Hamdi, M., Mousavi, A. and Sarhadi, M. (2005) 'An intelligent decision and management support tool'.3rd European Conference on Intelligent Management Systems in Operations. University of Salford, UK. 5 - 6 July. [unpublished]

Grant, SB. (2005) 'Supply chain restructuring in UK aerospace'. Marketing Management Journal, 15 (2). pp. 158 - 164. ISSN: 1534-973X

Eskin, DG., Savran, VI. and Katgerman, L. (2005) 'Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy'. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 36A (7). pp. 1965 - 1976. ISSN: 1073-5623

Chong, TP. and Zhong, S. (2005) 'On the Three-Dimensional Structure of Turbulent Spots'. Journal of Turbomachinery, 127 (3). pp. 545 - 551. ISSN: 0889-504X

Kazilas, MC. and Partridge, IK. (2005) 'Exploring equivalence of information from dielectric and calorimetric measurements of thermoset cure—a model for the relationship between curing temperature, degree of cure and electrical impedance'. Polymer, 46 (16). pp. 5868 - 5878. ISSN: 0032-3861

Shen, Y., Perry, MA., Kaymak, E., Atherton, MA., Bates, RA. and Wynn, HP. (2005) 'Experimental and bond graph based sensitivity calculations for micro-scale robust engineering design'.7th REM Conference. Annecy, France. 30 - 1 July. IEEE.Open Access Link

Bigot, S., Ivanov, A. and Popov, K. (2005) 'A study of the micro EDM electrode wear'.1st Multi-Material Micro Manufacture. Kurstruhe, Germany. 29 - 1 July. Elsevier.

Dimov, SS., Pham, DT., Ivanov, A. and Popov, K. (2005) 'Micromilling of thin features'.4M 2005: First International Conference on Multi-Material Micro Manufacture. Forschungszentrum Karlsruhe, Karlsruhe, Germany. 29 - 1 July. Elsevier Science.

Gandarias, E., Dimov, SS., Pham, DT., Ivanov, A., Popov, K., Lizarralde, R. and Arrazola, PJ. et al. (2005) 'New methods for tool failure detection in micro-milling'.4M 2005: First International Conference on Multi-Material Micro Manufacture. Forschungszentrum Karlsruhe, Karlsruhe, Germany. 29 - 1 July. Elsevier Science.

Uriarte, L., Ivanov, A., Oosterling, H., Staemmler, L., Torben, P. and Allen, D. (2005) 'A comparison between microfabrication technologies for metal tooling'.4M 2005: First International Conference on Multi-Material Micro Manufacture. Forschungszentrum Karlsruhe, Karlsruhe, Germany. 29 - 1 July. Elsevier Science.

Choi, Y., Holland, R. and Boult, J. (2005) 'An investigation into current thinking and models of inter-disciplinary communication between designers and general managers'.International Workshop on Exploring Complexity in Collaborative Design and Solutions. London, UK. 23 - 24 June. [unpublished]

Du, Q., Eskin, DG. and Katgerman, L. (2005) 'The effect of ramping casting speed and casting temperature on temperature distribution and melt flow patterns in the sump of a DC cast billet'.International Conference on Advances in Solidification Processes. Stockholm, SWEDEN. 7 - 10 June. Elsevier BV. pp. 144 - 150. ISSN: 0921-5093

Turchin, AN., Eskin, DG. and Katgerman, L. (2005) 'Effect of melt flow on macro- and microstructure evolution during solidification of an Al-4.5% Cu alloy'.International Conference on Advances in Solidification Processes. Stockholm, SWEDEN. 7 - 10 June. Elsevier BV. pp. 98 - 104. ISSN: 0921-5093

Giacomin, J. and Fustes, F. (2005) 'Subjective equivalence of steering wheel vibration and sound'. International Journal of Industrial Ergonomics, 35 (6). pp. 517 - 526. ISSN: 0169-8141 Open Access Link

NADENDLA., Shi, Yunhua., Iida, Kazumasa. and Cardwell, David A. (2005) 'A practical route for the fabrication of large single-crystal (RE)–Ba–Cu–O superconductors'. Nature Materials, 4 (6). pp. 476 - 480. ISSN: 1476-1122

Holland, R. and Ariyatum, B. (2005) 'A multi-disciplinary and multi-cultural learning environment for design management master educations'.The EPSRC/AHRB International Workshop on Exploring Complexity in Collaborative Design and Solutions. London, UK. [unpublished]

Fan, ZT. and Ji, S. (2005) 'Low pressure lost foam process for casting magnesium alloys'. Materials Science and Technology, 21 (6). pp. 727 - 734. ISSN: 1316-2012

HariBabu, N., Reddy, ES., Shi, Y., Iida, K., Withnell, TD. and Cardwell, DA. (2005) 'Large Single Grain (RE)-Ba-Cu-O Superconductors With Nano-Phase Inclusions'. IEEE Transactions on Appiled Superconductivity, 15 (2). pp. 3090 - 3093. ISSN: 1051-8223

Withnell, TD., Babu, NH., Majoros, M., Reddy, ES., Astill, DM., Shi, Y., Cardwell, DA., Campbell, AM., Kerley, N. and Zhang, S. et al. (2005) 'Trapped Field in Individual and Stacked Rings of Bulk Melt Processed Y-Ba-Cu-O'. IEEE Transactions on Appiled Superconductivity, 15 (2). pp. 3125 - 3128. ISSN: 1051-8223

Haindl, S., Eisterer, M., Weber, HW., HariBabu, N. and Cardwell, DA. (2005) 'Grain Boundaries in Multi-Seeded Melt-Grown Superconductors'. IEEE Transactions on Appiled Superconductivity, 15 (2). pp. 3129 - 3132. ISSN: 1051-8223

Li, Z., Chau, CK. and Zhou, X. (2005) 'Accelerated Assessment and Fuzzy Evaluation of Concrete Durability'. Journal of Materials in Civil Engineering, 17 (3). pp. 257 - 263. ISSN: 0899-1561

Van Der Laag, NJ., Fang, CM., De With, G., De Wijs, GA. and Brongersma, HH. (2005) 'Geometry of {001} Surfaces of Spinel (MgAl₂O₄): First‐Principles Simulations and Experimental Measurements'. Journal of the American Ceramic Society, 88 (6). pp. 1544 - 1548. ISSN: 0002-7820

Haobo, C., Yingwei, W., Zhijing, F. and Kai, C. (2005) 'Surface roughness and removal rate in magnetorheological finishing of a subsurface damage free surface'. Progress in Natural Science, 15 (6). pp. 538 - 544. ISSN: 1002-0071

Withnall, R., Silver, J., Barrett, E., Fern, GR. and Ray, B. (2005) 'Wavelength tunable emission from II-VI phosphors excited by electron or UV light for display applications'.Digest of Technical Papers - SID International Symposium 2006. Hynes Convention Center, Boston, Massachusetts, USA. 26 Society for Information Display. pp. 1420 - 1423. ISSN: 0097-966X Open Access Link

Silver, J., Withnall, R., Marsh, PJ., Lipman, A., Ireland, T. and Fern, GR. (2005) 'A new oxide/oxysulfide based phosphor triad and high-efficiency green-emitting (Y,Gd)2O2S: Tb phosphor for FED applications'.Digest of Technical Papers - SID International Symposium. Hynes Convention Center, Boston, Massachusetts, USA. 24 Society for Information Display. pp. 594 - 597. ISSN: 0097-966X Open Access Link

Cardoso, RP., Yoon, JW., Fontes Valente, RA., Gracio, JJ., Simoes, F. and Alves de Sousa, RJ. (2005) 'A Nonlinear Kinematic Hardening Model for the Simulation of Cyclic Loading Paths in Anisotropic Aluminum Alloy Sheets'.

Giacomin, J. (2005) 'Absorbed power of small children'. Clinical Biomechanics, 20 (4). pp. 372 - 380. ISSN: 0268-0033 Open Access Link

Ajovalasit, M. and Giacomin, J. (2005) 'Human subjective response to steering wheel vibration caused by diesel engine idle'. Proceedings of the Institute of Mechanical Engineers, Part D: Journal of Automotive Engineering, 219 (4). pp. 499 - 510. ISSN: 0954-4070 Open Access Link

Iida, K., Babu, NH., Shi, Y-H. and Cardwell, DA. (2005) 'The effect of the addition of zirconium-containing compounds on the microstructure and superconducting properties of mono-domain Y–Ba–Cu–O bulk superconductors'. Superconductor Science and Technology, 18 (5). pp. 704 - 709. ISSN: 0953-2048

Salleh, MR., Yang, QP. and Jones, B. (2005) 'Finite element modeling and simulation of probe system'.IEEE Instrumentation and Measurement Technology Conference. Ottawa. Conference Record - IEEE Instrumentation and Measurement Technology Conference. pp. 849 - 852. ISSN: 1091-5281 Open Access Link

Giacomin, J. and Woo, Y-J. (2005) 'Schwingungsdynamik des Lenksystems'. ATZ - Automobiltechnische Zeitschrift, 107 (5). pp. 422 - 429. ISSN: 0001-2785

Ho, KS., Gan, TH., Billson, DR. and Hutchins, DA. (2005) 'Application of pulse compression signal processing techniques to electromagnetic acoustic transducers for noncontact thickness measurements and imaging'. Review of Scientific Instruments, 76 (5). ISSN: 0034-6748

Kalganova, T., Adedoyin, S., Fernando, WAC. and Kodikara Arachchi, H. (2005) 'An Efficient Motion Estimation Algorithm for H.264 Based Conversational Video Codecs'.WPMC'05. Aalborg, Denmark. TIB/UB Hannover. pp. 1370 - 1374.Open Access Link

Zong, WJ., Li, D., Sun, T., Cheng, K. and Liang, YC. (2005) 'Machine vibration influence on lapping quality of ultra-precision diamond cutting tools'. Hangkong Xuebao Acta Aeronautica Et Astronautica Sinica, 26 (3). pp. 367 - 370. ISSN: 1000-6893

Ji, S., Qian, M. and Fan, Z. (2005) 'Solidification microstructure and mechanical properties of AM series Mg-alloys processed by rheo-diecasting'.Solidification Processing 2007. Sheffield. Proceedings of the 5th decennial international conference on solidification processing. pp. 605 - 609.

Withnall, R., Silver, J., Wilstead, N., Ireland, TG., Fern, GR., Klein, D., Bishton, S. and Rhodes, B. et al. (2005) 'The use of a novel phosphor screen for visualising the infrared beam of a gas detector'.Opto-Ireland 2005 Conference. Dublin, Ireland. 5 - 6 April. SPIE. pp. 425 - 436. ISSN: 0277-786X

Silver, J., Withnall, R., Rose, J., Wilstead, N., Fern, G., Bishton, S., Klein, D., Rhodes, B., Barclay, C. and Whitmarsh, J. et al. (2005) 'Broad-band green phosphor screens as a light source for head up displays in moving platforms'.Opto-Ireland 2005 Conference. Dublin, Ireland. 5 - 6 April. SPIE. pp. 537 - 544. ISSN: 0277-786X

Suyitno., Eskin, DG. and Katgerman, L. (2005) 'Thermal contraction of AA5182 for prediction of ingot distortions'.6th International Conference on Fracture and Strength of Solids. Bali, INDONESIA. 4 - 6 April. TRANS TECH PUBLICATIONS LTD. pp. 977 - 982. ISSN: 1013-9826

Shi, Y., Babu, NH. and Cardwell, DA. (2005) 'Development of a generic seed crystal for the fabrication of large grain (RE)–Ba–Cu–O bulk superconductors'. Superconductor Science and Technology, 18 (4). pp. L13 - L16. ISSN: 0953-2048

Holland, R. and Ariyatum, B. (2005) 'Developing a multi-cultural learning environment for design management education'.10th Network of International Business Schools (NIBS) Conference: Multicultural Management in Education. Rennes, France. [unpublished]

Zhang, E. and Wang, B. (2005) 'On the compressive behaviour of sintered porous coppers with low to medium porosities—Part I: Experimental study'. International Journal of Mechanical Sciences, 47 (4-5). pp. 744 - 756. ISSN: 0020-7403

Bonser, R. (2005) 'A design for life'. Materials World, 13 (4). pp. 21. ISSN: 0967-8638

Waite, AM., Lloyd, NS., Osman, K., Zhang, W., Ernst, T., Achard, H., Wang, Y., Deleonibus, S., Hemment, PLF., Bagnall, DM., Evans, AGR. and Ashburn, P. et al. (2005) 'Raised source/drains for 50nm MOSFETs using a silane/dichlorosilane mixture for selective epitaxy'. Solid-State Electronics, 49 (4). pp. 529 - 534. ISSN: 0038-1101

ElMubarek, HAW., Karunaratne, M., Bonar, JM., Dilliway, GD., Wang, Y., Hemment, PLF., Willoughby, AF. and Ashburn, P. et al. (2005) 'Effect of Fluorine Implantation Dose on Boron Transient Enhanced Diffusion and Boron Thermal Diffusion in Si<tex>$_1-x$</tex>Ge<tex>$_x$</tex>'. IEEE Transactions on Electron Devices, 52 (4). pp. 518 - 526. ISSN: 0018-9383

Kazilas, MC., Skordos †, AA. and Partridge, IK. (2005) 'Parameter estimation in equivalent circuit analysis of dielectric cure monitoring signals using genetic algorithms'. Inverse Problems in Science and Engineering, 13 (2). pp. 157 - 176. ISSN: 1741-5977

Li, D., Wang, HX., Zong, WJ., Cheng, K. and Li, FY. (2005) 'Numerical simulation for elastic recovery of ultra-precision machined surface of OFHC copper'. Transactions of Nonferrous Metals Society of China English Edition. pp. 199 - 203. ISSN: 1003-6326

Mikhailov, SE. and Namestnikova, IV. (2005) 'Application of damage mechanics in percussive drilling modelling'.11th International Conference on Fracture. Turin, Italy. 20 - 25 March. 11th International Conference on Fracture 2005 Icf11. pp. 444 - 451.Open Access Link

Parente, MPL., Fontes Valente, RA., Natal Jorge, RM., Cardoso, RP. and Alves de Sousa, RJ. (2005) 'Fully-Integrated EAS-Based Solid-Shell Finite Elements in Implicit Sheet Metal Forming Simulations'.NUMISHEET2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes.

Alves de Sousa, RJ., Cardoso, RP., Fontes Valente, RA., Yoon, JW., Gracio, JJ. and Natal Jorge, RM. (2005) 'Development of a One Point Quadrature EAS Solid-Shell Element for Sheet Forming Processes'.NUMISHEET2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes.

Cardoso, RP. and Yoon, JW. (2005) 'One Point Quadrature Shell Element With Through-Thickness Stretch'.NUMISHEET2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes.