IMM
Dimlaye, V., Mudge, P. and Gan, TH. (2013) 'An unsupervised learning for damage detection using ultrasonic guided waves in GFRP material for tidal application'. 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013 CM 2013 and Mfpt 2013. pp. 623 - 632.
Das, S., Ji, S., El Fakir, O., Wang, L., Dear, J., Lin, J., et al. (2013) 'Melt conditioned twin roll casting (MC-TRC) of thin Mg-alloy strips for direct stamping of Mg components'. Materials Science Forum, 765. pp. 170 - 174. ISSN: 0255-5476
Rohan, E., Shaw, S. and Whiteman, JR. (2013) 'Poro-viscoelasticity modelling based on upscaling quasistatic fluid-saturated solids'. Computational Geosciences, 18 (5). pp. 1 - 13. ISSN: 1420-0597
Combe, N., Harrison, D. and Dong, H. (2013) 'Designing Technology for Older People – The Role of Technical Self-confidence in Usability of an Inclusive Heating Control'. Springer Berlin Heidelberg. pp. 49 - 56. ISSN: 0302-9743
Xie, J., Hone, K., Xie, W., Gao, X., Shi, Y. and Liu, X. (2013) 'Extending twin support vector machine classifier for multi-category classification problems'. Intelligent Data Analysis, 17 (4). pp. 649 - 664. ISSN: 1088-467X Open Access Link
Bolzoni, L., Hari Babu, N., Ruiz-Navas, EM. and Gordo, E. (2013) 'Comparison of Microstructure and Properties of Ti-6Al-7Nb Alloy Processed by Different Powder Metallurgy Routes'. Key Engineering Materials, 551. pp. 161 - 179. ISSN: 1013-9826
Harrison, D., Qiu, F., Fyson, J., Xu, Y., Evans, P. and Southee, D. (2013) 'A coaxial single fibre supercapacitor for energy storage'. Physical Chemistry Chemical Physics, 15 (29). pp. 12215 - 12215. ISSN: 1463-9076
Cassinath, Z., Xia, M., Huang, Y. and Fan, Z. (2013) 'Process optimization and microstructure control for twin screw rheo-extrusion of an AZ91D magnesium alloy'. Materials Science Forum, 765. pp. 439 - 443. ISSN: 0255-5476
Ji, S., Jiang, B., Yang, W. and Fan, Z. (2013) 'Melt quenched high pressure die casting (MQ-HPDC) of an A356 alloy'. Materials Science Forum, 765. pp. 195 - 199. ISSN: 0255-5476
Al-Helal, K., Wang, Y., Stone, I. and Fan, Z. (2013) 'Effect of Ca level on the formation of silicon phases during solidification of hypereutectic Al-Si alloys'. Materials Science Forum, 765. pp. 117 - 122. ISSN: 0255-5476
Zuo, YB., Fan, Z., Zhu, QF., Lei, L. and Cui, JZ. (2013) 'Modification of a hypereutectic aluminium silicon alloy under the influence of intensive melt shearing'. Material Science Forum, 765. pp. 140 - 144. ISSN: 0255-5476
Ji, S., Watson, D., Wang, Y., White, M. and Fan, Z. (2013) 'Effect of Ti addition on mechanical properties of high pressure die cast Al-Mg-Si alloys'. Materials Science Forum, 765. pp. 23 - 27. ISSN: 0255-5476
Li, H-T., Scamans, G. and Fan, Z. (2013) 'Refinement of the microstructure of an Al-Mg2Si hypereutectic alloy by intensive melt shearing'. Materials Science Forum, 765. pp. 97 - 101. ISSN: 0255-5476
Bolzoni, L., Nowak, M. and Hari Babu, N. (2013) 'Influence of a Novel Master Alloy Addition on the Grain Refinement of Al-Si Cast Alloys'. Materials Science Forum, 765. pp. 311 - 315. ISSN: 0255-5476
Wang, Y., Li, H-T., Fan, Z. and Scamans, G. (2013) 'Characterisation of oxide films in Al-Mg alloy melts materials'. Materials Science Forum, 765. pp. 220 - 224. ISSN: 0255-5476
Peng, G., Wang, Y. and Fan, Z. (2013) 'Effect of intensive melt shearing and Zr content on grain refinement of Mg-0.5Ca-xZr alloys'. Materials Science Forum, 765. pp. 336 - 340. ISSN: 0255-5476
Xue, X., Wang, Y., Stone, I. and Fan, Z. (2013) 'Hot cracking susceptibility in the TIG joint of AZ31 Mg-Alloy plates produced by the TRC process with and without intensive melt shearing'. Materials Science Forum, 765. pp. 756 - 760. ISSN: 0255-5476
Xia, M., Prasada Rao, AK. and Fan, Z. (2013) 'Solidification mechanisms in melt conditioned direct chill (MC-DC) cast AZ31 billets'. Materials Science Forum, 765. pp. 291 - 295. ISSN: 0255-5476
Yan, F., Ji, S. and Fan, Z. (2013) 'Effect of excess Mg on the microstructure and mechanical properties of Al-Mg2Si high pressure die casting alloys'. Materials Science Forum, 765. pp. 64 - 68. ISSN: 0255-5476
Ponomarev, MG., Kappatos, V., Selcuk, C., Gan, T-H., Amos, M., Halai, H., et al. (2013) 'Digital radiographic inspection technique for production friendly quality assessment of PM parts'. Powder Metallurgy, 56 (2). pp. 92 - 95. ISSN: 0032-5899
Huang, Y., Liu, D-B., Xia, M. and Anguilano, L. (2013) 'Characterization of an Mg-2Zn-1Ca 1b-TCP composite fabricated by high shear solidification and ECAE'. Materials Science Forum, 765. pp. 813 - 817. ISSN: 1662-9752
Spieser, A. and Ivanov, A. (2013) 'Recent developments and research challenges in electrochemical micromachining (μECM)'. International Journal of Advanced Manufacturing Technology, 69 (1-4). pp. 563 - 581. ISSN: 0268-3768
Yan, H. (2013) 'A New Approach to Solute Effect on Grain Boundary Migration'. Materials Science Forum, 753. pp. 131 - 134. ISSN: 0255-5476
Musto, M. and Alfano, G. (2013) 'A novel rate-dependent cohesive-zone model combining damage and visco-elasticity'. Computers and Structures, 118. pp. 126 - 133. ISSN: 0045-7949 Open Access Link
Lam, B. and Choi, Y. (2013) 'Comparing learning styles of western and eastern students in postgraduate design management programmes'. International Journal of Mechanical Engineering Education, 41 (4). pp. 282 - 288. ISSN: 0306-4190
Bolzoni, L., Nowak, M., Yan, F. and Hari Babu, N. (2013) 'Grain Refiner Development for Al Containing Mg Alloys'. Materials Science Forum, 765. pp. 145 - 149. ISSN: 0255-5476
Chacon, JLF., Andicoberry, EA., Gan, TH., Asfis, G. and Balachandran, W. (2013) 'A comparative study on the use of acoustic emission and vibration analysis for angular misalignment detection using envelope analysis'. 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013 CM 2013 and Mfpt 2013. pp. 598 - 610.
Gkatzidou, V., Hone, K., Gibbs, J., Sutcliffe, L., Sadiq, ST., Esctourt, C. and et al. (2013) 'A user-centred approach to inform the design of a mobile application for STI diagnosis and management.'.British Human Computer Interaction. London. British Computer Society. pp. 27 - 27.
Avdelidis, NP. and Gan, T-H. (2013) 'Non-destructive evaluation (NDE) of Composites: infrared (IR) thermography of wind turbine blades', inNon-Destructive Evaluation (NDE) of Polymer Matrix Composites. Elsevier. pp. 634 - 650e. ISBN 13: 9780857093448.
Tavakoli, S., Mousavi, A. and Poslad, S. (2013) 'Input variable selection in time-critical knowledge integration applications: A review, analysis, and recommendation paper'. Advanced Engineering Informatics. ISSN: 1474-0346
De Coster, R. and McEwen, C. (2013) 'Consumer decision making in mobile-banking service selection'.2nd Cambridge Academic Design Management Conference. Cambridge. University of Cambridge, Institute for Manufacturing. pp. 167 - 180.Open Access Link
Albesher, A. and De Coster, R. (2013) 'Critical routines for higher innovation prosperity: A dynamic capabilities perspective'.2nd Cambridge Academic Design Management Conference. University of Cambridge, Institute for Manufacturing. pp. 181 - 194.
Li, R., Fern, GR., Withnall, R., Silver, J., Bishop, P. and Thiebaut, B. (2013) 'Incorporation of Luminescent Zinc Oxide Nanoparticles into Polystyrene'. MRS Proceedings, 1509. pp. 11 - 17. ISSN: 0272-9172
Subroto, T., Miroux, A., Eskin, DG., Ellingsen, K., Marson, A., M'Hamdi, M. and et al. (2013) 'Tensile mechanical behavior of as-cast AA7050 alloy in the super-solidus temperature range'. 13th International Conference on Fracture 2013 Icf 2013, 3. pp. 2528 - 2536.
Tarhini, A., Hone, K. and Liu, X. (2013) 'User acceptance towards web-based learning systems: Investigating the role of social, organizational and individual factors in european higher education'. Procedia Computer Science, 17. pp. 189 - 197. ISSN: 1877-0509 Open Access Link
Cui, Q., Ding, H. and Cheng, K. (2013) 'A simulation-based investigation on workpiece roundness generation and its perfection strategies in centreless grinding process'. Proceedings of International Conference on Computers and Industrial Engineering CIE, 2. pp. 1194 - 1204.
Tang, QJ., Wang, XJ., Yang, QP. and Liu, CZ. (2013) 'Static temperature analysis and compensation of MEMS gyroscopes'. International Journal of Metrology and Quality Engineering, 4 (3). pp. 209 - 214. ISSN: 2107-6839
Al Reeshi, MA. and Yang, Q. (2013) 'Average outgoing quality of calibration Lab facilities'. International Journal of Metrology and Quality Engineering, 4 (3). pp. 201 - 207. ISSN: 2107-6839
Zhang, R., Xu, Y., Harrison, D., Fyson, J., Qiu, F. and Southee, D. (2013) 'A study of flexible supercapacitors for future energy storage'. Icac 2013 Proceedings of the 19th International Conference on Automation and Computing Future Energy and Automation. pp. 87 - 90.
Chong, TP. and Joseph, PF. (2013) 'An experimental study of airfoil instability tonal noise with trailing edge serrations'. Journal of Sound and Vibration, 332 (24). pp. 6335 - 6358. ISSN: 0022-460X Open Access Link
Tajadura-Jiménez, A., Ajovalasit, M. and Giacomin, J. (2013) 'Editorial'. International Journal of Vehicle Noise and Vibration, 9 (1-2). pp. 1 - 3. ISSN: 1479-1471
Zhou, X. and Li, G. (2013) 'A macro-element based practical model for seismic analysis of steel–concrete composite high-rise buildings'. Engineering Structures, 49. pp. 91 - 103. ISSN: 1873-7323 Open Access Link
Waring, SD., Essah, EA., Gunnell, K. and Bonser, RHC. (2013) 'Double jeopardy: The potential for problems when bats interact with breathable roofing membranes in the United Kingdom'. Architecture and Environment, 1 (1). pp. 1 - 13.
Chong, TP., Vathylakis, A., Joseph, PF. and Gruber, M. (2013) 'Self-noise produced by an airfoil with nonflat plate trailing-edge serrations'. AIAA Journal: devoted to aerospace research and development, 51 (11). pp. 2665 - 2677. ISSN: 0001-1452 Open Access Link
Wu, T. and Cheng, K. (2013) 'Micro milling performance assessment of diamond-like carbon coatings on a micro-end mill'. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 227 (9). pp. 1038 - 1046. ISSN: 1350-6501 Open Access Link
Borsci, S., Macredie, RD., Barnett, J., Martin, J., Kuljis, J. and Young, T. (2013) 'Reviewing and extending the five-user assumption: A grounded procedure for interaction evaluation'. ACM Transactions on Computer-Human Interaction, 20 (5). pp. 1 - 23. ISSN: 1073-0516 Open Access Link
Liu, Y., Zhou, X., Carr, J., Butler, C., Mills, SL., O'Connor, J., et al. (2013) 'Visualisation of conductive filler distributions in polymer composites using voltage and energy contrast imaging in SEM'. Polymer, 54 (1). pp. 330 - 340. ISSN: 0032-3861
Miranda, A., Alba-Baena, N., McKay, BJ., Eskin, DG., Ko, SH. and Shin, JS. (2013) 'Study of Mechanical Properties of an LM24 Composite Alloy Reinforced with Cu-CNT Nanofillers, Processed Using Ultrasonic Cavitation'.6th International Light Metals Technology Conference (LMT 2013). Brunel Univ, BCAST, Old Windsor, ENGLAND. 1 - 26 July. Trans Tech Publications, Ltd.. pp. 245 - 249. ISSN: 0255-5476
Ko, SY., Kim, BY., Kim, YI., Kim, TY., Kim, KT., McKay, BJ. and et al. (2013) 'Manufacture of CNTs-Al Powder Precursors for Casting of CNTs-Al Matrix Composites', in Stone, I., McKay, B. and Fan, ZY. (eds.) Trans Tech Publications, Ltd.. , 765. pp. 353 - 357.
Lu, G., Liu, S. and Lü, K. (2013) 'MBCrawler: A Software Architecture for Micro-Blog Crawler'. Springer Berlin Heidelberg. pp. 119 - 127. ISSN: 1876-1100
Mohimi, A., Richardson, P., Catton, P., Gan, TH., Balachandran, W. and Selcuk, C. (2013) 'High Temperature Dielectric, Elastic and Piezoelectric Coefficients of Shear Type Lithium Niobate Crystals'. Key Engineering Materials, 543. pp. 117 - 120. ISSN: 1013-9826