Kogo, B. and Wang, B. (2015) 'Monitoring hydrate safety margin using freezing point method'. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering OMAE.

Fang, C., Lu, X., Buijs, W., Fan, Z., Genceli Güner, FE., van Huis, MA., Witkamp, G-J. and Vlugt, TJH. et al. (2015) 'Crystal structure, stability, and electronic properties of hydrated metal sulfates MSO4(H2O) (M=Ni, Mg; n=6, 7) and their mixed phases: A first principles study'. Chemical Engineering Science, 121. pp. 77 - 86. ISSN: 0009-2509

Dong, W., Zhou, XM. and Wu, ZM. (2015) 'Estimating the degree of restraint in a restrained elliptical ring test'. Civil Comp Proceedings. ISSN: 1759-3433

Mehrabani, MB., Zhou, X., Chen, HP. and Xiao, Z. (2015) 'A finite element model for simulation of the structural behaviour of steel fibre reinforced concrete ground slabs'. Civil Comp Proceedings. ISSN: 1759-3433

Lau, ET., Yang, Q., Forbes, A. and Livina, V. (2015) 'Application of Ensemble Kalman Filter in Forecasting the Electricity Grid Carbon Factor'. International Journal of Electrical Energy, 3 (4). ISSN: 2301-3656

Szabo, I., Sun, J., Kappatos, V., Selcuk, C. and Gan, TH. (2015) 'X-ray enclosure design and prototype for non-destructive testing of net shape parts from particulate materials'. Proceedings Euro Pm 2015 International Power Metallurgy Congress and Exhibition.

Sun, J., Szabo, I., Livadas, M., Kappatos, V., Selcuk, C. and Gan, TH. (2015) 'Automatic defect detection of powder metallurgy (pm) parts using three dimensional x-ray computed tomography images'. Proceedings Euro Pm 2015 International Power Metallurgy Congress and Exhibition.

Tang, JL., Rafael, S., Mares, C., Soua, S. and Gan, TH. (2015) 'Analysis of fatigue induced crack propagation in a wind turbine blade using acoustic emission'. Shmii 2015 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure.

Balart, M., Patel, J., Gao, F. and Fan, Z. (2015) 'Effects of casting temperature and microalloying elements on the grain structure of DHP copper'.24th International Conference on Metallurgy and Materials. Brno, CZECH REPUBLIC. 1 - 5 June. TANGER LTD. pp. 1376 - 1381.

Yu, Z., Huang, Y., Mendis, CL., Hort, N. and Meng, J. (2015) 'Microstructural evolution and mechanical properties of Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr alloy prepared via pre-ageing and hot extrusion'. Materials Science and Engineering: A, 624. pp. 23 - 31. ISSN: 0921-5093

Katsarou, L., Suresh, K., Rao, KP., Hort, N., Blawert, C., Mendis, CL. and Dieringa, H. et al. (2015) 'Microstructure and Properties of Magnesium Alloy Mg-1Zn-1Ca (ZX11)'. Springer International Publishing. pp. 419 - 423. ISSN: 1545-4150

Maier, P., Mendis, C., Wolff, M., Müller, S. and Hort, N. (2015) 'Twinning Assisted Crack Propagation of Magnesium-Rare Earth Casting and Wrought Alloys under Bending'. Trans Tech Publications, Ltd.. pp. 311 - 317. ISSN: 0255-5476

Stüpp, CA., Mendis, CL., Mohedano, M., Szakács, G., Gensch, F., Müller, S., Feyerabend, F., Hotza, D., Fredel, MC. and Hort, N. et al. (2015) 'Powder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical Applications'. Trans Tech Publications, Ltd.. pp. 165 - 171. ISSN: 0255-5476

Earij, A. and Alfano, G. (2015) 'Three-Dimensional nonlinear Finite-Element modelling of the flexural behaviour of reinforced concrete beams'. Civil Comp Proceedings. ISSN: 1759-3433

Gustafson-Pearce, O. and Grant, SB. (2015) 'The Use of Virtual Environments for Knowledge Sharing in Distance Learning Education, with a View to Informing Industry'. International Journal of Knowledge and Systems Science, 6 (3). pp. 38 - 51. ISSN: 1947-8208

De Coster, R. and McEwen, C. (2015) 'The Commercialisation and Adoption of Emerging Technologies', inAdvances in Business Strategy and Competitive Advantage. IGI Global. pp. 227 - 255.

Kogia, M., Cheng, L., Mohimi, A., Kappatos, V., Gan, T-H., Balachandran, W. and Selcuk, C. et al. (2015) 'Electromagnetic Acoustic Transducers Applied to High Temperature Plates for Potential Use in the Solar Thermal Industry'. Applied Sciences, 5 (4). pp. 1715 - 1734.

Que, ZP., Wang, Y., Zhou, YP., Liu, L. and Fan, Z. (2015) 'Effect of Al-5Ti-1B Grain Refiner Addition on the Formation of Intermetallic Compounds in Al-Mg-Si-Mn-Fe Alloys'. Trans Tech Publications, Ltd.. pp. 53 - 57. ISSN: 0255-5476

Li, HT., Patel, JB., Kotadia, HR. and Fan, Z. (2015) 'Controlling the formation of iron-bearing intermetallics in wrought al alloys by melt conditioned dc (MC-Dc) casting technology'. Trans Tech Publications, Ltd.. pp. 43 - 47. ISSN: 0255-5476 Open Access Link

Dieringa, H., Das, S., Eskin, D., Fan, ZY., Katsarou, L., Horstmann, M., Kurz, G., Mendis, C., Hort, N. and Kainer, KU. et al. (2015) 'Twin-Roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiC'. Trans Tech Publications, Ltd.. pp. 35 - 40. ISSN: 0255-5476

Eskin, DG. (2015) 'Ultrasonic melt processing: Achievements and challenges'. Trans Tech Publications, Ltd.. pp. 112 - 118. ISSN: 0255-5476 Open Access Link

Sreekumar, VM., Hari Babu, N., Eskin, DG. and Fan, Z. (2015) 'Development of new oxide based master alloys and their grain refinement potency in aluminium alloys'. Trans Tech Publications, Ltd.. pp. 23 - 28. ISSN: 0255-5476 Open Access Link

Kostan, M., Cheng, L., Carpentier, C., Nageswaran, C., Mohimi, A., Kappatos, V., Gan, TH., Wrobel, L. and Selcuk, C. et al. (2015) 'Development of phased array probes to operate in time-of-flight diffraction configuration to continuously monitor defect growth in thermal power plants'. 54th Annual British Conference of Non-Destructive Testing, NDT 2015.Open Access Link

Earij, A. and Alfano, G. (2015) 'Three-dimensional nonlinear finite-element modelling of the flexural behaviour of reinforced concrete beams'. Civil-Comp Proceedings. ISSN: 1759-3433

Romero, A., Angulo, Á., Soua, S. and Gan, TH. (2015) 'Vestas V90-3MW wind turbine rotating machinery health assessment using an advanced condition monitoring system'. European Wind Energy Association Annual Conference and Exhibition 2015 Ewea 2015 Scientific Proceedings.

Silver, J., Fathullah, ALM., Stone, R., Fern, GR., Ireland, TG. and Frampton, CS. (2015) 'The synthesis, characterisation and potential of Eu3+ doped molybdate phosphors for white light emitting diodes'. Proceedings of the International Display Workshops. pp. 841 - 844. ISSN: 1883-2490

Stüpp, CA., Szakács, G., Mendis, CL., Gensch, F., Müller, S., Feyerabend, F., Hotza, D., Fredel, MC. and Hort, N. et al. (2015) 'Powder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical Applications', inMagnesium Technology 2015. Springer International Publishing. pp. 425 - 429. ISBN 13: 9783319486116.

Muhandiram, J., Wang, B. and Chizari, M. (2015) 'Dynamic Simulation of the Temporomandibular Joint', inTransactions on Engineering Technologies. Springer Netherlands. pp. 697 - 705. ISBN 13: 9789401798037.

Tanwilaisiri, A., Xu, YM., Harrison, D., Fyson, J., Zhang, RR. and Inc, DP. (2015) 'A Novel Manufacturing Process for Energy Storage Device Using the Combined Techniques of 3D Printing and Ink-jet Printing'. INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND ENERGY ENGINEERING (PEEE 2015). pp. 76 - 79.

Setchi, R. and Grant, S. (2015) 'Special Issue on Knowledge Management for Sustainability'. INTERNATIONAL JOURNAL OF KNOWLEDGE AND SYSTEMS SCIENCE, 6 (3). pp. IV - V. ISSN: 1947-8208

Den Engelsen, D., Silver, J., Ireland, TG., Fern, GR. and Harris, PG. (2015) 'Photoluminescence study of symmetry-related transitions in the spectrum of Y2O3:Tb3+'. Proceedings of the International Display Workshops. pp. 869 - 872. ISSN: 1883-2490

Serpieri, R., Albarella, M., Alfano, G. and Sacco, E. (2015) 'A 3D multiscale cohesive zone models accounting for friction, damage and interlocking'.20th International Conference on Composite Materials (ICCM). Copenhagen, DENMARK. 1 - 24 July. AALBORG UNIV PRESS.

Silver, J., Dhillon, R., Engelsen, DD., Fern, GR., Ireland, TG., Hudry, D. and Dickerson, JH. et al. (2015) 'By understanding how light emission depends on size, morphology and phase in inorganic phosphor materials, can we deduce properties to design efficient nanostructures for tomorrows industrial needs'. Proceedings of the International Display Workshops. pp. 1603 - 1606. ISSN: 1883-2490

Silver, J., Li, R., Fern, GR., Bishop, P. and Thiebaut, B. (2015) 'Coating ZnO: Zn nanoparticles with alumina for polymer protection'. Proceedings of the International Display Workshops. pp. 722 - 725. ISSN: 1883-2490

Muhandiram, J., Pierson, J., Wang, B. and Chizari, M. (2015) 'An investigation on stiffness of the temporomandibular joint under cyclical loading'. Lecture Notes in Engineering and Computer Science. pp. 582 - 585. ISSN: 2078-0958

Paknejad, SA., Mansourian, A., Noh, Y., Khtatba, K., Van Parijs, L. and Mannan, SH. (2015) 'Factors influencing microstructural evolution in nanoparticle sintered Ag die attach'. Imaps International Conference on High Temperature Electronics Network Hiten 2015. pp. 50 - 58.

Back, J., Karim, R., Noh, Y., Rhode, K., Althoefer, K. and Liu, H. (2015) 'Tension Sensing for a Linear Actuated Catheter Robot'.8th International Conference on Intelligent Robotics and Applications (ICIRA). Portsmouth, ENGLAND. Springer International Publishing. pp. 472 - 482. ISSN: 0302-9743

Sadati, SMH., Noh, Y., Elnaz Naghibi, S., Althoefer, K. and Nanayakkara, T. (2015) 'Stiffness Control of Soft Robotic Manipulator for Minimally Invasive Surgery (MIS) Using Scale Jamming'.8th International Conference on Intelligent Robotics and Applications (ICIRA). Portsmouth, ENGLAND. Springer International Publishing. pp. 141 - 151. ISSN: 0302-9743

Fern, GR., Silver, J., Ireland, T., Howkins, A., Hobson, P. and Coe-Sullivan, S. (2015) 'Electron microscopy of Quantum dots for display applications'. Proceedings of the International Display Workshops. pp. 1607 - 1610. ISSN: 1883-2490

Kappatos, V., Gan, TH. and Stamatelos, D. (2015) 'Advances in Communications-Based Train Control Systems', in Yu, FR. (ed.) Advances in Communications Based Train Control Systems. CRC Press. pp. 43 - 64.

Sun, X. and Cheng, K. (2015) 'Micro-/Nano-machining through Mechanical Cutting', inMicromanufacturing Engineering and Technology. Elsevier. pp. 35 - 59. ISBN 13: 9780323311496.

Tarhini, A., Hone, K. and Liu, X. (2014) 'The effects of individual differences on e-learning users' behaviour in developing countries: A structural equation model'. Computers in Human Behavior, 41. pp. 153 - 163. ISSN: 0747-5632 Open Access Link

Ceschin, F. (2014) 'How the design of socio-technical experiments can enable radical changes for sustainability'. International Journal of Design, 8 (3). pp. 1 - 21. ISSN: 1991-3761 Open Access Link

Fan, Z., Koster, RS., Wang, S., Fang, C., Yalcin, AO., Tichelaar, FD., Zandbergen, HW., van Huis, MA. and Vlugt, TJH. et al. (2014) 'A transferable force field for CdS-CdSe-PbS-PbSe solid systems'. The Journal of Chemical Physics, 141 (24). ISSN: 0021-9606

Veluscek, M., Kalganova, T., Broomhead, P. and Grichnik, A. (2014) 'Composite Goal Methods for Transportation Network Optimization Expert Systems With Applications'. Expert Systems with Applications, 42 (8). pp. 3852 - 3867. ISSN: 1873-6793 Open Access Link

Samano, A., Xu, Y., Harrison, D., Hunt, C., Wickham, M. and Thomas, O. (2014) 'Third harmonic measurement in printed electronics'.2014 3rd Asia-Pacific Conference on Antennas and Propagation. Institute of Electrical and Electronics Engineers Inc.. pp. 889 - 891. ISSN: 2381-5523 Open Access Link

Erbao Cao., Zhou, X. and Lu, KJ. (2014) 'Coordinating a Supply Chain under Demand and Cost Disruptions'. International Journal of Production Research, 53 (12). pp. 3735 - 3752. ISSN: 0020-7543 Open Access Link

Spieser, A. and Ivanov, A. (2014) 'Design of an electrochemical micromachining machine'. International Journal of Advanced Manufacturing Technology, 78 (5-8). pp. 737 - 752. ISSN: 0268-3768 Open Access Link

Legg, M., Yücel, MK., Kappatos, V., Selcuk, C. and Gan, TH. (2014) 'Increased range of ultrasonic guided wave testing of overhead transmission line cables using dispersion compensation'. Ultrasonics, 62. pp. 35 - 45. ISSN: 0041-624X

Spieser, A. and Ivanov, A. (2014) 'Design of a pulse power supply unit for micro-ECM'. International Journal of Advanced Manufacturing Technology, 78 (1-4). pp. 537 - 547. ISSN: 0268-3768 Open Access Link