Chang, ITH., Uzunsoy, D. and Bowen, P. (2001) 'The influence of sintering atmosphere on the microstructure of RAPIDSTEEL 2.0 materials'. Advances in Powder Metallurgy and Particulate Materials. pp. 922 - 931. ISSN: 1042-8860

Jones, E., Stanton, NA. and Harrison, DJ. (2001) 'Applying structured methods to eco-innovation: An evaluation of the product ideas tree diagram'. Design Studies, 22 (6). pp. 519 - 542. ISSN: 0142-694X Open Access Link

Lu, G., Wang, B. and Zhang, T. (2001) 'Taylor impact test for ductile porous materials—Part 1: theory'. International Journal of Impact Engineering, 25 (10). pp. 981 - 991. ISSN: 0734-743X

Li, G., Ding, X., Shen, L. and Zhou, X. (2001) 'Parametric Study on the Limit of Inter-storey Drift Ratio of Steel-Concrete Hybrid High-rise Buildings'.8th National Symposium on Aseismic Design and Technology of High-rise Buildings. Nanning, China. 1 Proceedings of the 8th National Symposium on Aseismic Design and Technology of High-rise Buildings. pp. 14 - 24.

Fang, CM., Metselaar, R., Hintzen, HT. and de With, G. (2001) 'Structure Models for γ‐Aluminum Oxynitride fromAb InitioCalculations'. Journal of the American Ceramic Society, 84 (11). pp. 2633 - 2637. ISSN: 0002-7820

Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2001) 'Effect of heat treatment on filiform corrosion of aluminium alloy AA3005'. Corrosion Science, 43 (11). pp. 2093 - 2109. ISSN: 0010-938X

Martinez-Rubio, MI., Ireland, TG., Fern, G., Silver, J. and Snowden, MJ. (2001) 'A new application for microgels: Novel method for the synthesis of spherical particles of the Y2O3: Eu phosphor using a copolymer microgel of NIPAM and acrylic acid'. Langmuir, 17 (22). pp. 7145 - 7149. ISSN: 0743-7463 Open Access Link

Silver, J., Frampton, CS., Fern, GR., Davies, DA., Miller, JR. and Sosa-Sanchez, JL. (2001) 'Novel seven coordination geometry of Sn(IV): crystal structures of phthalocyaninato bis(undecylcarboxylato)Sn(IV), its Si(IV) analogue, and phthalocyaninato bis(chloro)silicon(IV). The electrochemistry of the Si(IV) analogue and related compounds'. Inorganic Chemistry, 40 (21). pp. 5434 - 5439. ISSN: 0020-1669 Open Access Link

Wang, Y., Rainforth, WM., Jones, H. and Lieblich, M. (2001) 'Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy–Ni3Al powder metallurgy composite'. Wear, 251 (1-12). pp. 1421 - 1432. ISSN: 0043-1648

Bourgeois, L., Mendis, CL., Muddle, BC. and Nie, JF. (2001) 'Characterization of quasicrystalline primary intermetallic particles in Mg?8wt%Zn?4wt%Al casting alloy'. Philosophical Magazine Letters, 81 (10). pp. 709 - 718. ISSN: 0950-0839

Vignjevic, R., Hughes, K., Walker, A. and Taylor, EA. (2001) 'Overcoming element erosion limitations within Lagrangian finite element codes'.3rd European Conference on Space Debris. DARMSTADT, GERMANY. 1 - 21 March. ESA PUBLICATIONS DIVISION C/O ESTEC. pp. 595 - 601. ISSN: 0379-6566

Shepherd, PR., Taylor, C., Evans, PSA. and Harrison, DJ. (2001) 'Measurement and Modelling of MIC Components Using Conductive Lithographic Films'.31st European Microwave Conference, 2001. IEEE. pp. 1 - 4.

Xu, Y. and Mellor, BG. (2001) 'Instrumented impact testing of polymeric materials'.7th Postgraduate Conference in Engineering Materials. Southampton. University of Southampton. pp. 29 - 30.

Xu, YM. and Mellor, BG. (2001) 'The effect of fillers on the wear resistance of thermoplastic polymeric coatings'. Wear, 251 (1-12). pp. 1522 - 1531. ISSN: 0043-1648

Yang, QP. (2001) 'Signal Processing'. Measurement and Control, 34 (8). pp. 228 - 228. ISSN: 0020-2940

Peng, HX. and Fan, Z. (2001) 'Immiscible systems produced by squeeze casting of engineered metallic foams'. Journal of Materials Science Letters, 20 (19). pp. 1769 - 1771. ISSN: 0261-8028

Fan, Z., Bevis, M. and Ji, S. (2001) 'Process and apparatus for manufacturing castings from immiscible metallic liquids'.

Ghobadian, A., Li, R., Gallear, D., Childerhouse, P. and Naim, M. (2001) 'Supply chain performance assessment using data envelopment analysis'. Cardiff, UK. 5 - 7 September. Proceedings of British Academy of Management Annual Conference.

Ghobadian, A., Woo, H., Gallear, D., Viney, H. and Liu, J. (2001) 'An examination of benchmarking in the finance function'. Cardiff, UK. 5 - 7 September. Proceedings of British Academy of Management Annual Conference.

Song, JH., Kang, YG. and Wang, B. (2001) 'Rapid prototyping and tooling for moulded pulp packaging'.17th National Conference on Manufacturing Research. CARDIFF UNIV, CARDIFF, WALES. 4 - 6 September. PROFESSIONAL ENGINEERING PUBLISHING LTD. pp. 193 - 198.

Silver, J., Martinez-Rubio, MI., Ireland, TG. and Withnall, R. (2001) 'Luminescent properties of rare earth-doped photonic crystals'.Quantum Electronics and Photonics 15. Glasgow. 3 - 6 September. Technical Digest.

Silver, J., Ananadan, S., Davies, DA., Fern, GR., Marsh, PJ., Miller, JR., Titler, PJ. and McCammon, CA. et al. (2001) 'High pressure Mossbauer spectroscopic studies of molecular solids. The importance of 'free' space in molecular lattices'.26th International Conference on the Applications of the Mossbauer Effect. OXFORD, ENGLAND. 2 - 7 September. Kluwer Academic Publications. pp. 109 - 117. ISSN: 0304-3843

Kambara, M., Hari Babu, N., Shi, YH. and Cardwell, DA. (2001) 'High temperature phase relationships in (Y,Nd)123 superconducting oxides'. Physica C: Superconductivity, 357-360 (SUPPL. 2). pp. 649 - 653. ISSN: 0921-4534

Aldrich, DE. and Fan, Z. (2001) 'Microstructural characterisation of interpenetrating nickel/alumina composites'. Materials Characterization, 47 (3-4). pp. 167 - 173. ISSN: 1044-5803

Qin, RS. and Fan, Z. (2001) 'Fractal theory study on morphological dependence of viscosity of semisolid slurries'. Materials Science and Technology, 17 (9). pp. 1149 - 1152. ISSN: 0267-0836

Evans, PSA., Harrey, PM., Ramsey, BJ. and Harrison, DJ. (2001) 'Lithographic film circuits – a review'. Circuit World, 27 (3). pp. 31 - 35. ISSN: 0305-6120

Huang, Y. and Humphreys, FJ. (2001) 'Measurements of subgrain growth in a single-phase aluminum alloy by high-resolution EBSD'. Materials Characterization, 47 (3-4). pp. 235 - 240. ISSN: 1044-5803

Campbell, JC. and Shashkov, MJ. (2001) 'A Tensor Artificial Viscosity Using a Mimetic Finite Difference Algorithm'. Journal of Computational Physics, 172 (2). pp. 739 - 765. ISSN: 0021-9991

She, FH., Chow, S., Wang, B. and Kong, LX. (2001) 'Identification and classification of animal fibres using artificial neural networks'. Seni Kikai Gakkai Shi Journal of the Textile Machinery Society of Japan, 54 (9). pp. 60 - 63. ISSN: 0371-0580

Huang, Y. and Humphreys, FJ. (2001) 'The effect of solute elements on grain boundary mobility during recrystallization of single-phase aluminium alloys'.1st Joint International Conference on Recrystallization and grain growth. Aachen, Germany. 27 - 31 August. SPRINGER-VERLAG BERLIN. pp. 409 - 414.

Fang, CM., Hintzen, HT., de Groot, RA. and de With, G. (2001) 'ChemInform Abstract: First‐Principles Electronic Structure Calculations of Ba₅Si₂N₆ with Anomalous Si₂N₆ Dimeric Units.'. ChemInform, 32 (34). ISSN: 0931-7597

Ghobadian, A. and Gallear, D. (2001) 'TQM implementation: An empirical examination and proposed generic model'. Omega - International Journal of Management Science, 29 (4). pp. 343 - 359. ISSN: 0305-0483 Open Access Link

Smith, PJ., Cardwell, DA., Babu, NH., Kambara, M. and Shi, Y-H. (2001) 'Self-seeded melt growth of Au-doped Nd-Ba-Cu-O'. Superconductor Science and Technology, 14 (8). pp. 624 - 630. ISSN: 0953-2048

Bradley, AD., Lo, W., Mironova, M., Babu, NH., Cardwell, DA., Campbell, AM. and Salama, K. et al. (2001) 'Microstructure and growth of joins in melt-textured YBa₂Cu₃O_7−δ'. Journal of Materials Research, 16 (8). pp. 2298 - 2305. ISSN: 0884-2914

Lu, G., Yi, J. and Lü, K. (2001) 'Detecting cumulated anomaly by a dubiety degree based detection model'.Eighth ACIS International Conference on Software Engineering, Artificial Intelligence, Networking, and Parallel/Distributed Computing (SNPD 2007). Haier International Training Center, Qingdao, China. 30 - 1 August. IEEE Xplore. pp. 1034 - 1039.

Zhu, Y. and Lu, K. (2001) 'An effective data placement strategy for XML documents'.18th British National Conference on Databases: Advances in Databases. Chilton, UK. 6 - 11 July. Springer. pp. 43 - 56. ISSN: 0302-9743 Open Access Link

Ji, S. and Fan, Z. (2001) 'Improving the roundness of foundry sands with artificial processing'. International Journal of Cast Metals Research, 14 (1). pp. 37 - 42. ISSN: 1364-0461

Ming Fang, C., de With, G. and Parker, SC. (2001) 'Computer Simulation of Dissociative Adsorption of Water on the Surfaces of Spinel MgAl₂O₄'. Journal of the American Ceramic Society, 84 (7). pp. 1553 - 1558. ISSN: 0002-7820

Qi, K. and Nakayama, K. (2001) 'Structure formation and miscibility of sheets from PBT and LCP blends'. Journal of Materials Science, 36 (13). pp. 3207 - 3213. ISSN: 0022-2461

Fan, Z., Ji, S. and Zhang, J. (2001) 'Processing of immiscible metallic alloys by rheomixing process'. Materials Science and Technology, 17 (7). pp. 837 - 842. ISSN: 0267-0836

Li, G., Ding, X. and Zhou, X. (2001) 'Zone-Based Coupling Analytical Model and Inter-Storey Drift Limits for High-Rise Steel-Concrete Hybrid Structures'.5th China-Japan Symposium on Building Structure Technology. Xi'an, China. 30 Proceedings of the 5th China-Japan Symposium on Building Structure Technology. pp. 317 - 326.

Wang, B., Klepaczko, JR., Lu, G. and Kong, LX. (2001) 'Viscoplastic behaviour of porous bronzes and irons'.5th Asia-Pacific Conference on Materials Processing. SEOUL, SOUTH KOREA. 25 - 27 June. Elsevier BV. pp. 574 - 580. ISSN: 0924-0136

Fang, CM., Hintzen, HT., de Groot, RA. and de With, G. (2001) 'First-principles electronic structure calculations of Ba5Si2N6 with anomalous Si2N6 dimeric units'. Journal of Alloys and Compounds, 322 (1-2). pp. L1 - L4. ISSN: 0925-8388

Liu, YJ., Chang, ITH. and Lees, MR. (2001) 'Influences of oxide phases on the coercivity of mechanically alloyed multicomponent Fe-based amorphous alloys'. Scripta Materialia, 44 (12). pp. 2729 - 2734. ISSN: 1359-6462

Peng, HX., Fan, Z. and Evans, JRG. (2001) 'Bi-continuous metal matrix composites'. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 303 (1-2). pp. 37 - 45. ISSN: 0921-5093

Fan, Z., Ji, S. and Reynolds, A. (2001) 'Metastable effects obtained by intensive shearing of Sn-Pb eutectics.'.International Symposium on Metastable, Mechanically alloyed and Nanocrystalline Materials. St. Catherine’s College, Oxford. [unpublished]

Bonser, RHC. and Farrent, JW. (2001) 'Influence of hydration on the mechanical performance of duck down feathers'. British Poultry Science, 42 (2). pp. 271 - 273. ISSN: 0007-1668

Bonser, RHC. (2001) 'The mechanical performance of medullary foam from feathers'. Journal of Materials Science Letters, 20 (10). pp. 941 - 942. ISSN: 0261-8028

Wang, Y. and Jones, H. (2001) 'Effect of growth velocity on the growth temperature of the Al-AlxFe eutectic in Al-2.85Fe-0.12V alloy'. Metallurgical and Materials Transactions A, 32 (5). pp. 1251 - 1253. ISSN: 1073-5623

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2001) 'Equilibrium pseudobinary Al–Mg₂Si phase diagram'. Materials Science and Technology, 17 (5). pp. 494 - 496. ISSN: 0267-0836

McKay, BJ., Cizek, P., Schumacher, P. and O’Reilly, KAQ. (2001) 'Heterogeneous nucleation in an Al–Ni–Si alloy studied using a metallic glass technique'. Materials Science and Engineering: A, 304-306 (306). pp. 240 - 244. ISSN: 0921-5093