Edmans, BD., Alfano, G. and Bahai, H. (2013) 'Nonlinear multi-scale homogenization with different structural models at different scales'. International Journal for Numerical Methods in Engineering. ISSN: 0029-5981

Que, Z., Lee, J., Cheng, W., Han, S., Jung, H. and Euh, K. (2013) 'Microstructure Evolution of the Cu-Cr Hypereutectic Alloys During Directional Solidification'. Springer Netherlands. pp. 939 - 947. ISSN: 1876-1100

Pavey, J., Penchev, P., Dimov, S., Chang, I., Petkov, P. and Kolew, A. (2013) 'Laser Machining of a Zr-Based Bulk Metallic Glass with Nano-Second Laser'.10th International Conference on Multi-Material Micro Manufacture. Research Publishing Services. pp. 147 - 151.

Chang, I. (2013) 'Plasma synthesis of metal nanopowders', inAdvances in Powder Metallurgy. Elsevier. pp. 69 - 85. ISBN 13: 9780857094209.

Chang, I. and Zhao, Y. (2013) 'Advances in powder metallurgy'. Woodhead Publishing Limited. ISSN 13: 9780857094209

Denkena, B., Stephan, EP., Maischak, M., Heinisch, D. and Andres, M. (2013) 'Numerical Computation Methods for Modeling the Phenomenon of Tool Extraction', inLecture Notes in Production Engineering. Springer Berlin Heidelberg. , Part F1131. pp. 285 - 308. ISBN 13: 9783642324475.

Stone, IC., McKay, BJ. and Fan, Z. (2013) 'Preface'.

Cheng, W-L., Que, Z-P., Zhang, J-S., Xu, C-X., Liang, W., You, BS. and Park, SS. et al. (2013) 'Compressive deformation behavior of an indirect-extruded Mg-8Sn-1Al-1Zn alloy'. International Journal of Minerals, Metallurgy, and Materials, 20 (1). pp. 49 - 56. ISSN: 1674-4799

Al-Helal, K. (2013) 'New Approaches to Casting Hypereutectic Al-Si Alloys to Achieve Simultaneous Refinement of Primary Silicon and Modification of Eutectic Silicon'. PhD Thesis.Open Access Link

Niu, X., Que, Z. and Cheng, W. (2013) 'A New Algorithm for Solving the Energy Conservation Equation Based on ADI Method'. Springer Netherlands. pp. 671 - 677. ISSN: 1876-1100

LI, X., CHEN, J., LIU, C., FENG, J. and WANG, S. (2013) 'EFFECTS OF T6 AND T78 TEMPERS ON THE MICROSTRUCTURES AND PROPERTIES OF Al-Mg-Si-Cu ALLOYS'. Acta Metallurgica Sinica, 49 (2). pp. 243 - 243. ISSN: 0412-1961

Cassell, A., Thompson, GE., Zhou, XR., Hashimoto, T. and Scamans, G. (2013) 'Relating Grain Misorientation to the Corrosion Behaviour of Low Copper 7xxx Aluminium Alloys'. Trans Tech Publications, Ltd.. pp. 623 - 628. ISSN: 0255-5476

Que, ZP., Lee, JH., Jung, HM., Shin, JH., Han, SZ. and Euh, KJ. (2013) 'Microstructure evolution in Cu–1.54wt% Cr alloy during directional solidification'. Journal of Crystal Growth, 362 (1). pp. 58 - 61. ISSN: 0022-0248

Bojie Sheng., Chengke Zhou., Wenjun Zhou., Hepburn, DM., Xiang Dong. and Alkali, B. (2013) 'PD detection and localisation in cross-bonded HV cable systems'.22nd International Conference and Exhibition on Electricity Distribution (CIRED 2013). Institution of Engineering and Technology. pp. 0129 - 0129.

Lockton, D., Cain, R., Harrison, D. and Nicholson, L. (2013) 'CarbonCulture at DECC: Digital Engagement for Sustainability at Work'.27th International BCS Human Computer Interaction Conference (HCI 2013). BCS Learning & Development. ISSN: 1477-9358

Gkatzidou, V., Hone, K., Gibbs, J., Sutcliffe, L., Sadiq, ST., Sonnenberg, P. and Estcourt, C. et al. (2013) 'A user-centred approach to inform the design of a mobile application for STI diagnosis and management'.27th International BCS Human Computer Interaction Conference (HCI 2013). BCS Learning & Development. ISSN: 1477-9358

Hintzsche, LE., Fang, CM., Watts, T., Marsman, M., Jordan, G., Lamers, MWPE., Weeber, AW. and Kresse, G. et al. (2012) 'Density functional theory study of the structural and electronic properties of amorphous silicon nitrides: Si3N4−x:H'. Physical Review B, 86 (23). ISSN: 1098-0121

Shu, SR., Ding, H., Chen, SJ. and Cheng, K. (2012) 'FEM-Based Design and Analysis of a Smart Cutting Tool with Internal Cooling for Cutting Temperature Measurement and Control'. Applied Mechanics and Materials, 217-219. pp. 1874 - 1879. ISSN: 1660-9336

Huo, DH., Cheng, K. and Ding, H. (2012) 'Design and Performance Assessment of a 5-Axis Ultra-Precision Micro-Milling Machine'. Applied Mechanics and Materials, 217-219. pp. 1699 - 1704. ISSN: 1660-9336

Shah, SGS., Barnett, J., Kuljis, J., Hone, K. and Kaczmarski, R. (2012) 'Patients’ experiences with hospital outpatient anticoagulation services: dimensions and determinants'. International Journal of Person Centered Medicine, 2 (4). pp. 669 - 679. ISSN: 2043-7730

Zhou, X. (2012) 'Geopolymer-based Building Products Made by Extrusion'.UK Materials Knowledge Transfer Network Conference on Applications of Geopolymers. Stoke-on-Trent, Staffordshire, UK. 4 - 4 December.

Withnall, R., Fern, G., Yan, X. and Silver, J. (2012) 'Contrasting behaviour of the co-activators in the luminescence spectra of Y2O2S:Tb3+,Er3+ nanometre sized particles under UV and red light excitation'. Nanoscale, 5 (3). pp. 1091 - 1096. ISSN: 2040-3364

Lawrie, JB. (2012) 'Analytic mode-matching for acoustic scattering in three dimensional waveguides with flexible walls: Application to a triangular duct'. Wave Motion, Online Paper (3). pp. 542 - 557. ISSN: 0165-2125 Open Access Link

Wang, Y., Li, H-T. and Fan, Z. (2012) 'Oxidation of Aluminium Alloy Melts and Inoculation by Oxide Particles'. Transactions of the Indian Institute of Metals, 65 (6). pp. 653 - 661. ISSN: 0972-2815

Shah, SGS., Barnett, J., Kuljis, J., Hone, K. and Kaczmarski, R. (2012) 'Factors determining patients’ intentions to use point-of-care testing medical devices for self-monitoring: The case of international normalised ratio self-testing'. Patient Preference and Adherence, 7 (7). pp. 1 - 14. ISSN: 1177-889X Open Access Link

Hou, J., Wright, E., Bonser, RHC. and Jeronimidis, G. (2012) 'Development of biomimetic squid-inspired suckers'. Journal of Bionic Engineering, 9 (4). pp. 484 - 493. ISSN: 1672-6529

Wang, B. and Nesic, D. (2012) 'Semiglobal practical stability of a class of parameterized networked control systems'.2012 IEEE 51st Annual Conference on Decision and Control (CDC). IEEE. pp. 752 - 756. ISSN: 0743-1546

Bhattacharjee, T., Mendis, CL., Sasaki, TT., Ohkubo, T. and Hono, K. (2012) 'Effect of Zr addition on the precipitation in Mg–Zn-based alloy'. Scripta Materialia, 67 (12). pp. 967 - 970. ISSN: 1359-6462

Hou, J., Bonser, RHC. and Jeronimidis, G. (2012) 'Developing tactile sensors for a soft-bodied robot'.2012 IEEE International Conference on Robotics and Biomimetics (ROBIO). Guangzhou, PEOPLES R CHINA. IEEE. pp. 1979 - 1984.

Wang, C., Noh, Y., Terunaga, C., Tokumoto, M., Yusuke, M., Sher, C., Niibori, A., Ishii, H., Takanishi, A., Hatake, K. and Shoji, S. et al. (2012) 'Development of optic nerve and facial nerve models for cranial nerve examination training'.2012 IEEE/SICE International Symposium on System Integration (SII 2012). Kyushu Univ, Fukuoka, JAPAN. IEEE. pp. 492 - 497.

Wang, C., Noh, Y., Terunaga, C., Tokumoto, M., Okuyama, I., Yusuke, M., Ishii, H., Takanishi, A., Hatake, K. and Shoji, S. et al. (2012) 'Development of a face robot for cranial nerves examination training'.2012 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 14 - 19.

Tirumalasetty, GK., Fang, CM., Xu, Q., Jansen, J., Sietsma, J., van Huis, MA. and Zandbergen, HW. et al. (2012) 'Novel ultrafine Fe(C) precipitates strengthen transformation-induced-plasticity steel'. Acta Materialia, 60 (20). pp. 7160 - 7168. ISSN: 1359-6454

Noh, Y., Wang, C., Tokumoto, M., Matsuoka, Y., Chihara, T., Ishii, H., Takanishi, A., Takayama, T. and Shoji, S. et al. (2012) 'Development of the airway Management Training System WKA-5: Improvement of mechanical designs for high-fidelity patient simulation'.2012 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 1224 - 1229.

Santillana, B., Boom, R., Eskin, D., Mizukami, H., Hanao, M. and Kawamoto, M. (2012) 'High-Temperature Mechanical Behavior and Fracture Analysis of a Low-Carbon Steel Related to Cracking'. Metallurgical and Materials Transactions A, 43 (13). pp. 5048 - 5057. ISSN: 1073-5623

Gegov, E., Gegov, A., Gobet, F., Atherton, M., Freudenthal, D. and Pine, J. (2012) 'Cognitive modelling of language acquisition with complex networks', inComputational Intelligence. pp. 95 - 105.

Ursache, N. and Mares, C. (2012) 'Optimisation of a corrugated skin for a morphable winglet'. 53rd AIAA ASME ASCE AHS ASC Structures Structural Dynamics and Materials Conference 2012. ISSN: 0273-4508

Silsilah, HA., Lam, B. and Silve, S. (2012) 'Challenges of integrating Islamic art and culture in commercial brands'. Icdc 2012 2nd International Conference on Design Creativity Proceedings. pp. 375 - 383.

Al-Helal, K., Stone, IC. and Fan, Z. (2012) 'Simultaneous Primary Si Refinement and Eutectic Modification in Hypereutectic Al–Si Alloys'. Transactions of the Indian Institute of Metals, 65 (6). pp. 663 - 667. ISSN: 0972-2815

Bai, Q., He, B., Liang, Y. and Cheng, K. (2012) 'Micro-tensile device and test for micro-wire in MEMS'.18th International Conference on Automation and Computing (ICAC) - Integration of Design and Engineering. Loughborough Univ, Leicestershire, ENGLAND. 26 - 8 September. IEEE. pp. 234 - 237.

Hu, ZQ., Cheng, K. and Feng, ZM. (2012) 'Numerical simulation of the component microstructure change through roll forming'.18th International Conference on Automation and Computing (ICAC) - Integration of Design and Engineering. Loughborough Univ, Leicestershire, ENGLAND. 26 - 8 September. IEEE. pp. 254 - 258.

Rotter, KRG., Jensen, F. and Atherton, MA. (2012) 'Noise suffered by the Autistic: Can Mechatronics Help?'.9th France-Japan and 7th Europe-Asia Congress on Mechatronics (MECATRONICS) / 13th International Workshop on Research and Education in Mechatronics (REM). Supmeca, Paris, FRANCE. 21 - 23 November. IEEE. pp. 219 - 224.

Tahhan, A., Dehouche, Z. and Fern, G. (2012) 'Nanostructured Materials for Silicon Solar Cells Grown by PECVD'.World Congress on Sustainable Technologies (WCST). London, ENGLAND. 19 - 20 November. IEEE. pp. 116 - 116.

Zhang, YJ., Ma, NH., McKay, BJ., Li, XF. and Wang, HW. (2012) 'The Role of Fe on the Grain Refinement of High Purity Aluminium'. Trans Tech Publications, Ltd.. pp. 2264 - 2268. ISSN: 1022-6680

Gulavani, O., Hughes, K. and Vignjevic. (2012) 'COMPUTATIONAL MODELLING TECHNIQUES FOR THE CERTIFICATION OF AN INNOVATIVE AIRCRAFT SEAT AGAINST STATIC COMPLIANCE (CS 25.561)'.Aerospace Structural Impact Dynamics International Conference. Wichita, Kansas. [unpublished]

Gunasekaran, A. and Gallear, D. (2012) 'Special Issue on Sustainable development of manufacturing and services'. International Journal of Production Economics, 140 (1). pp. 1 - 6. ISSN: 0925-5273

Giacomin, J. and Bertola, D. (2012) 'Human emotional response to energy visualisations'. International Journal of Industrial Ergonomics, 42 (6). pp. 542 - 552. ISSN: 0169-8141 Open Access Link

Dowson, M., Poole, A., Harrison, D. and Gideon, S. (2012) 'Domestic UK retrofit challenge: Barriers, incentives and current performance leading into the green deal'. Energy Policy, 50. pp. 294 - 305. ISSN: 0301-4215 Open Access Link

Durrell, JH., Dancer, CEJ., Dennis, A., Shi, Y., Xu, Z., Campbell, AM., Babu, NH., Todd, RI., Grovenor, CRM. and Cardwell, DA. et al. (2012) 'A trapped field of >3 T in bulk MgB₂fabricated by uniaxial hot pressing'. Superconductor Science and Technology, 25 (11). pp. 112002 - 112002. ISSN: 0953-2048

Mousavi, A., Jan, S., Li, M., Al-Raweshidy, H. and Qi, M. (2012) 'Dealing with Uncertain Entities in Ontology Alignment using Rough Sets'. IEEE Transactions on Systems, Man, and Cybernetics - Part C, 42 (6). pp. 1600 - 1612. ISSN: 1094-6977 Open Access Link

MACREDIE, R. (2012) 'The Effects of Individual Differences and Visual Instructional Aids on Disorientation, Learning Performance and Attitudes in a Hypermedia Learning System'. Computers in Human Behaviour, 28 (6). pp. 2182 - 2198. ISSN: 0747-5632

Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (11). pp. 4331 - 4344. ISSN: 1073-5623 Open Access Link