IMM
Chankitmunkong, S., Eskin, DG. and Limmaneevichitr, C. (2020) 'Structure refinement, mechanical properties and feasibility of deformation of hypereutectic Al-Fe-Zr and Al-Ni-Zr alloys subjected to ultrasonic melt processing'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 788. pp. 1 - 13. ISSN: 0921-5093 Open Access Link
Werner, A., Angadi, VC., Lentes, J. and Mousavi, A. (2020) 'Vorausschauende Instandhaltung – Wenn der Digitale Schatten an Grenzen stößt: Harmonisierung datengetriebener und physikbasierter Modelle für die vorausschauende Instandhaltung'. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 115 (5). pp. 335 - 339. ISSN: 0947-0085 Open Access Link
Zhang, Y., Lordan, E., Dou, K., Wang, S. and Fan, Z. (2020) 'Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys'. Journal of Manufacturing Processes, 56 (Part A). pp. 500 - 509. ISSN: 1526-6125 Open Access Link
Zhang, K., Zheng, J-H., Huang, Y., Pruncu, C. and Jiang, J. (2020) 'Evolution of twinning and shear bands in magnesium alloys during rolling at room and cryogenic temperature'. Materials and Design, 193 (August 2020). pp. 1 - 11. ISSN: 0264-1275 Open Access Link
Salimian, A., Hasnath, A., Anguilano, L., Onwukwe, U., Aminishahsavarani, A., Sachez, C. and et al. (2020) 'Highly conductive zinc oxide based transparent conductive oxide films prepared using RF plasma sputtering under reducing atmosphere'. Coatings, 10 (5). pp. 1 - 17.Open Access Link
Que, Z. and Mendis, CL. (2020) 'Heterogeneous nucleation and phase transformation of Fe-rich intermetallic compounds in Al–Mg–Si alloys'. Journal of Alloys and Compounds, 836. pp. 1 - 12. ISSN: 0925-8388 Open Access Link
Fang, C. and Fan, Z. (2020) 'Atomic ordering at the interfaces between liquid Al and solid MgO: An Ab Initio molecular dynamics study'. Philosophical Magazine Letters, 100 (5). pp. 235 - 244. ISSN: 0950-0839
Vasilaki, V., Danishvar, S., Mousavi, A. and Katsou, E. (2020) 'Data mining techniques to optimise N2O emissions sampling requirements in the wastewater sector'. Computers and Chemical Engineering. ISSN: 0098-1354
Kazemian, S. and Grant, SB. (2020) 'The challenges of internal social networking for higher education: a brief review of the literature'. Journal of Data, Information and Management, 2 (4). pp. 1 - 17. ISSN: 2524-6356 Open Access Link
Song, L., Cheng, K., Ding, H., Chen, S. and Gao, Q. (2020) 'The static performance of the high-speed aerostatic spindles with modified discharge coefficients'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 0 (Special Issue, ahead of print). pp. 1 - 13. ISSN: 0954-4054
Pei, E. (2020) 'Editorial PIAM April 2020'. Progress in Additive Manufacturing, 5 (2). pp. 83 - 83. ISSN: 2363-9512 Open Access Link
Albar, A., Chougan, M., Al- Kheetan, MJ., Swash, MR. and Ghaffar, SH. (2020) 'Effective extrusion-based 3D printing system design for cementitious-based materials'. Results in Engineering, 6. pp. 1 - 9. ISSN: 2590-1230 Open Access Link
Cao, C., Swash, MR. and Meng, H. (2020) 'Reliable Holoscopic 3D Face Recognition'.2020 7th International Conference on Signal Processing and Integrated Networks (SPIN). Noida, India. 20 - 28 February. IEEE. pp. 696 - 701. ISSN: 2688-7681 Open Access Link
Giannakeas, IN., Papathanasiou, TK., Fallah, AS. and Bahai, H. (2020) 'Coupling XFEM and peridynamics for brittle fracture simulation—part I: feasibility and effectiveness'. Computational Mechanics, 66 (1). pp. 113 - 122. ISSN: 0178-7675 Open Access Link
Chang, I., Luo, D., Al-Helal, K., Patel, JB., Huang, Y., Scamans, G. and et al. (2020) 'Processing of recycled AA6111 aluminium alloy from two different feedstock of aluminium metal scraps'. Keikinzoku Yosetsu/Journal of Light Metal Welding, 58. pp. 29 - 32. ISSN: 0368-5306 Open Access Link
Alnaim, N., Abbod, M. and Swash, R. (2020) 'Recognition of Holoscopic 3D Video Hand Gesture Using Convolutional Neural Networks'. Technologies, 8 (2). pp. 1 - 23.Open Access Link
Silva Campos, MDR., Blawert, C., Mendis, CL., Mohedano, M., Zimmermann, T., Proefrock, D., et al. (2020) 'Effect of Heat Treatment on the Corrosion Behavior of Mg-10Gd Alloy in 0.5% NaCl Solution'. Frontiers in Materials, 7. ISSN: 2296-8016
Wang, S., Wang, Y., Ramasse, Q. and Fan, Z. (2020) 'The Nature of Native MgO in Mg and Its Alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (6). pp. 2957 - 2974. ISSN: 1073-5623 Open Access Link
Hobson, P. and Smith, D. (2020) 'A portable test-bench for real-time radiation damage measurements in scintillating and wavelength-shifting fibres'.IEEE Nuclear Science Symposium. Manchester, UK. 9 - 2 November. IEEE Nuclear Science Symposium Conference Record.Open Access Link
Dzalbs, I. and Kalganova, T. (2020) 'Hybrid 2-stage Imperialist Competitive Algorithm with Ant Colony Optimization for Solving Multi-Depot Vehicle Routing Problem.'. CoRR, abs/2005.04157. ISSN: 2331-8422 Open Access Link
Chougan, M., Hamidreza Ghaffar, S., Jahanzat, M., Albar, A., Mujaddedi, N. and Swash, R. (2020) 'The influence of nano-additives in strengthening mechanical performance of 3D printed multi-binder geopolymer composites'. Construction and Building Materials, 250. pp. 1 - 13. ISSN: 0950-0618 Open Access Link
Li, G., Li, B., Lin, J., Huang, Z. and Pang, Y. (2020) 'Baseline correction algorithm for ECG signals based on improved EWT'. Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument, 41 (4). pp. 156 - 166. ISSN: 0254-3087
Li, X., Wu, Z., Zheng, J., Yu, RC. and Zhou, X. (2020) 'Effect of loading rate on the bond behaviour of plain round bars in concrete subjected to uniaxial lateral tension'. Magazine of Concrete Research, 73 (20). pp. 1033 - 1047. ISSN: 0024-9831
Que, Z., Wang, Y. and Fan, Z. (2020) 'Heterogeneous Nucleation of Eutectic Structure in Al-Mg-Si Alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (6). pp. 2697 - 2702. ISSN: 1073-5623 Open Access Link
Gupta, S., Gallear, D., Rudd, J. and Foroudi, P. (2020) 'The Impact of Brand Value on Brand Competitiveness'. Journal of Business Research, 112. pp. 210 - 222. ISSN: 0148-2963 Open Access Link
Dzalbs, I., Kalganova, T. and Dear, I. (2020) 'Imperialist Competitive Algorithm with Independence and Constrained Assimilation for Solving 0-1 Multidimensional Knapsack Problem.'. CoRR, abs/2003.06617. pp. 1 - 10. ISSN: 2331-8422 Open Access Link
Al-wswasi, M. and Ivanov, A. (2020) 'A features subtraction system for rotational parts based on manufacturing and metal removing concepts'. International Journal of Advanced Manufacturing Technology, 107 (3-4). pp. 1835 - 1857. ISSN: 0268-3768 Open Access Link
Zeng, G., Shuai, SS., Zhu, XZ., Ji, SX., Xian, JW. and Gourlay, CM. (2020) 'Al8Mn5 in High-Pressure Die Cast AZ91: Twinning, Morphology and Size Distributions'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (5). pp. 2523 - 2535. ISSN: 1073-5623 Open Access Link
Lim, Y., Giacomin, J., Yin, Y. and Nickpour, F. (2020) 'A first-time investigation of psychosocial inclusivity in design: Inclusive supermarket design for older individuals'. Journal of Design Research, 17 (2-4). pp. 93 - 124. ISSN: 1748-3050 Open Access Link
Fang, C., Mohammodi, V., Nihtianov, S. and Sluiter, M. (2020) 'Stability, geometry and electronic properties of BHn (n = 0 to 3) radicals on the Si{0 0 1}3×1:H surface from first-principles'. Journal of Physics: Condensed Matter, 32 (23). pp. 1 - 10. ISSN: 0953-8984 Open Access Link
Uka, J., Minton, T., McKay, B., Lewis, R. and Anguilano, L. (2020) 'Methods to Re-Use and Recycle Aluminium Machining Swarf'. Evolutions in Mechanical Engineering, 3 (2). pp. 1 - 4. ISSN: 2640-9690 Open Access Link
Katsou, E., Nika, C-E., Buehler, D., Marić, B., Megyesi, B., Mino, E., et al. (2020) 'Transformation tools enabling the implementation of nature-based solutions for creating a resourceful circular city'. Blue-Green Systems, 2 (1). pp. 188 - 213.Open Access Link
Wei, H., Pan, QX., Adetoro, OB., Avital, E., Yuan, Y. and Wen, PH. (2020) 'Dynamic large deformation analysis of a cantilever beam'. Mathematics and Computers in Simulation, 174. pp. 183 - 204. ISSN: 0378-4754 Open Access Link
Zhou, L. and Zhang, T. (2020) 'Image denoising based on mixed total variation regularization with decision-making scheme'. Multimedia Tools and Applications, 79 (11-12). pp. 7543 - 7557. ISSN: 1380-7501
Wang, YJ., Wu, ZM., Zheng, JJ., Yu, RC. and Zhou, XM. (2020) 'Three-dimensional axisymmetric analytical method for pull-out behaviour of adhesive anchors in concrete'. Engineering Fracture Mechanics, 226. pp. 106876 - 106876. ISSN: 0013-7944
Cashell, K. (2020) 'Editorial'. Proceedings of the Institution of Civil Engineers Structures and Buildings, 173 (3). pp. 157. ISSN: 0965-0911
Yasseri, SF. and Bahai, H. (2020) 'Case studies in estimating subsea systems’ readiness level'. Underwater Technology, 37 (1). pp. 13 - 27. ISSN: 1756-0543 Open Access Link
Luan, Q. and Jiang, J. (Accepted) 'How Would the Deformation Bands Affect Recrystallization in Pure Aluminium?'. SSRN Electronic Journal.
Zhou, M., Cardoso, RP., Bahai, H. and Usmani, A. (2020) 'A thermo-mechanical analysis of stainless steel structures in fire'. Engineering Structures, 210 (1). pp. 1 - 19. ISSN: 0141-0296 Open Access Link
Huang, Y., Swash, MR. and Sadka, A. (2020) 'Real Time Holoscopic 3D Video Interlacing'.2020 7th International Conference on Signal Processing and Integrated Networks (SPIN). IEEE. pp. 692 - 695.Open Access Link
Lou, S., Tang, D., Zeng, W., Zhang, T., Gao, F., Muhamedsalih, H., et al. (2020) 'Application of Clustering Filter for Noise and Outlier Suppression in Optical Measurement of Structured Surfaces'. IEEE Transactions on Instrumentation and Measurement, 69 (9). pp. 6509 - 6517. ISSN: 0018-9456 Open Access Link
Xue, P., Fan, W., Wang, G. and Wang, B. (2020) 'Effects of Loading Angle and Linear Notch on Tensile Properties of Lithium-Ion Battery Separator'. Gaoya Wuli Xuebao/Chinese Journal of High Pressure Physics, 34 (1). pp. 1 - 8. ISSN: 1000-5773 Open Access Link
Subroto, T., Eskin, DG., Beckwith, C., Tzanakis, I., Djambazov, G. and Pericleous, K. (2020) 'Improving Ultrasonic Melt Treatment Efficiency Through Flow Management: Acoustic Pressure Measurements and Numerical Simulations'.149th TMS Annual Meeting and Exhibition: Light Metals 2020 Symposium. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 981 - 987. ISSN: 2367-1181
Venditti, S., Eskin, D. and Jacot, A. (2020) 'Fractional Solidification for Purification of Recycled Aluminium Alloys'.149th TMS Annual Meeting and Exhibition: Light Metals Symposium 2020. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 1110 - 1118. ISSN: 2367-1181
Razavi, M. and Huang, Y. (2020) 'Effect of hydroxyapatite (HA) nanoparticles shape on biodegradation of Mg/HA nanocomposites processed by high shear solidification/equal channel angular extrusion route'. Materials Letters, 267. pp. 1 - 6. ISSN: 0167-577X
Lam, B., Pei, E., Kabir, I. and Godec, D. (2020) 'Innovative Business Models for Additive Manufacturing'.Design 2020. Cavtat, Croatia (virtual). [unpublished]
Khodadadi, A., Liaghat, G., Shahgholian-Ghahfarokhi, D., Chizari, M. and Wang, B. (2020) 'Numerical and experimental investigation of impact on bilayer aluminum-rubber composite plate'. Thin-Walled Structures, 149 (April 2020). pp. 1 - 13. ISSN: 0263-8231 Open Access Link
Zhang, C., Xia, Z., Wang, B., Gao, H., Chen, S., Zong, S. and et al. (2020) 'A Li-ion battery thermal management system combining a heat pipe and thermoelectric cooler'. Energies, 13 (4). pp. 1 - 15. ISSN: 1996-1073 Open Access Link
Lordan, E., Lazaro Nebreda, J., Zhang, Y., Dou, K., Blake, P. and Fan, Z. (2020) 'On the relationship between internal porosity and the tensile ductility of aluminium alloy die-castings'. Materials Science and Engineering A, 778 (19 March 2020). pp. 1 - 10. ISSN: 0921-5093 Open Access Link
Talebizadehsardari, P., Babaei-Mahani, R., Giddings, D., Yasseri, S., Moghimi, MA. and Bahai, H. (2020) 'Energy recovery from domestic radiators using a compact composite metal Foam/PCM latent heat storage'. Journal of Cleaner Production, 257 (1 June 2020). pp. 1 - 12. ISSN: 0959-6526 Open Access Link
Pérez-Prado, MT., Bohlen, J., Yi, S., Letzig, D., Al-Samman, T., Robson, J., et al. (2020) 'Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development'. JOM, 72 (7). pp. 1 - 1. ISSN: 1047-4838