, J. and Zhang, R. (2017) 'Development of 3D printing technology for the manufacture of flexible electric double-layer capacitors'. Materials and Manufacturing Processes, 33 (8). pp. 1 - 7. ISSN: 1042-6914

Wang, B., Tan, D., Lee, TL., Khong, JC., Wang, F., Eskin, D., Connolley, T., Fezzaa, K. and Mi, J. et al. (2017) 'Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound'. Acta Materialia, 144. pp. 505 - 515. ISSN: 1359-6454 Open Access Link

Szabo, I., Sun, J., Feng, G., Kanfoud, J., Gan, TH. and Selcuk, C. (2017) 'Automated defect recognition as a critical element of a three dimensional X-ray computed tomography imaging-based smart non-destructive testing technique in additive manufacturing of near net-shape parts'. Applied Sciences (Switzerland), 7 (11). pp. 1156 - 1156. ISSN: 2076-3417 Open Access Link

Hosseinzadeh, S., Larijani, H., Curtis, K., Wixted, A. and Amini, A. (2017) 'Empirical propagation performance evaluation of LoRa for indoor environment'.2017 IEEE 15th International Conference on Industrial Informatics (INDIN). Univ Appl Sci Emden Leer, Emden, GERMANY. 10 - 26 July. IEEE. pp. 26 - 31. ISSN: 1935-4576

Sun, C., Jiang, Y. and Yang, Q. (2017) 'Design of control system using electric cylinder for automated measurement of bearing shell crush height'. International Journal of Advanced Manufacturing Technology, 95 (1-4). pp. 983 - 989. ISSN: 0268-3768 Open Access Link

Song, L., Cheng, K., Ding, H. and Chen, S. (2017) 'Analysis on discharge coefficients in FEM modeling of hybrid air journal bearings and experimental validation'. Tribology International, 119. pp. 549 - 558. ISSN: 0301-679X

Ji, S., Xixi Dong. and Zhang, Y. (Accepted) 'High strength and ductility die cast aluminium alloy'.

Lowe, PS., Duan, W., Kanfoud, J. and Gan, TH. (2017) 'Structural health monitoring of above-ground storage tank floors by ultrasonic guidedwave excitation on the tank wall'. Sensors (Switzerland), 17 (11). pp. 2542 - 2542. ISSN: 1424-8220 Open Access Link

Dong, W., Yuan, W., Zhou, X. and Wang, F. (2017) 'The Fracture Mechanism of Circular/elliptical Concrete Rings under Restrained Shrinkage and Drying from Top and Bottom Surfaces'. Engineering Fracture Mechanics, 189. pp. 148 - 163. ISSN: 0013-7944 Open Access Link

Jackson, MJ., Cheng, K. and Chen, X. (2017) 'Special Issue: Grinding Technology-Commemorating the Scientific Contributions by Professor Stephen Malkin'. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139 (12). ISSN: 1087-1357

Cheng, K., Shao, Y., Bodenhorst, R. and Jadva, M. (2017) 'Modeling and simulation of material removal rates and profile accuracy control in abrasive flow machining of the integrally bladed rotor blade and experimental perspectives'. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139 (12). pp. 1 - 8. ISSN: 1087-1357

Tang, J., Soua, S., Mares, C. and Gan, T-H. (2017) 'A pattern recognition approach to acoustic emission data originating from fatigue of wind turbine blades'. Sensors, 17 (11). pp. 1 - 12. ISSN: 1424-8220 Open Access Link

Scamans, G. (2017) 'Advanced aluminium automotive engineering conference 2017'. Light Metal Age, 75 (6). pp. 10 - 15. ISSN: 0024-3345

Arvanaghi, R., Daneshvar, S., Seyedarabi, H. and Goshvarpour, A. (2017) 'Fusion of ECG and ABP signals based on wavelet transform for cardiac arrhythmias classification'. Computer Methods and Programs in Biomedicine, 151. pp. 71 - 78. ISSN: 0169-2607

Geng, H., Wang, Z., Liang, Y., Cheng, Y. and Alsaadi, FE. (2017) 'Tobit Kalman filter with fading measurements'. Signal Processing, 140. pp. 60 - 68. ISSN: 0165-1684

Manoylov, A., Lebon, B., Djambazov, G. and Pericleous, K. (2017) 'Coupling of Acoustic Cavitation with Dem-Based Particle Solvers for Modeling De-agglomeration of Particle Clusters in Liquid Metals'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (11). pp. 5616 - 5627. ISSN: 1073-5623

Geng, H., Wang, Z., Liang, Y., Cheng, Y. and Alsaadi, FE. (2017) 'State estimation for asynchronous sensor systems with Markov jumps and multiplicative noises'. Information Sciences, 417. pp. 1 - 19. ISSN: 0020-0255

Kalganova, T. and Dzalbs, I. (2017) 'Multi-step ahead forecasting using Cartesian Genetic Programming', in Stepney, S. and Adamatzky, A. (eds.) Inspired by Nature. Springer, Cham. pp. 235 - 246. ISBN 13: 9783319679969. Open Access Link

Kogo, B., Wang, B., Wrobel, L. and Chizari, M. (2017) 'Thermal analysis of girth welded joints of dissimilar metals in pipes with varying clad thicknesses'.ASME 2017 Pressure Vessels and Piping Conference. Waikoloa, Hawaii, USA. 26 - 20 July. American Society of Mechanical Engineers. pp. 1 - 9. ISSN: 0277-027X

Wang, L., Eren, E., Wang, B. and Wu, G. (2017) 'Consideration of yield discontinuity in the elastic-plastic fracture analysis of circumferentially flawed pipes'.ASME 2017 Pressure Vessels and Piping Conference. Waikoloa, Hawaii, USA. 26 - 20 July. American Society of Mechanical Engineers. ISSN: 0277-027X

Kastiukas, G., Zhou, X. and Yang, W. (2017) 'Testing Rheological Properties of Alkali-Activated Cement Using Non-Traditional Test Methods'.REMINE International Conference. Covilha, Portugal. 25 - 27 October.

Wan, K., Zhou, X., Kastiukas, G., Zhou, W. and Mei, X. (2017) 'Bond Properties of Natural Fibre Reinforced Inorganic Matrix Composites for Structural Retrofitting'.REMINE International Conference. Covilha, Portugal. 25 - 27 October.

Lais, H., Lowe, PS., Kanfoud, J. and Gan, TH. (2017) 'Application of high power ultrasonics for fouling removal in submerged structures'.OCEANS 2017 - Aberdeen. Aberdeen, ENGLAND. 25 - 22 June. IEEE. pp. 1 - 8. ISSN: 0197-7385

Sareh, S., Althoefer, K., Li, M., Noh, Y., Tramacere, F., Sareh, P., Mazzolai, B. and Kovac, M. et al. (2017) 'Anchoring like octopus: Biologically inspired soft artificial sucker'. Journal of the Royal Society Interface, 14 (135). pp. 20170395 - 20170395. ISSN: 1742-5689 Open Access Link

Fan, Q., Cheng, K., Cao, Y. and Huang, L. (2017) 'Cathode design for precision electrochemical machining of straight teeth face gear'.2017 23rd International Conference on Automation and Computing (ICAC). IEEE.

Kim, YM., Mendis, C., Sasaki, T., Letzig, D., Pyczak, F., Hono, K. and Yi, S. et al. (2017) 'Erratum to “Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution” (Scr. Mater. (2017) (136) (41–45) (S135964621730177X) (10.1016/j.scriptamat.2017.04.001))'. Scripta Materialia, 145. pp. 131 - 131. ISSN: 1359-6462

Dong, X., Zhang, Y., Amirkhanlou, S. and Ji, S. (2017) 'High performance gravity cast Al9Si0.45Mg0.4Cu alloy inoculated with AlB2and TiB2'. Journal of Materials Processing Technology, 252. pp. 604 - 611. ISSN: 0924-0136 Open Access Link

Vuyst, TD., Vignjevic, R., Campbell, JC., Klavzar, A. and Seidl, M. (2017) 'A Study of the effect of aspect ratio on fragmentation of explosively driven cylinders'.14th Hypervelocity Impact Symposium (HVIS). Univ Kent, Canterbury Campus, Canterbury, ENGLAND. 18 - 28 April. Elsevier BV. pp. 194 - 201. ISSN: 1877-7058 Open Access Link

Cavallaro, M. and Armillotta, A. (2017) 'Edge quality in Fused Deposition Modeling: I. Definition and analysis'. Rapid Prototyping Journal, 23 (6). pp. 1079 - 1087. ISSN: 1355-2546 Open Access Link

Mohammadi, V., Nihtianov, S. and Fang, C. (2017) 'A doping-less junction-formation mechanism between n-silicon and an atomically thin boron layer'. Scientific Reports, 7 (1). pp. 1 - 9. ISSN: 2045-2322 Open Access Link

Suthakar, U., Magnoni, L., Smith, DR. and Khan, A. (2017) 'Optimised lambda architecture for monitoring wlcg using spark and spark streaming'.2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop (NSS/MIC/RTSD). Strasbourg, FRANCE. 16 - 6 November. IEEE. ISSN: 1095-7863

Yasseri, S. and Bahai, H. (Accepted) 'Prognosis of Time to Failure of Corroding Pipelines'. International Journal of coastal and offshore engineering, 1 (2). pp. 11 - 20. ISSN: 2538-2667

Gutt, R., Kohr, M., Mikhailov, SE. and Wedland, WL. (2017) 'On the mixed problem for the semilinear Darcy-Forchheimer-Brinkman PDE system in Besov spaces on creased Lipschitz domains'. Mathematical Methods in the Applied Sciences, 40 (18). pp. 7780 - 7829. ISSN: 0170-4214 Open Access Link

Ji, S. (2017) 'Revisit of Al-Si-Mg (Cu) cast alloys for gravity and high pressure die casting: Microstructure and mechanical properties'.Materials Science and Technology (MS&T17). Pittsburgh. 9 - 12 October.

Aicken, CRH., Sutcliffe, LJ., Gibbs, J., Tickle, LJ., Hone, K., Harding-Esch, EM., Mercer, CH., Sonnenberg, P., Sadiq, ST., Estcourt, CS. and Shahmanesh, M. et al. (2017) 'Using the eSexual Health Clinic to access chlamydia treatment and care via the internet: a qualitative interview study'. Sexually Transmitted Infections, 94 (4). pp. 241 - 247. ISSN: 1368-4973 Open Access Link

Hosseini Kordkheili, SA., Momeni Massouleh, SH., Hajirezayi, S. and Bahai, H. (2017) 'Experimental identification of closely spaced modes using NExT-ERA'. Journal of Sound and Vibration, 412. pp. 116 - 129. ISSN: 0022-460X

Silver, J., Harris, P. and Fern, G. (Accepted) 'Method for identifying plastics for recycling'.

Alsubaie, B. and Yang, Q. (2017) 'Maintenance Process Improvement Model by Integrating LSS and TPM for Service Organisations'.International QR2MSE2016 & WCEAM2016. Jiuzhaigou, China. 4 - 28 July. Springer International Publishing. pp. 13 - 24. ISSN: 2195-4356 Open Access Link

Lam, B. and Choi, Y. (2017) 'Emerging Trends in Design Management Education in the UK'. Design Management Review, 28 (3). pp. 24 - 29. ISSN: 1948-7169 Open Access Link

Yang, H., Cao, E., Lu, K. and Zhang, G. (2017) 'Optimal contract design for dual-channel supply chains under information asymmetry'. Journal of Business and Industrial Marketing, 32 (8). pp. 1087 - 1097. ISSN: 0885-8624 Open Access Link

Zhang, T., Gao, F. and Jiang, X. (2017) 'Surface topography acquisition method for double-sided near-right-angle structured surfaces based on dual-probe wavelength scanning interferometry'. Optics Express, 25 (20). pp. 24148 - 24156. ISSN: 1094-4087

Ren, FL., Wang, JG., Ge, HH., Li, J., Hu, Q., Nadendla, HB., Xia, MX. and Li, JG. et al. (2017) 'A Homogeneous Billet Layer Casting Fabrication Method'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (10). pp. 4453 - 4457. ISSN: 1073-5623

Giacomin, J. (2017) 'What Is Design For Meaning?'. Journal of Design, Business and Society, 3 (2). pp. 167 - 190. ISSN: 2055-2106 Open Access Link

Jayasree, NA., Airale, AG., Ferraris, A., Messana, A., Sisca, L. and Carello, M. (2017) 'Process analysis for structural optimisation of thermoplastic composite component using the building block approach'. Composites Part B: Engineering, 126. pp. 119 - 132. ISSN: 1359-8368

Arvanaghi, R., Daneshvar, S., Seyedarabi, H. and Goshvarpour, A. (2017) 'Classification of cardiac arrhythmias using arterial blood pressure based on discrete wavelet transform'. Biomedical Engineering - Applications, Basis and Communications, 29 (5). pp. 1750034 - 1750034. ISSN: 1016-2372

Goshvarpour, A., Abbasi, A., Goshvarpour, A. and Daneshvar, S. (2017) 'Discrimination between different emotional states based on the chaotic behavior of galvanic skin responses'. Signal, Image and Video Processing, 11 (7). pp. 1347 - 1355. ISSN: 1863-1703

Armillotta, A., Bellotti, M. and Cavallaro, M. (2017) 'Warpage of FDM parts: Experimental tests and analytic model'. Robotics and Computer-Integrated Manufacturing, 50. pp. 140 - 152. ISSN: 0736-5845 Open Access Link

Fang, CM. and van Huis, MA. (2017) 'Structure and stability of hcp iron carbide precipitates: A first-principles study'. Heliyon, 3 (9). pp. 1 - 15. ISSN: 2405-8440 Open Access Link

Hosseini, S., Swash, MR. and Sadka, A. (2017) 'Immersive 360 Holoscopic 3D system design'.Signal Processing and Integrated Networks (SPIN), 2017. India. 25 - 3 February. IEEE. pp. 325 - 329.

Aondoakaa, AS., Swash, MR. and Sadka, A. (2017) '3D depth estimation from a holoscopic 3D image'.Signal Processing and Integrated Networks (SPIN), 2017. India. 25 - 3 February. IEEE. pp. 320 - 324.

Huang, Y., Swash, MR. and Sadka, A. (2017) 'Innovative 3D pixal mapping method for LED holoscopic 3D display'.2017 4th International Conference on Signal Processing and Integrated Networks (SPIN). Amity Univ, Noida, INDIA. 25 - 3 February. IEEE. pp. 330 - 333.