El Fakir, O., Das, S., Stone, I., Scamans, G., Fan, Z., Wang, L., Balint, D., Dear, JP. and Lin, J. et al. (2014) 'Solution heat treatment, forming and in-die quenching of a commercial sheet magnesium alloy into a complex-shaped component: experimentation and FE analysis'. Key Engineering Materials, 622-623. pp. 596 - 602. ISSN: 1013-9826 Open Access Link

Kim, JH., Laith, AS. and Chong, TP. (2014) 'Reduction of bluntness-induced vortex shedding noise using plasma actuators'. 20th AIAA Ceas Aeroacoustics Conference.

Patel, JB., Li, H-T., Xia, M., Jones, S., Kumar, S., O'Reilly, K. and Fan, Z. et al. (2014) 'Melt Conditioned Direct Chill Casting (MC-DC) Process for Production of High Quality Aluminium Alloy Billets'.14th International Conference on Aluminium Alloys (ICAA). Trondheim, NORWAY. 1 - 19 June. TRANS TECH PUBLICATIONS LTD. pp. 149 - 154. ISSN: 0255-5476 Open Access Link

Barekar, NS., Das, S. and Fan, ZY. (2014) 'Melt Conditioned Twin Roll Casting (MC-TRC) for Aluminium Alloys'.14th International Conference on Aluminium Alloys (ICAA). Trondheim, NORWAY. 1 - 19 June. Trans Tech Publications, Ltd.. pp. 1115 - 1120. ISSN: 0255-5476

Fern, GR., Silver, J., Coe-Sullivan, S. and Steckel, JS. (2014) 'Red quantum dots under the electron microscope'. Digest of Technical Papers - SID International Symposium, 45 (1). pp. 59 - 62. ISSN: 0097-966X Open Access Link

Yan, F., Ji, SX. and Fan, ZY. (2014) 'Effect of Cu on the microstructure and mechanical properties of diecast Al-Mg2Si-Mg based alloy'. Materials Science Forum, 794-796. pp. 172 - 177. ISSN: 0255-5476 Open Access Link

Yang, HL., Ji, SX., Watson, D., White, M. and Fan, ZY. (2014) 'Microstructure and mechanical properties of ductile aluminium alloy manufactured by recycled materials'. Materials Science Forum, 794-796. pp. 1077 - 1082. ISSN: 0255-5476 Open Access Link

Watson, D., Ji, SX. and Fan, ZY. (2014) 'A super-ductile alloy for the die-casting of aluminium automotive body structural components'. Materials Science Forum, 794-796. pp. 529 - 531. ISSN: 0255-5476 Open Access Link

Ji, SX., Wang, Y., Watson, D. and Fan, ZY. (2014) 'Microstructural characteristics of diecast almgsimn alloy'. Trans Tech Publications. pp. 234 - 239. ISSN: 1022-6680 Open Access Link

Bolzoni, L., Nowak, M. and Hari Babu, N. (2014) 'Effect of casting temperature on grain size of Al-Si alloys refined by a novel grain refiner'.14th International Conference on Aluminium Alloys (ICAA). Trondheim, NORWAY. Trans Tech Publications Ltd. pp. 77 - 82. ISSN: 0255-5476 Open Access Link

Sreekumar, VM., Babu, NH., Eskin, DG. and Fan, Z. (2014) 'Grain refinement efficiency of a new oxide-containing master alloy for aluminium casting alloys'.14th International Conference on Aluminium Alloys (ICAA). Trondheim, NORWAY. Trans Tech Publications Ltd. pp. 155 - 160. ISSN: 0255-5476 Open Access Link

Jiao, F. and Cheng, K. (2014) 'An experimental investigation on micro-milling of polymethyl methacrylate components with nanometric surface roughness'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228 (5). pp. 790 - 796. ISSN: 0954-4054

Yan, F., Kumar, S., McKay, BJ., McKay, BJ. and O'Reilly, KAQ. (2014) 'Effect of Mn on Fe containing phase formation in high purity aluminium'. International Journal of Cast Metals Research, 27 (4). pp. 202 - 206. ISSN: 1364-0461

Li, J. and Huang, Y. (2014) 'Microstructure and mechanical properties of an Mg-3Zn- o.5Zr-5HA nanocomposite processed by ECAE'.6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD). Metz, FRANCE. Institute of Physics Publishing. pp. 012112 - 012112. ISSN: 1757-8981 Open Access Link

Yang, W., Ji, S., Huang, L., Sheng, X., Li, Z. and Wang, M. (2014) 'Initial precipitation and hardening mechanism during non-isothermal aging in an Al-Mg-Si-Cu 6005A alloy'. Materials Characterization, 94. pp. 170 - 177. ISSN: 1044-5803 Open Access Link

Ceschin, F. (2014) 'Sustainable Product-Service Systems: Between Strategic Design and Transition Studies'. Springer International Publishing. ISSN 13: 978-3-319-03794-3 Open Access Link

Ceschin, F., Vezzoli, C. and Zingale, S. (2014) 'An aesthetic for sustainable interactions in Product-Service Systems?', in Vezzoli, C., Kohtala, C., Srinivasan, A., Xin, L., Fusakul, M., Sateesh, D. and Diehl, JC. et al. (eds.) Product-Service System Design for Sustainability. Greenleaf Publishing. pp. 200 - 217. ISBN 13: 978-1-906093-67-9. Open Access Link

Zhou, L. and Fan, ZY. (2014) 'Effect of Free Ti on Grain Refinment of Aluminium Inoculated with Potent TiB₂ Particles'. Materials Science Forum, 790-791. pp. 155 - 160. ISSN: 0255-5476

Balart, MJ., Patel, JB. and Fan, ZY. (2014) 'Grain Refinement of Phosphorus Deoxidised Copper'. Materials Science Forum, 790-791. pp. 161 - 166. ISSN: 0255-5476

Peng, GS., Wang, Y., Xia, MX. and Fan, Z. (2014) 'Interaction between Zr addition and intensive melt shearing on grain refinement of commercial purity magnesium'. Materials Science Forum, 790-791. pp. 167 - 172. ISSN: 0255-5476

Barekar, NS., Das, S., Fan, ZY., Cinderey, R. and Champion, N. (2014) 'Microstructural Evaluation during Melt Conditioned Twin Roll Casting (MC-TRC) of Al-Mg Binary Alloys'. Materials Science Forum, 790-791. pp. 285 - 290. ISSN: 0255-5476

Djan, E., Vadakke Madam, S., Hari Babu, N., Tamayo-Ariztondo, J., Eskin, DG. and Fan, Z. (2014) 'Processing of metal matrix composites under external fields and their application as grain refiner'. TMS Light Metals, 9781118889084. pp. 1401 - 1404. ISSN: 0147-0809 Open Access Link

Mehrara, H., Eskin, D., Lalpoor, M., Petrov, RH. and Katgerman, L. (2014) 'Linear Contraction Behavior of Low-Carbon, Low-Alloy Steels During and After Solidification Using Real-Time Measurements'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45A (March). pp. 1445 - 1456.Open Access Link

Chong, TP. and Zhong, S. (2014) 'Errata to: “On the shear stress and thermal footprints of turbulent spots at zero pressure gradient”'. Journal of Mechanical Science and Technology, 28 (1). pp. 413 - 413. ISSN: 1738-494X

Serpieri, R., Varricchio, L., Sacco, E. and Alfano, G. (2014) 'Bond-slip analysis via a cohesive-zone model simulating damage, friction and interlocking'. Frattura ed Integrita Strutturale, 8 (29). pp. 284 - 292. ISSN: 1971-8993 Open Access Link

Swash, MR., Abdulfatah, O., Alazawi, E., Kalganova, T. and Cosmas, J. (2014) 'Adopting multiview pixel mapping for enhancing quality of holoscopic 3D scene in parallax barriers based holoscopic 3D displays'.2014 IEEE International Symposium on Broadband Multimedia Systems and Broadcasting (BMSB). Beijing, PEOPLES R CHINA. 1 - 27 June. IEEE. pp. 1 - 4. ISSN: 2155-5044 Open Access Link

Jimenez, JA., Soua, S., Romero, A. and Gan, TH. (2014) 'Development of acoustic emission signature for the assessment of wind turbine drive train'. 11th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM 2014 Mfpt 2014.

Moustakidis, S., Kappatos, V., Karlsson, P., Selcuk, C., Gan, TH. and Hrissagis, K. (2014) 'An Intelligent Methodology for Railways Monitoring Using Ultrasonic Guided Waves'. Journal of Nondestructive Evaluation, 33 (4). pp. 694 - 710. ISSN: 0195-9298

Rafael, S., Romero, A., Soua, S., Gan, TH. and Neasham, J. (2014) 'Detection of gearbox failures by combined acoustic emission and vibration sensing in rotating machinery'. 11th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM 2014 Mfpt 2014.

Artigao, E., Ferrando, JL., Wang, B., Kappatos, V., Selcuk, C. and Gan, TH. (2014) 'Development of a baseline as a novel strategy for a condition monitoring system for the assessment of wind turbine generators'. 11th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM 2014 Mfpt 2014.

Kalinin, V., Stopps, A., Chacon, JF., Artigao, E., Kappatos, V., Selcuk, C., Gan, TH., Lekou, D. and Ruiz, AG. et al. (2014) 'Novel torque sensor design and enhanced envelope method of acoustic emission signals in condition monitoring of the nacelle in wind turbines'. 11th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM 2014 Mfpt 2014.

Musuva, M. and Mares, C. (2014) 'Dynamic analysis of functionally graded materials using the wavelet finite element method'. Proceedings of ISMA 2014 International Conference on Noise and Vibration Engineering and Usd 2014 International Conference on Uncertainty in Structural Dynamics. pp. 2151 - 2164.

Xia, MX., Li, JG. and Fan, ZY. (2014) 'Grain Refining through Semisolid Processing'. Trans Tech Publications, Ltd.. pp. 431 - 435. ISSN: 1012-0394

Yasseri, R., Yasseri, S. and Wang, B. (2014) 'Integrity of subsea control umbilical'.ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. San Francisco, CA. American Society of Mechanical Engineers (ASME).Open Access Link

Breda, C., Dehouche, Z., Tahhan, A., Anson, T. and Fern, GR. (2014) 'Titanium Dioxide Nanoparticles for Enhanced Monocrystalline Solar Cell'.40th IEEE Photovoltaic Specialists Conference (PVSC). Denver, CO. 1 - 13 June. IEEE. pp. 1299 - 1304.Open Access Link

Ramm, S., Giacomin, J., Robertson, D. and Malizia, A. (2014) 'A first approach to understanding and measuring naturalness in driver-car interaction'.AutomotiveUI '14: 6th International Conference on Automotive User Interfaces and Interactive Vehicular Applications. ACM. pp. 1 - 10.Open Access Link

Gallear, D., Ghobadian, A., Li, Y., O'Regan, N., Childerhouse, P. and Naim, M. (2014) 'An environmental uncertainty-based diagnostic reference tool for evaluating the performance of supply chain value streams'. Production Planning and Control, 25 (13-14). pp. 1182 - 1197. ISSN: 0953-7287 Open Access Link

Akyürek, E., Huynh, A. and Kalganova, T. (2014) 'Control of an Asymmetrical Design of a Pneumatically Actuated Ambidextrous Robot Hand'. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 8 (5). ISSN: 1307-5179 Open Access Link

Muhandiram, J., Wang, B. and Chizari, M. (2014) 'Effect of cyclic loading on the temporomandibular joint'. Lecture Notes in Engineering and Computer Science. pp. 655 - 658. ISSN: 2078-0958

Alazawi, E., Cosmas, J., Swash, MR., Abbod, M. and Fatah, OA. (2014) '3D-Interactive-depth generation and object segmentation from Holoscopic image'.2014 IEEE International Symposium on Broadband Multimedia Systems and Broadcasting (BMSB). Beijing, PEOPLES R CHINA. IEEE Computer Society. pp. 1 - 5. ISSN: 2155-5044 Open Access Link

Li, J., Wang, B., Airashidi, M. and Chizari, M. (2014) 'Motion investigation of a tendon graft's limbs using video tracing measurement'. Lecture Notes in Engineering and Computer Science. pp. 608 - 611. ISSN: 2078-0958

Li, B., Wang, S., Wu, X. and Wang, B. (2014) 'Dynamic response of continuous beams with discrete viscoelastic supports under sinusoidal loading'. International Journal of Mechanical Sciences, 86. pp. 76 - 82. ISSN: 0020-7403 Open Access Link

Vorozhtsov, S., Eskin, D., Vorozhtsov, A. and Kulkov, S. (2014) 'Physico-mechanical and electrical properties of aluminum-based composite materials with carbon nanoparticles'. Minerals, Metals and Materials Society. pp. 1373 - 1377. ISSN: 0147-0809 Open Access Link

Eskin, DG. (2014) 'Mechanisms and control of macrosegregation in DC casting'. Minerals, Metals and Materials Society. pp. 855 - 860. ISSN: 0147-0809 Open Access Link

Yamaguchi, K., Sasaki, C., Tsuboi, R., Atherton, M., Stolarski, T. and Sasaki, S. (2014) 'Effect of surface roughness on friction behaviour of steel under boundary lubrication'. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228 (9). pp. 1015 - 1019. ISSN: 1350-6501 Open Access Link

Wenyi Liu. and Qingping Yang. (2014) 'A Novel Notation Method for the Representation of Quantized Sampled Data in Measurement Systems'.IET & ISA 60th International Instrumentation Symposium 2014. Institution of Engineering and Technology. pp. 3.2.3 - 3.2.3. ISSN: 1558-8041

Obeid, O., Alfano, G. and Bahai, H. (2014) 'Analysis of the Temperature Evolution during Lined Pipe Welding'. Advanced Materials Research, 1016. pp. 753 - 757. ISSN: 1022-6680

Cashell, KA. and Baddoo, NR. (2014) 'Ferritic stainless steels in structural applications'. Thin-Walled Structures, 83. pp. 169 - 181. ISSN: 0263-8231 Open Access Link

Wang, HH. and Yang, QP. (2014) 'Theoretical Framework for Innovation Design with Optimised Customization'. Applied Mechanics and Materials, 599-601. pp. 2206 - 2209. ISSN: 1660-9336

Alazawi, E., Abbod, M., Aggoun, A., Swash, MR., Fatah, OA. and Fernandez, J. (2014) 'Super depth-map rendering by converting holoscopic viewpoint to perspective projection'.2014 3DTV-Conference: The True Vision - Capture, Transmission and Display of 3D Video (3DTV-CON 2014). Budapest, HUNGARY. IEEE Computer Society. pp. 1 - 4. ISSN: 2161-2021 Open Access Link

Bourlakis, M., Maglaras, G., Gallear, D. and Fotopoulos, C. (2014) 'Examining sustainability performance in the supply chain: The case of the Greek dairy sector'. Industrial Marketing Management, 43 (1). pp. 56 - 66. ISSN: 0019-8501