Soua, S., Gan, T-H., Bridge, B., Van Lieshout, P. and Perera, A. (2013) 'Determination of the combined vibrational and acoustic emission signature of a wind turbine gearbox and generator shaft in service as a pre-requisite for effective condition monitoring'. Renewable Energy, 51. pp. 175 - 181. ISSN: 0960-1481 Open Access Link

Fan, Z. (2013) 'An epitaxial model for heterogeneous nucleation on potent substrates'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (3). pp. 1409 - 1418. ISSN: 1073-5623 Open Access Link

McKay, BJ., Cizek, P., Schumacher, P. and O'Reilly, KAQ. (2013) 'Heterogeneous Nucleation of αAl‐Ti in Al‐Ni‐Si Alloys', inEssential Readings in Light Metals. Wiley. , 3. pp. 375 - 380. ISBN 13: 9781118635711.

Zhang, J-S., Sun, Y., Cheng, W-L., Que, Z-P., Li, Y-M. and Liushan, L. (2013) 'The effect of Ca addition on microstructures and mechanical properties of Mg-RE based alloys'. Journal of Alloys and Compounds, 554. pp. 110 - 114. ISSN: 0925-8388

De Vuyst, T. and Vignjevic, R. (2013) 'Total Lagrangian SPH modelling of necking and fracture in electromagnetically driven rings'. International Journal of Fracture, 180 (1). pp. 53 - 70. ISSN: 0376-9429

Nadella, R., Eskin, D. and Katgerman, L. (2013) 'Effect of Grain Refining on Defect Formation in DC Cast Al‐Zn‐Mg‐Cu Alloy Billet', inEssential Readings in Light Metals. Wiley. , 3. pp. 842 - 847. ISBN 13: 9781118635711.

Eskin, DG., Atamanenko, TV., Zhang, L. and Katgerman, L. (2013) 'On the Mechanism of Grain Refinement by Ultrasonic Melt Treatment in the Presence of Transition Metals'. , 3. pp. 415 - 419.

Elsayed, FR., Sasaki, TT., Mendis, CL., Ohkubo, T. and Hono, K. (2013) 'Compositional optimization of Mg–Sn–Al alloys for higher age hardening response'. Materials Science and Engineering: A, 566. pp. 22 - 29. ISSN: 0921-5093

Gegov, E., Postorino, MN., Atherton, M. and Gobet, F. (2013) 'Community structure detection in the evolution of the United States airport network'. Advances in Complex Systems, 16 (1). pp. 1350003 - 1350003. ISSN: 0219-5259 Open Access Link

Yu, Y., Yang, Q., Wang, X. and Wang, J. (2013) 'Optimization of the design of ducted-fan hovering micro air vehicles using finite element simulation and orthogonal design'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (3). pp. 443 - 452. ISSN: 0954-4054 Open Access Link

Ji, S., Yang, W., Jiang, B., Patel, JB. and Fan, Z. (2013) 'Weibull statistical analysis of the effect of melt conditioning on the mechanical properties of AM60 alloy'. Materials Science and Engineering: A, 566. pp. 119 - 125. ISSN: 0921-5093

Holroyd, NJH. and Scamans, GM. (2013) 'Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44A (3). pp. 1230 - 1253. ISSN: 1073-5623 Open Access Link

Ji, S., Yang, W., Gao, F., Watson, D. and Fan, Z. (2013) 'Effect of iron on the microstructure and mechanical property of Al-Mg-Si-Mn and Al-Mg-Si diecast alloys'. Materials Science and Engineering A, 564. pp. 130 - 139. ISSN: 0921-5093 Open Access Link

Zhou, XM., Ghaffar, S., Dong, W., Oladiran, O. and Fan, M. (2013) 'Fracture and impact properties of short discrete jute fibre-reinforced cementitious composites'. Materials and Design, 49. pp. 35 - 47. ISSN: 0261-3069 Open Access Link

Nadendla, HB., Nowak, M. and Bolzoni, L. (2013) 'Grain Refiner for Al‐Si Alloys'. TMS Light Metals. pp. 1009 - 1012. ISSN: 0147-0809

Alba‐Baena, N. and Eskin, D. (2013) 'Kinetics of Ultrasonic Degassing of Aluminum Alloys'. Wiley. pp. 957 - 962. ISSN: 0147-0809

Wiese, B., Mendis, C., Blawert, C., Nyberg, E., Kainer, KU. and Hort, N. (2013) 'A New Magnesium Alloy System: TEXAS'. Wiley. pp. 231 - 235. ISSN: 1545-4150

Mendis, CL., Tolnai, D., Blawert, C. and Hort, N. (2013) 'Effect of Sn Additions on the Age Hardening Response, Microstructures and Corrosion Resistance of Mg‐0.8Ca (wt%) Alloys'. Wiley. pp. 237 - 241. ISSN: 1545-4150

Tolnai, D., Mendis, CL., Stark, A., Szakács, G., Wiese, B., Kainer, KU. and Hort, N. et al. (2013) 'In Situ Synchrotron Diffraction of the Solidification of Mg‐RE Alloys'. Wiley. pp. 253 - 257. ISSN: 1545-4150

Ji, S., Yang, W., Gao, F., Watson, D. and Fan, Z. (2013) 'Effect of Iron in Al‐Mg‐Si‐Mn Ductile Diecast Alloy'. Wiley. pp. 317 - 322. ISSN: 0147-0809

Aggoun, A., Makanjuola, JK., Swash, M., Grange, P., Challacombe, BJ. and Dasgupta, P. (2013) '3D-Holoscopic Imaging: A new Dimension to enhance imaging in minimally invasive therapy in urological oncology'. Journal of Endourology, 27 (5). pp. 535 - 539. ISSN: 0892-7790

Liu, B., Campbell, RI. and Pei, E. (2013) 'Real-time integration of prototypes in the product development process'. Assembly Automation, 33 (1). pp. 22 - 28. ISSN: 0144-5154

He, Q., Ghobadian, A. and Gallear, D. (2013) 'Knowledge acquisition in supply chain partnerships: The role of power'. International Journal of Production Economics, 141 (2). pp. 605 - 618. ISSN: 0925-5273 Open Access Link

Tavakoli, S., Mousavi, A. and Broomhead, P. (2013) 'Event tracking for real-time unaware sensitivity analysis (EventTracker)'. IEEE Transaction on Knowledge and Data Engineering, 25 (2). pp. 348 - 359. ISSN: 1041-4347 Open Access Link

Zuo, YB., Jiang, B., Zhang, YJ. and Fan, Z. (2013) 'Degassing LM25 aluminium alloy by novel degassing technology with intensive melt shearing'. International Journal of Cast Metals Research, 26 (1). pp. 16 - 21. ISSN: 1364-0461

Tarhini, A., Hone, KS. and Liu, X. (2013) 'Factors affecting students’ acceptance of e-learning environments in developing countries:A structural equation modeling approach'. International Journal of Information and Education Technology, 3 (1). pp. 54 - 59. ISSN: 2010-3689 Open Access Link

Wang, C., Rakowski, R. and Cheng, K. (2013) 'Design and analysis of a piezoelectric film embedded smart cutting tool'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (2). pp. 254 - 260. ISSN: 0954-4054 Open Access Link

Wang, C., Ghani, SBC., Cheng, K. and Rakowski, R. (2013) 'Adaptive smart machining based on using constant cutting force and a smart cutting tool'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (2). pp. 249 - 253. ISSN: 0954-4054

Mohib, H., Swash, MR. and Sadka, AH. (2013) 'Multi-view video delivery over wireless networks using HTTP'.2013 1st International Conference on Communications, Signal Processing, and Their Applications (ICCSPA). Amer Univ Sharjah, Sharjah, U ARAB EMIRATES. IEEE. pp. 1 - 5. ISSN: 2377-682X

Simolowo, EO. and Mousavi, A. (2013) 'Developing an Imaging Software for Automated Recycling Processes (Phase 1)'. Advanced Materials Research, 628. pp. 292 - 297. ISSN: 1022-6680

Al Sharif, H. and Grant, S. (2013) 'The Impact of Saudi Arabia’s Culture on HRM Practices within the Public Sector'.The 14th IAMB Conference. San Antonio, Texas, USA,. 21 - 23 January. ISSN: 1949-9108

Pichugin, AV. (2013) 'Topographically guided waves in a thin plate'. Journal of Sound and Vibration, 332 (1). pp. 1 - 6. ISSN: 0022-460X

Tavakoli, S., Mousavi, A. and Poslad, S. (2013) 'Input variable selection in time-critical knowledge integration applications: A review, analysis, and recommendation paper'. Advanced Engineering Informatics: the science of supporting knowledge-intensive activities, 27 (4). pp. 519 - 536. ISSN: 1474-0346 Open Access Link

Lu, X. and Wang, B. (2013) 'On the Strength of Angle-Patterned Sandwich Cores under Various Loading Conditions'. Key Engineering Materials, 535-536. pp. 413 - 417. ISSN: 1013-9826

Zhou, L. and Lu, KJ. (2013) 'Game Theory-based Influence Diagrams'. Expert Systems with Applications, 30 ((4)). pp. 341 - 351. ISSN: 0957-4174

Zhou, X., Li, Z., Fan, M. and Chen, H. (2013) 'Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion'. Cement and Concrete Composites, 37 (1). pp. 304 - 311. ISSN: 1873-393X Open Access Link

Kruse, C. and Maischak, M. (2013) 'Convection Problems on Anisotropic Meshes'. Computational Methods in Applied Mathematics, 13 (1). pp. 55 - 78. ISSN: 1609-4840

Aggoun, A., Tsekleves, E., Swash, MR., Zarpalas, D., Dimou, A., Daras, P., Nunes, P. and Soares, LD. et al. (2013) 'Immersive 3D Holoscopic Video System'. IEEE MultiMedia, 20 (1). pp. 28 - 37. ISSN: 1070-986X

Ji, S., Wang, Y., Watson, D. and Fan, Z. (2013) 'Microstructural evolution and solidification behavior of Al-Mg-Si alloy in high-pressure die casting'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (7). pp. 3185 - 3197. ISSN: 1073-5623 Open Access Link

Wang, B., Chao, X., Li, Y. and Reid, SR. (2013) 'Tensile Strength of Electrospun Poly(ethylene-co-vinyl alcohol) Nanofibre Sheets'. Key Engineering Materials, 535-536. pp. 215 - 218. ISSN: 1013-9826

Dong, W., Wu, Z. and Zhou, X. (2013) 'Calculating crack extension resistance of concrete based on a new crack propagation criterion'. Construction and Building Materials, 38. pp. 879 - 889. ISSN: 0950-0618 Open Access Link

Jones, S., Prasada Rao, AK. and Fan, Z. (2013) 'Melt conditioned direct chill (MC-DC) casting of Al alloys'. Transactions of the Indian Institute of Metals, 66 (2). pp. 117 - 121. ISSN: 0972-2815

Anguilano, L. (2013) 'Under the surface: Silvering in Adrian Athenaeum'. Surface Engineering, 29 (2). pp. 140 - 145. ISSN: 0267-0844

Barrientos, MA. and Maischak, M. (2013) 'A-posteriori error analysis to the exterior Stokes problem'. Applied Numerical Mathematics, 63. pp. 25 - 44. ISSN: 0168-9274

Ceschin, F. (2013) 'Critical factors for implementing and diffusing sustainable product-Service systems: insights from innovation studies and companies' experiences'. Journal of Cleaner Production, 45. pp. 74 - 88. ISSN: 0959-6526 Open Access Link

Ajovalasit, M., Tajadura-Jiménez, A., Shabani, A. and Giacomin, J. (2013) 'Human emotional response to steering wheel vibration in automobiles'. International Journal of Vehicle Noise and Vibration, 9 (1/2). pp. 109 - 128. ISSN: 1479-1471 Open Access Link

Schenker, MC., Pourquié, MJBM., Eskin, DG. and Boersma, BJ. (2013) 'PIV quantification of the flow induced by an ultrasonic horn and numerical modeling of the flow and related processing times'. Ultrasonics Sonochemistry, 20 (1). pp. 502 - 509. ISSN: 1350-4177

Chong, TP., Joseph, PF. and Kingan, MJ. (2013) 'An investigation of airfoil tonal noise at different Reynolds numbers and angles of attack'. Applied Acoustics, 74 (1). pp. 38 - 48. ISSN: 0003-682X

Mohimi, A., Richardson, P., Catton, P., Gan, TH., Balachandran, W. and Selcuk, C. (2013) 'High Temperature Dielectric, Elastic and Piezoelectric Coefficients of Shear Type Lithium Niobate Crystals'. Key Engineering Materials, 543. pp. 117 - 120. ISSN: 1013-9826