Stangeland, A., MO, A., Nielsen, Ø., M’Hamdi, M. and Eskin, D. (2004) 'Development of thermal strain in the coherent mushy zone during solidification of aluminum alloys'. Metallurgical and Materials Transactions A, 35 (9). pp. 2903 - 2915. ISSN: 1073-5623

Giacomin, J., Abdullah, S., Yates, JR. and Choi, JC. (2004) 'An experimental validation of the fatigue damaging events extracted using the wavelet bump extraction (WBE) algorithm'.12th International Conference on Experimental Mechanics (ICEM12). Politecnico di Bari, Italy. 29 - 2 September. European Association for Experimental Mechanics.Open Access Link

Frias-Martinez, E., Magoulas, G., Chen, S. and Macredie, R. (2004) 'Recent soft computing approaches to user modeling in adaptive hypermedia'.3rd International Conference on Adaptive Hypermedia and Adaptive Web-Based Systems. Eindhoven, Netherlands. 23 - 26 August. Springer Berlin Heidelberg. pp. 104 - 114. ISSN: 0302-9743

Bonser, RHC., Deaton, KE., Bishop, CM. and Butler, PJ. (2004) 'The effect of impaired thyroid function during development on the mechanical properties of avian bone'. Journal of Experimental Zoology Part A: Comparative Experimental Biology, 301A (8). pp. 636 - 641. ISSN: 1548-8969

Bate, PS., Huang, Y. and Humphreys, FJ. (2004) 'Development of the “brass” texture component during the hot deformation of Al–6Cu–0.4Zr'. Acta Materialia, 52 (14). pp. 4281 - 4289. ISSN: 1359-6454

Eskin, GI. and Eskin, DG. (2004) 'Some control mechanisms of spatial solidification in light alloys'. International Journal of Materials Research, 95 (8). pp. 682 - 690. ISSN: 1862-5282 Open Access Link

Smith, DR. (2004) 'Radiation Damage in Charge Coupled Devices'. PhD Thesis.

Huang, Y., Ridley, N. and Humphreys, FJ. (2004) 'Evolution of microstructure during the hot plane strain compression of an as-cast Al-Cu-Zr alloy'.Euro-SPF 04. Albi, France. 14 - 15 July.

Ma, X., Soh, AK. and Wang, B. (2004) 'A design database for moulded pulp packaging structure'. Packaging Technology and Science, 17 (4). pp. 193 - 204. ISSN: 0894-3214

Cantor, B., Chang, ITH., Knight, P. and Vincent, AJB. (2004) 'Microstructural development in equiatomic multicomponent alloys'. Materials Science and Engineering: A, 375-377 (1-2 SPEC. ISS.). pp. 213 - 218. ISSN: 0921-5093

Liu, YJ. and Chang, ITH. (2004) 'Effects of oxide phases on thermomagnetisation of mechanically alloyed amorphous Fe–(Co, Ni)–Zr–B powder'. Materials Science and Engineering: A, 375-377 (1-2 SPEC. ISS.). pp. 1092 - 1096. ISSN: 0921-5093

Chang, ITH. and Ren, Z. (2004) 'Simple processing method and characterisation of nanosized metal powders'. Materials Science and Engineering: A, 375-377 (1-2 SPEC. ISS.). pp. 66 - 71. ISSN: 0921-5093

Smit, MA., Hunter, JA., Sharman, JDB., Scamans, GM. and Sykes, JM. (2004) 'Effects of thermal and mechanical treatments on a titanium-based conversion coating for aluminium alloys'. Corrosion Science, 46 (7). pp. 1713 - 1727. ISSN: 0010-938X

Purnell, P., Gan, TH., Hutchins, DA. and Berriman, J. (2004) 'Noncontact ultrasonic diagnostics in concrete: A preliminary investigation'. Cement and Concrete Research, 34 (7). pp. 1185 - 1188. ISSN: 0008-8846

Jones, N., Harrison, D., Hussein, H., Billett, E. and Chiodo, J. (2004) 'Electrically self-powered active disassembly'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 (7). pp. 689 - 697. ISSN: 0954-4054

Ivanov, A., Dimov, S., Pham, DT. and Popov, K. (2004) 'Micromilling strategies: optimization issues'. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 218. pp. 731 - 736.

Giacomin, J. and Woo, YJ. (2004) 'Beyond comfort: Information content and perception enhancement'. Engineering Integrity, 16 (1). pp. 8 - 16. ISSN: 1365-4101 Open Access Link

Mikhailov, SE. and Namestnikova, IV. (2004) 'Local and non-local normalised equivalent strain functionals for cyclic fatigue'.7th International Conference on Biaxial/Multiaxial Fatigue and Fracture. Berlin, Germany. 28 - 1 July.Open Access Link

Gallear, D. and Ghobadian, A. (2004) 'An examination of current and future purchaser-supplier relationship characteristics: evidence from the UK'. Fontainebleau, France. 27 - 29 June. Proceedings of European Operations Management Association Annual Conference.

Smith, DR., Holland, AD., Hutchinson, I., Abbey, AF., Pool, P., Burt, D. and Morris, D. et al. (2004) 'Low noise charge injection in the CCD22'.Conference on High-Energy Detectors in Astronomy. Glasgow, Scotland. 22 - 23 June. SPIE. pp. 189 - 196. ISSN: 0277-786X Open Access Link

Ivanov, A., Pham, DT., Dimov, S. and Popov, K. (2004) 'Micro-EDM - recent developments and research issues'. Journal of Materials Processing Technology, 149 (1-3). pp. 50 - 57. ISSN: 0924-0136

Silver, J., Fern, GR., Withnall, R. and Lipman, AL. (2004) 'A novel synthetic process for producing small particle printable FED phosphors'.Photonics Focus. Centre Point, London. 2  [unpublished]

S. Morar, S. and D. Macredie, R. (2004) 'Special issue on ‘Interacting with desktop virtual environments: Perception and navigation’'. Virtual Reality, 7 (3-4). pp. 129 - 130. ISSN: 1359-4338

Giacomin, J., Shayaa, MS., Dormegnie, E. and Richard, L. (2004) 'Frequency weighting for the evaluation of steering wheel rotational vibration'. International Journal of Industrial Ergonomics, 33 (6). pp. 527 - 541. ISSN: 0169-8141 Open Access Link

Morar, S. and Macredie, R. (2004) 'Usability issues of desktop virtual environment applications'. Virtual Reality, 7 (3-4). pp. 175 - 176. ISSN: 1359-4338

Li, Z., Zhou, X. and Shen, B. (2004) 'Fiber-cement extrudates with perlite subjected to high temperatures'. Journal of Materials in Civil Engineering ASCE, 16 (3). pp. 221 - 229. ISSN: 0899-1561

Fulong, Y., Yongfeng, G., Yingchun, L., Yongda, Y., Honggang, F., Kai, C. and Xichun, L. et al. (2004) 'Micro-fabrication of crystalline silicon by controlled alkali etching'. Elsevier BV. pp. 567 - 572. ISSN: 0924-0136

Silver, J., Ireland, TG., Withnall, R., Fern, GR. and Sancho, D. (2004) 'Investigation of spherical particles of (Y2-(X+Y)Gdx)O3:Euy3+ (where x = 0.02 to 0.4, y = 0.04) and cubic Y2O3:Eu3+ for low voltage applications'.Royal Society of Chemistry. Burlington House. 18 [unpublished]

Fang, CM. and Wijs, GAD. (2004) 'Lattice vibrations and thermal properties of carbon nitride with defect ZnS structure from first-principles calculations'. Journal of Physics: Condensed Matter, 16 (18). pp. 3027 - 3034. ISSN: 0953-8984

Purnell, P., Hutchins, D., Berriman, J. and Gan, TH. (2004) 'Testing without touching: Advances in ultrasonic concrete interrogation'. Concrete London, 38 (5). pp. 10 - 11. ISSN: 0010-5317

Kazilas, MC. and Partridge, IK. (2004) 'Temperature modulated dielectric analysis (TMDA): a new experimental technique for the separation of temperature and reaction effects in dielectric cure monitoring signals'. Measurement Science and Technology, 15 (5). pp. L1 - L4. ISSN: 0957-0233

Fang, CM. and Metselaar, R. (2004) 'First-principles calculations of the stability and local structure of  -sialon ceramics on the line Si₃N₄–½Ca₃N₂:3AlN'. Journal of Physics: Condensed Matter, 16 (16). pp. 2931 - 2939. ISSN: 0953-8984

Ballin, D., Earnshaw, RE., Macredie, RD., Vince, JA. and Notarmarco, CS. (2004) 'Online First publication'. Virtual Reality, 7 (2). pp. 65 - 65. ISSN: 1359-4338

Eskin, DG., Katgerman, L., Suyitno. and Mooney, JF. (2004) 'Contraction of aluminum alloys during and after solidification'. Metallurgical and Materials Transactions A, 35 (4). pp. 1325 - 1335. ISSN: 1073-5623

Bonser, RHC., Saker, L. and Jeronimidis, G. (2004) 'Toughness anisotropy in feather keratin'. Journal of Materials Science, 39 (8). pp. 2895 - 2896. ISSN: 0022-2461

Gili, E., Kunz, VD., de Groot, CH., Uchino, T., Ashburn, P., Donaghy, DC., Hall, S., Wang, Y. and Hemment, PLF. et al. (2004) 'Single, double and surround gate vertical MOSFETs with reduced parasitic capacitance'. Solid-State Electronics, 48 (4). pp. 511 - 519. ISSN: 0038-1101

McKay, BJ. and Schumacher, P. (2004) 'An investigative study of si poisoning in al-si alloys using the metallic glass technique'.Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 157 - 166.

Suyitno., Eskin, D. and Katgerman, L. (2004) 'Effect of casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'.TMS Annual Meeting. Charlotte. 14 - 18 March. TMS. pp. 47 - 52.

Yoon, JW., Cardoso, RP., Wang, SP. and Choudry, S. (2004) 'A General Purpose One Point Quadrature Shell Element Based on Resultant-Stress'.NUMIFORM'04, 8th International Conference on Numerical Methods in Industrial Forming Processes.

Alves de Sousa, RJ., Cardoso, RP., Fontes Valente, RA., Yoon, JW., Gracio, JJ. and Natal Jorge, RM. (2004) 'Development of a One Point Quadrature EAS Solid-Shell Element'.NUMIFORM'04, 8th International Conference on Numerical Methods in Industrial Forming Processes.

Hutchings, IM., Adachi, K., Xu, Y., Sánchez, E. and Ibáñez, MJ. (2004) 'Laboratory simulation of the industrial ceramic tile polishing process [Simulación a escala de laboratorio del proceso de pulido industrial de baldosas cerámicas]'.8th World Congress on Ceramic Tile Quality (Qualicer '04). Castellon, Spain. 7 - 10 March. Camara Oficial de Comercio. pp. 19 - 30.

Abdullah, S., Giacomin, JA. and Yates, JR. (2004) 'A mission synthesis algorithm for fatigue damage analysis'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 218 (3). pp. 243 - 258. ISSN: 0954-4070 Open Access Link

Davis, G., Read, A., Bulson, H., Harrison, D. and Billett, E. (2004) 'Open windrow composting of polymers: An investigation into the rate of degradation of polyethylene'. Resource Conservation and Recycling, 40 (4). pp. 343 - 357. ISSN: 0921-3449 Open Access Link

Hintzen, HT., Fang, CM. and de With, G. (2004) 'High-pressure phases of MgSiN 2 from first-principles calculations'. Applied Physics A: Materials Science & Processing, 78 (5). pp. 717 - 719. ISSN: 0947-8396

Huang, Y. (2004) 'In situ observations of microstructural evolution during deformation of Supral 100'. Materials Science Forum, 447-448. pp. 381 - 386. ISSN: 0255-5476

Taylor, AM., Bonser, RHC. and Farrent, JW. (2004) 'The influence of hydration on the tensile and compressive properties of avian keratinous tissues'. Journal of Materials Science, 39 (3). pp. 939 - 942. ISSN: 0022-2461

He, Z., Zhou, X. and Li, Z. (2004) 'New experimental method for studying early-age cracking of cement-based materials'. ACI Materials Journal, 101 (1). pp. 50 - 56. ISSN: 0889-325X

Gallear, D. and Ghobadian, A. (2004) 'Supply chain purchasing strategy'. Logistics and Transport Focus. pp. 52 - 54.

Mishra, AK., Hari Babu, N., He, P., Isfort, D., Chaud, X., Ferendeci, AM., Cardwell, DA., Tournier, R., Mast, D. and Shi, D. et al. (2004) 'Surface resistance measurements of single domain YBa2Cu3Ox'. Physica C: Superconductivity, 402 (3). pp. 277 - 282. ISSN: 0921-4534

Atherton, MA. and Bates, RA. (2004) 'Robust optimization of cardiovascular stents: A comparison of methods'. Engineering Optimization, 36 (2). pp. 207 - 217. ISSN: 0305-215X Open Access Link

Li, LW., Dong, S. and Cheng, K. (2004) '3D surface topography formation in ultra-precision turning'. Journal of Harbin Institute of Technology New Series, 11 (1). pp. 82 - 86. ISSN: 1005-9113