Atherton, MA., Kennedy, IM. and Rotter, KRG. (1994) 'Registration of product surfaces using 3D laser scanning'.IMechE/IEE International Conference on Mechatronics. Budapest. IMechE/IEE. pp. 233 - 239.

Eskin, DG. and Toropova, LS. (1994) 'Tensile and elastic properties of deformed heterogeneous aluminum alloys at room and elevated temperatures'. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 183 (1-2). pp. L1 - L4. ISSN: 0921-5093

Kharakterova, ML., Eskin, DG. and Toropova, LS. (1994) 'Precipitation hardening in ternary alloys of the Al-Sc-Cu and Al-Sc-Si systems'. Acta Metallurgica et Materialia, 42 (7). pp. 2285 - 2290. ISSN: 0956-7151

Ghobadian, A., Gallear, D., Stainer, A., Liu, J. and Woo, H. (1994) 'Quality Measurement Systems', in Platts, K W., Gregory, M J. and Neely, A D. (eds.) Operations Strategy and Performance. Cambridge : Cambrdige University Press. pp. 551 - 552. ISBN 10: 0-9523575-0X.

Kalganova, T. (1994) 'Development of the decomposition methods for multiple-valued functions and their systems (in Russian)'. Place of publication: Grand of the Foundation of Fundamental Investigations of Republic of Belarus.

Fan, Z., Tsakiropoulos, P. and Miodownik, AP. (1994) 'A generalized law of mixtures'. Journal of Materials Science, 29 (1). pp. 141 - 150. ISSN: 0022-2461

Wang, B., Reid, SR. and Yu, TX. (1993) 'Dynamic failure mechanisms of bent pipes under out-of-plane end loading: on the design safety of high pressure piping systems'. American Society of Mechanical Engineers Paper. pp. 1 - 8. ISSN: 0402-1215

Yu, TX., Reid, SR. and Wang, B. (1993) 'Hardening softening behavior of tubular cantilever beams'.Asia / Pacific symposium on advances in engineering plasticity and its applications. HONG KONG POLYTECH, HONG KONG, HONG KONG. Elsevier BV. pp. 1021 - 1033. ISSN: 0020-7403

Vignjevic, R., Kecman, D. and Sadeghi, MM. (1993) 'Improved compound beam element with non-linear moment-rotation curves for the car side impact and roof crush analysis using DYNA3D program'. American Society of Mechanical Engineers Applied Mechanics Division AMD. pp. 31 - 46. ISSN: 0160-8835

Fan, Z., Miodownik, AP. and Tsakiropoulos, P. (1993) 'Microstructural characterisation of two phase materials'. Materials Science and Technology, 9 (12). pp. 1094 - 1100. ISSN: 0267-0836

Fan, Z. (1993) 'On the young's moduli of Ti6Al4V alloys'. Scripta Metallurgica et Materialia, 29 (11). pp. 1427 - 1432. ISSN: 0956-716X

Fang, CM., Meetsma, A., Wiegers, GA. and Boom, G. (1993) 'Synthesis and crystal structure of F-type erbium sesquisulfide, F-ER2S3'. Journal of Alloys and Compounds, 201 (1-2). pp. 255 - 259. ISSN: 0925-8388

Fan, Z., Tsakiropoulos, P. and Miodownik, AP. (1993) 'Vield strength of two ductile phase alloys'. Materials Science and Technology, 9 (10). pp. 863 - 868. ISSN: 0267-0836

Baber, C. and Hone, KS. (1993) 'Modelling error recovery and repair in automatic speech recognition'. International Journal of Man-Machine Studies, 39 (3). pp. 495 - 515. ISSN: 0020-7373

Bonser, RHC. and Witter, MS. (1993) 'Indentation hardness of the bill keratin of the European starling'. Condor, 95 (3). pp. 736 - 738. ISSN: 0010-5422

Fan, Z. and Miodownik, AP. (1993) 'The deformation behaviour of alloys comprising two ductile phases—II. Applications of the theory'. Acta Metallurgica et Materialia, 41 (8). pp. 2415 - 2423. ISSN: 0956-7151

Fan, Z. and Miodownik, AP. (1993) 'The deformation behaviour of alloys comprising two ductile phases— I. Deformation theory'. Acta Metallurgica et Materialia, 41 (8). pp. 2403 - 2413. ISSN: 0956-7151

Fang, C., Meetsma, A. and Wiegers, GA. (1993) 'Synthesis and Crystal Structure of Er2S3'.XVI IUCr Congress. Beijing, China. 1 - 29 August. International Union of Crystallography (IUCr). pp. c253 - c253. ISSN: 0906-1975 Open Access Link

Chang, ITH. and Cantor, B. (1993) 'Microstructure of pulsed laser irradiated Sn and Ge-50 at.%Sn thin films on Ge single crystal substrates'. Thin Solid Films, 230 (2). pp. 167 - 178. ISSN: 0040-6090

Ji, S. (1993) 'Reclamation of ester hardened Phenolic sand (in Chinese)'. Foundry Engineering, 1993 (3). pp. 23 - 29. ISSN: 1673-3320

Butler, C. and Yang, Q. (1993) 'A fibre-optic 3-D analog probe for component scanning on coordinate-measuring machines'.EUROSENSORS 6. SAN SEBASTIAN, SPAIN. Elsevier BV. pp. 473 - 479. ISSN: 0924-4247

Ji, S. and Yang, G. (1993) 'Comprehensive classifying and coding system for castings (in Chinese)'. China Foundry Machinery, 1993 (2). pp. 18 - 21. ISSN: 1006-9658

Fan, Z. and Miodownik, AP. (1993) 'An empirical approach to strain to fracture of two-ductile-phase alloys'. Scripta Metallurgica et Materialia, 28 (8). pp. 895 - 900. ISSN: 0956-716X

Huang, Y. and Ma, L. (1993) 'Diffusion bonding of superplastic Al alloy LC4'. Acta Metallurgica Sinica Series B Process Metallurgy Miscellaneous, 6 B (2). pp. 116 - 121. ISSN: 1000-9450

Ji, S. and Gao, J. (1993) 'Research progress of gas-hardened chemical binder core-making techniques (in Chinese)'. Foundry Engineering, 1993 (2). pp. 35 - 40. ISSN: 1673-3320

Fan, Z., Tsakiropoulos, P., Smith, PA. and Miodownik, AP. (1993) 'Extension of the Hall-Petch relation to two-ductile-phase alloys'. Philosophical Magazine A, 67 (2). pp. 515 - 531. ISSN: 0141-8610

Yang, Q. and Butler, C. (Accepted) '3D Contact displacement probe'.

Fan, Z. and Miodownik, AP. (1993) 'On the fracture toughness of ?-� titanium alloys'. Journal of Materials Science Letters, 12 (21). pp. 1665 - 1668. ISSN: 0261-8028

Harrison, D., Jaques, M. and Strickland, P. (1993) 'Design by manufacture simulation using a glove input', in Warwick, K., Gray, J. and Roberts, D. (eds.) Virtual reality in engineering. Stevenage, UK : Institution of Electrical Engineers. pp. 91 - 103. ISBN 10: 0-85296-803-5.

ESKIN, DG., TOROPOVA, LS. and FEDOTOV, SG. (1993) 'TENSILE AND ELASTIC PROPERTIES OF DEFORMED BINARY ALUMINUM-ALLOYS WITH 10-20 VOL-PERCENT OF 2ND-PHASE'. RUSSIAN METALLURGY. pp. 122 - 127. ISSN: 0036-0295

Eskin, D., Fedotov, S. and Toropova, LS. (1993) 'Mechanical and elastic properties of deformed binary aluminum alloys containing 10-20 vol.% of second phase'. Izvestiya Akademii Nauk SSSR. Metally. pp. 144 - 150. ISSN: 0568-5303

Kaplunov, JD., Nolde, EV. and Goldenveizer, AL. (1993) 'On Timoshenko-Reissner type theories of plates and shells'. International Journal of Solids and Structures, 30 (5). pp. 675 - 694. ISSN: 0020-7683

HONE, KS. and BABER, C. (1993) 'USING TASK NETWORKS TO MODEL ERROR-CORRECTION DIALOGS FOR AUTOMATIC SPEECH RECOGNITION'.1993 ANNUAL CONF OF THE ERGONOMICS SOC : ERGONOMICS AND ENERGY. EDINBURGH, SCOTLAND. 1 - 16 April. TAYLOR & FRANCIS LTD. pp. 152 - 157.

Harrison, D. and Norton, M. (1993) 'The use and limitations of performance indicators - Annex C'.

Harrison, D. and Norton, M. (1993) 'Peer review and options for improvement - Annex B'.

Rees, DWA. (1993) 'Anisotropic plastic-flow and instability', in Wilshire, B. and Evans, RW. (eds.) Creep and Fracture of Engineering Materials and Structures. INST MATERIALS. pp. 641 - 649. ISBN 10: 0-901716-43-X.

Stolworthy, C. and Rees, DWA. (1993) 'Biaxial flow and fracture in a metal matrix composite'. Key Engineering Materials: Engineered Materials, 86-87. pp. 77 - 84. ISSN: 1662-9795

Lawrie, JB., Abrahams, ID. and Linton, CM. (1993) 'Acoustic radiation from two opposed semi-infinite coaxial cylindrical waveguides. I: overlapping edges'. Wave Motion, 18 (2). pp. 121 - 142. ISSN: 0165-2125

Jiang, X., Chen, Z., Wang, Y. and Zhou, D. (1992) 'The crystalline to quasicrystalline phase transformation in rapidly solidified Al65Cu20Fe15 powder at high pressure and high temperature'. Scripta Metallurgica et Materialia, 27 (10). pp. 1401 - 1406. ISSN: 0956-716X

Rowe, WB., Cheng, K. and Ives, D. (1992) 'An intelligent design system for recessed hydrostatic journal bearings'. Wear, 159 (1). pp. 95 - 105. ISSN: 0043-1648

Fan, Z., Tsakiropoulos, P. and Miodownik, AP. (1992) 'Prediction of Young's modulus of particulate two phase composites'. Materials Science and Technology, 8 (10). pp. 922 - 929. ISSN: 0267-0836

Huang, Y. (1992) 'DIFFUSION BONDING OF SUPERPLASTIC LC4-AI ALLOY'. Acta Metall Sin, 28 (9). pp. 81 - 86.

Yang, Q. and Butler, C. (1992) 'Microprocessor based 3 D optical fibre position sensor for precision dimensional inspection'.4th International Symposium on Dimensional Metrology in Production & Quality Control (ISMQC). Tampere. 8 Proc. the 4th International Symposium on Dimensional Metrology in Production & Quality Control (ISMQC). pp. 270 - 278.

Kaplunov, YD. and Nol'de, EV. (1992) 'Two-parametric asymptotic analysis of dynamic elasticity equations for the case of plate bending'. Prikladnaya Matematika I Mekhanika, 56 (5). pp. 750 - 755. ISSN: 0032-8235

Huang, Y., Cui, J. and Ma, L. (1992) 'Interfacial atomic-reaction model for diffusion bonding of metals'. Acta Metallurgica Sinica Series B Process Metallurgy Miscellaneous, 5 B (4). pp. 268 - 273. ISSN: 1000-9450

Zhang, T., Evans, JRG. and Rees, DWA. (1992) 'The heating effect of electrical resistance strain gauges applied to low thermal conductivity materials'. Strain, 28 (3). pp. 107 - 112. ISSN: 0039-2103

Huang, Y., Cui, JZ. and Ma, L. (1992) 'An investigation of diffusion bonding in aluminum alloys using a Gleeble1500'.International Conference on Physical Simulation. Delft, Netherlands. 8 - 10 June.

Butler, C. and Yang, Q. (1992) 'A smart sensor for precision position measurement'.International Conference on Mechatronics the Integration of Engineering Design. Scotland. 8 Proc. International Conference on Mechatronics the Integration of Engineering Design.

Ji, S., Dai, X. and Wang, W. (1992) 'Investigation on the Binder in Phenolic-Ester Cold-Setting System (in Chinese)'. Adhesion in China, 1992 (2). pp. 11 - 15. ISSN: 1001-5922

Ji, S. and Yang, G. (1992) 'Gas generators to harden the resin-bonded sand system for foundry industry (in Chinese)'. Research Studies On Foundry Equipment, 1992 (1). pp. 36 - 41. ISSN: 1004-6178

Ji, S., Dai, X. and Wang, W. (1992) 'The Study on the Technical Properties of the Ester Cured Phenolic Resin Cold-Setting System and Some Influence Factors (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1992 (2). pp. 3 - 8. ISSN: 1001-3814