Lu, G., Ong, LS., Wang, B. and Ng, HW. (1994) 'An experimental study on tearing energy in splitting square metal tubes'. International Journal of Mechanical Sciences, 36 (12). pp. 1087 - 1097. ISSN: 0020-7403

Fan, Z. and Miodownik, AP. (1994) 'TEM study of metastable β-phase decomposition in rapidly solidified Ti-6Al-4V alloy'. Journal of Materials Science, 29 (24). pp. 6403 - 6412. ISSN: 0022-2461

Fan, Z. (1994) 'The β→ω transformation during room temperature aging in rapidly solidified Ti-6Al-4V alloy'. Scripta Metallurgica et Materialia, 31 (11). pp. 1519 - 1524. ISSN: 0956-716X

Fan, Z. (1994) 'Observation of β→ω transformation at room temperature in rapidly solidified Ti–7·5Mn–0·5B alloy using transmission electron microscopy'. Materials Science and Technology, 10 (12). pp. 1021 - 1025. ISSN: 0267-0836

Scamans, GM., Creber, DK., Stannard, JH. and Tregenza, JE. (1994) 'Aluminum fuel cell power sources for long range unmanned underwater vehicles'. IEEE Sympsium on Autonomous Underwater Vehicle Technology. pp. 179 - 186.

Mares, C., Surace, G. and Mares, C. (1994) 'Detection of Structural Damage Using a Genetic Algorithm Approach'.PICAST 2-AAC 6 Second Pacific International Aerospace Science and Technology Conference/Sixth Australian Aeronautical Conference. Melbourne, Australia.

Ji, S., Zhang, J., Wan, L. and Yang, G. (1994) 'New Method to Describe the Capability of Reclaimer in Resin Bonded Sand (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1994 (06). pp. 26 - 30. ISSN: 1001-3814

Wang, Y., Lorimer, GW. and Sale, FR. (1994) 'Microstructural development during consolidation of rapidly solidified AlFeVSi powder by VHP, extrusion and rolling'. Scripta Metallurgica et Materialia, 31 (10). pp. 1337 - 1342. ISSN: 0956-716X

Ghobadian, A., Liu, J., Gallear, D. and Woo, H. (1994) 'Practical Considerations for the Implementation of Total Quality Management'. Timisoara. 1 - 3 November. Proceedings of International Symposium on Management.

Ma, W., Ji, S., Zhang, J. and Yang, G. (1994) 'Design consideration for production line using full mould casting (in Chinese)'. China Foundry Equipment and Technology, 1994 (5). pp. 48 - 53. ISSN: 1006-9658

Chang, ITH., Ishii, K. and Cantor, B. (1994) 'Heat treatment of rapidly solidified Fe−Cr−Zr−B alloys'. Journal of Thermal Analysis, 42 (4). pp. 667 - 678. ISSN: 0368-4466

HAICHUNGAO., YANHUO., CHANGMINGFANG., CHANGMINSUN. and YIZHANG. (1994) 'Ionic conduction in oxysulfide glasses for the Li2SB2O3 (LiBr) systems'. Solid State Ionics, 73 (1-2). pp. 99 - 103. ISSN: 0167-2738

Avis, N. and Macredie, R. (1994) 'Problems, possibilities and potential'. Computer Bulletin London, 6 (Ser 4 pt 5). pp. 8 - 9. ISSN: 0010-4531

Ghobadian, A., Liu, J., Bamford, D., Thompson, A., Gallear, D., Case, K. and Newman, ST. et al. (1994) 'A blueprint for introducing Total Quality Management'.10th National Conference on Manufacturing Research - Advances in Manufacturing Technology VIII. LOUGHBOROUGH UNIV TECH, LOUGHBOROUGH, ENGLAND. 5 - 7 September. TAYLOR & FRANCIS LTD. pp. 198 - 202.

Ji, S., Zhang, J., Ma, W. and Yang, G. (1994) 'Moulding Technology in Full Mould Casting (in Chinese)'. China Foundry Equipment and Technology, 1994 (4). pp. 50 - 55. ISSN: 1006-9658

Ma, W., Zhang, J., Ji, S., Gao, J. and Yang, G. (1994) 'An experimental study on several new type sand mixing mechanisms (in Chinese)'. China Foundry Machinery and Technology, 1994 (04). pp. 34 - 39. ISSN: 1006-9658

Ji, S., Zhang, J., Ma, W., Yang, G. and Wang, W. (1994) 'Phenolic/Ester Cold-set process (in Chinese)'. China Foundry Machinery and Technology, 1994 (04). pp. 09 - 14. ISSN: 1006-9658

Ghobadian, A., Liu, J., Gallear, D., Bamford, D. and Thompson, A. (1994) 'The implementation of Total Quality Management: A Blueprint'. London. 18 Proceedings of Technology Transfer and Innovation 1994 Conference.

Whiteman, J. and Warby, M. (1994) 'Taking the trial and error out of thermoformed container design'. British Plastics and Rubber. pp. 4 - 7. ISSN: 0307-6164

Witter, MS., Cuthill, IC. and Bonser, RHC. (1994) 'Experimental investigations of mass-dependent predation risk in the European starling, Sturnus vulgaris'. Animal Behaviour, 48 (1). pp. 201 - 222. ISSN: 0003-3472

Fan, Z. and Tsakiropoulos, P. (1994) 'On the mean internal stresses in two-ductile-phase alloys'. Materials Science and Engineering: A, 184 (1). pp. 57 - 64. ISSN: 0921-5093

Mares, C., Ruotolo, R., Surace, C. and Mares, C. (1994) 'heoretical and Experimental Study of the Dynamic Behaviour of a Double-Cracked Beam'.14th International Modal Analysis Conference. Dearborn, Michigan, USA.

Ruotolo, R., Surace, C. and Mares, C. (1994) 'Theoretical and Experimental Study of the Dynamic Behaviourof a Double-Cracked Beam'.14th International Modal Analysis Conference. USA.

Huang, Z., Huang, C., Ji, S. and Gao, J. (1994) 'A die structure for making motorway safety plate'.

Ji, S. and Gao, J. (1994) 'Insight of SO2 cold box in complex core-making technology (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1994 (03). pp. 14 - 17. ISSN: 1001-3814

Zhang, J., Ji, S. and Yang, G. (1994) 'Present situation and prospects of cold box process in casting production (in Chinese)'. Modern Cast Iron, 1994 (02). pp. 32 - 43. ISSN: 1003-8345

Wang, B. (1994) 'Response of a bent cantilever to an impulsive load applied at its tip normal to its plane'. International Journal of Solids and Structures, 31 (10). pp. 1377 - 1392. ISSN: 0020-7683

Wheeler, MF. and Whiteman, JR. (1994) 'Superconvergence of recovered gradients of discrete time/piecewise linear Galerkin approximations for linear and nonlinear parabolic problems'. Numerical Methods for Partial Differential Equations, 10 (3). pp. 271 - 294. ISSN: 0749-159X

Nolde, E., Kaplunov, J. and Veksler, ND. (1994) 'Asymptotic formulae for the modal resonance of peripheral waves in the scattering of an obliquely incident plane acoustic wave by a cylindrical shell'. Acustica United with Acta Acustica, 80 (3). pp. 280 - 293. ISSN: 1610-1928

Chang, ITH., Ishii, K. and Cantor, B. (1994) 'Heat treatment of rapidly solidified Fe63Cr18Ti4B15'. Materials Science and Engineering: A, 179-180 (PART 1). pp. 416 - 421. ISSN: 0921-5093

Lee, MH., Chang, ITH., Dobson, PJ. and Cantor, B. (1994) 'Microstructural characterization of nanocomposite thin films of AgSiO2, AgZnO and AgSi'. Materials Science and Engineering: A, 179-180 (PART 1). pp. 545 - 551. ISSN: 0921-5093

Macredie, R. and Thomas, P. (1994) 'Foundations for effective computer-based learning'. IEE Colloquium Digest. pp. 4/3. ISSN: 0963-3308

Ji, S., Zhang, J., Xiong, Z., Wan, L. and Gao, J. (1994) 'Levelling valve'.

Yang, Q. and Butler, C. (1994) 'Sensor signal processing using neural networks for a 3-D fibre-optic position sensor'. Elsevier BV. pp. 102 - 109. ISSN: 0924-4247

Yang, Q. and Butler, C. (1994) 'An optical fibre sensor for displacement and surface topography measurement using neural networks'.XIII IMEKO World Congress. Torino, Italy. Proc. of the XIII IMEKO World Congress. pp. 1737 - 1741.

Kennedy, IM., Thomson, E., Atherton, MA. and Rotter, KRG. (1994) 'The use of 3D scanning and surface matching to locate patients undergoing radiotheraphy planning and treatment'.IEE Colloquium on 3D Imaging and Analysis of Depth/Range Images. London , UK. 1 IEEE. pp. 11/1 - 11/8.

Zhang, J., Ji, S., Ma, W. and Yang, G. (1994) 'Progress in Full Mould Technology (in Chinese)'. China Foundry Equipment and Technology, 1994 (1). pp. 41 - 48. ISSN: 1006-9658

Fan, Z., Miodownik, AP., Chandrasekaran, L. and Ward-Close, M. (1994) 'The Young's moduli of in situ Ti/TiB composites obtained by rapid solidification processing'. Journal of Materials Science, 29 (4). pp. 1127 - 1134. ISSN: 0022-2461

Ji, S. and Wang, W. (1994) 'The Performance Comparisons of Chemical Binder Cold-setting Processes (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1994 (01). pp. 1 - 6. ISSN: 1001-3814

Bahai, H. and Esat, II. (1994) 'A hybrid model for analysis of complex stress distribution in threaded connectors'. Computers and Structures, 52 (1). pp. 79 - 93. ISSN: 0045-7949

Bosque, R., Solans, X., Font-Bardia, M., Tramuns, D., Fern, G. and Silver, J. (1994) 'Effects of the nature of the nitrogen donor atom (sp2versus sp3) upon the properties and chemistry of palladated complexes with σ(Pd–Csp2, ferrocene) bonds'. Journal of the Chemical Society. pp. 3039 - 3046. ISSN: 0300-9246

Lawrie, JB. and King, AC. (1994) 'Exact solution to a class of functional difference equations with application to a moving contact line flow'. European Journal of Applied Mathematics, 5 (2). pp. 141 - 157. ISSN: 0956-7925 Open Access Link

Bahai, H. and Esat, II. (1994) 'Study of axial and bending stress concentration factors in screw connectors'. American Society of Mechanical Engineers Petroleum Division Publication PD, 64 (8-3). pp. 753 - 761.

Thomas, P. and Macredie, R. (1994) 'Games and the design of human-computer interfaces'. Educational and Training Technology International, 31 (2). pp. 134 - 142. ISSN: 0954-7304

Atherton, MA., Giovagnoli, A. and Wynn, HP. (1994) 'Using the physics to help design experiments'.IMS Spring Research Conference. USA. IMS Spring Research Conference.

Lawrie, JB. and Abrahams, ID. (1994) 'Acoustic radiation from two opposed semi-infinite coaxial cylindrical waveguides. II: separated ducts'. Wave Motion, 19 (1). pp. 83 - 109. ISSN: 0165-2125

Atherton, MA. (1994) 'Discussion of The nature of quality assurance and statistical methods in BS5750 by Stickly and Winterbottom'. Journal of the Royal Statistical Society: Series D (The Statistician), 43 (3). pp. 360 - 362. ISSN: 0039-0526

Rees, DWA. and Power, RK. (1994) 'Forming limits in a clad steel'. Journal of Materials Processing Technology, 45 (1-4). pp. 571 - 575. ISSN: 0924-0136

Rees, DWA. (1994) 'Equivalence and instability correlations for isotropic and anisotropic sheet plasticity'. Journal of Materials Processing Technology, 40 (1-2). pp. 173 - 194. ISSN: 0924-0136

Shaw, S., Warby, MK., Whiteman, JR., Dawson, C. and Wheeler, MF. (1994) 'Numerical techniques for the treatment of quasistatic viscoelastic stress problems in linear isotropic solids'. Computer Methods in Applied Mechanics and Engineering, 118 (3-4). pp. 211 - 237. ISSN: 0045-7825

Atherton, MA., Kennedy, IM. and Rotter, KRG. (1994) 'Registration of product surfaces using 3D laser scanning'.IMechE/IEE International Conference on Mechatronics. Budapest. IMechE/IEE. pp. 233 - 239.