Bonser, RHC., Deaton, KE., Bishop, CM. and Butler, PJ. (2004) 'The effect of impaired thyroid function during development on the mechanical properties of avian bone'. Journal of Experimental Zoology Part A Comparative Experimental Biology, 301 (8). pp. 636 - 641. ISSN: 0022-104X

Eskin, GI. and Eskin, DG. (2004) 'Some control mechanisms of spatial solidification in light alloys'. International Journal of Materials Research, 95 (8). pp. 682 - 690. ISSN: 1862-5282 Open Access Link

Smith, DR. (2004) 'Radiation Damage in Charge Coupled Devices'. PhD Thesis.

Chang, ITH. and Ren, Z. (2004) 'Simple processing method and characterisation of nanosized metal powders'. Materials Science and Engineering A, 375-377 (1-2 SPEC. ISS.). pp. 66 - 71. ISSN: 0921-5093

Liu, YJ. and Chang, ITH. (2004) 'Effects of oxide phases on thermomagnetisation of mechanically alloyed amorphous Fe-(Co, Ni)-Zr-B powder'. Materials Science and Engineering A, 375-377 (1-2 SPEC. ISS.). pp. 1092 - 1096. ISSN: 0921-5093

Cantor, B., Chang, ITH., Knight, P. and Vincent, AJB. (2004) 'Microstructural development in equiatomic multicomponent alloys'. Materials Science and Engineering A, 375-377 (1-2 SPEC. ISS.). pp. 213 - 218. ISSN: 0921-5093

Huang, Y., Ridley, N. and Humphreys, FJ. (2004) 'Evolution of microstructure during the hot plane strain compression of an as-cast Al-Cu-Zr alloy'.Euro-SPF 04. Albi, France. 14 - 15 July.

Purnell, P., Gan, TH., Hutchins, DA. and Berriman, J. (2004) 'Noncontact ultrasonic diagnostics in concrete: A preliminary investigation'. Cement and Concrete Research, 34 (7). pp. 1185 - 1188. ISSN: 0008-8846

Ma, X., Soh, AK. and Wang, B. (2004) 'A design database for moulded pulp packaging structure'. Packaging Technology and Science, 17 (4). pp. 193 - 204. ISSN: 0894-3214

Smit, MA., Hunter, JA., Sharman, JDB., Scamans, GM. and Sykes, JM. (2004) 'Effects of thermal and mechanical treatments on a titanium-based conversion coating for aluminium alloys'. Corrosion Science, 46 (7). pp. 1713 - 1727. ISSN: 0010-938X

Ivanov, A., Dimov, S., Pham, DT. and Popov, K. (2004) 'Micromilling strategies: optimization issues'. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 218. pp. 731 - 736.

Giacomin, J. and Woo, YJ. (2004) 'Beyond comfort: Information content and perception enhancement'. Engineering Integrity, 16 (1). pp. 8 - 16. ISSN: 1365-4101 Open Access Link

Mikhailov, SE. and Namestnikova, IV. (2004) 'Local and non-local normalised equivalent strain functionals for cyclic fatigue'.7th International Conference on Biaxial/Multiaxial Fatigue and Fracture. Berlin, Germany. 28 - 1 July.Open Access Link

Gallear, D. and Ghobadian, A. (2004) 'An examination of current and future purchaser-supplier relationship characteristics: evidence from the UK'. Fontainebleau, France. 27 - 29 June. Proceedings of European Operations Management Association Annual Conference.

Smith, DR., Holland, AD., Hutchinson, I., Abbey, AF., Pool, P., Burt, D. and Morris, D. et al. (2004) 'Low noise charge injection in the CCD22'.Conference on High-Energy Detectors in Astronomy. Glasgow, Scotland. 22 - 23 June. SPIE. pp. 189 - 196. ISSN: 0277-786X Open Access Link

Ivanov, A., Pham, DT., Dimov, S. and Popov, K. (2004) 'Micro-EDM - recent developments and research issues'. Journal of Materials Processing Technology, 149 (1-3). pp. 50 - 57. ISSN: 0924-0136

Fulong, Y., Yongfeng, G., Yingchun, L., Yongda, Y., Honggang, F., Kai, C. and Xichun, L. et al. (2004) 'Micro-fabrication of crystalline silicon by controlled alkali etching'. Elsevier BV. pp. 567 - 572. ISSN: 0924-0136

Silver, J., Fern, GR., Withnall, R. and Lipman, AL. (2004) 'A novel synthetic process for producing small particle printable FED phosphors'.Photonics Focus. Centre Point, London. 2  [unpublished]

Giacomin, J., Shayaa, MS., Dormegnie, E. and Richard, L. (2004) 'Frequency weighting for the evaluation of steering wheel rotational vibration'. International Journal of Industrial Ergonomics, 33 (6). pp. 527 - 541. ISSN: 0169-8141 Open Access Link

Li, Z., Zhou, X. and Shen, B. (2004) 'Fiber-cement extrudates with perlite subjected to high temperatures'. Journal of Materials in Civil Engineering ASCE, 16 (3). pp. 221 - 229. ISSN: 0899-1561

Eskin, DG., Suyitno. and Katgerman, L. (2004) 'Mechanical properties in the semi-solid state and hot tearing of aluminium alloys'. Progress in Materials Science, 49 (5). pp. 629 - 711. ISSN: 0079-6425

Silver, J., Ireland, TG., Withnall, R., Fern, GR. and Sancho, D. (2004) 'Investigation of spherical particles of (Y2-(X+Y)Gdx)O3:Euy3+ (where x = 0.02 to 0.4, y = 0.04) and cubic Y2O3:Eu3+ for low voltage applications'.Royal Society of Chemistry. Burlington House. 18 [unpublished]

Fang, CM. and De Wijs, GA. (2004) 'Lattice vibrations and thermal properties of carbon nitride with defect ZnS structure from first-principles calculations'. Journal of Physics Condensed Matter, 16 (18). pp. 3027 - 3034. ISSN: 0953-8984

Holland, AD., Perryman, M., Vetel, C., Steward, R., Hutchinson, IB., Ambrosi, RM., Smith, DR., Bowring, S., Burt, D., Eaton, T., Morris, D., Pool, P., Davancens, R., Laborie, A., Pouny, P., Safa, F., Zayer, I. and Short, A. et al. (2004) 'Development of the CCDs for ESA's GAIA cornerstone mission'.Optical Science and Technology, SPIE's 48th Annual Meeting. SPIE. pp. 38 - 49. ISSN: 0277-786X

Purnell, P., Hutchins, D., Berriman, J. and Gan, TH. (2004) 'Testing without touching: Advances in ultrasonic concrete interrogation'. Concrete London, 38 (5). pp. 10 - 11. ISSN: 0010-5317

Fang, CM. and Metselaar, R. (2004) 'First-principles calculations of the stability and local structure of α-sialon ceramics on the line Si3N4-1/2Ca 3N2:3AlN'. Journal of Physics Condensed Matter, 16 (16). pp. 2931 - 2939. ISSN: 0953-8984

Bonser, RHC., Saker, L. and Jeronimidis, G. (2004) 'Toughness anisotropy in feather keratin'. Journal of Materials Science, 39 (8). pp. 2895 - 2896. ISSN: 0022-2461

Eskin, DG., Katgerman, L., Suyitno. and Mooney, JF. (2004) 'Contraction of aluminum alloys during and after solidification'. Metallurgical and Materials Transactions A, 35 (4). pp. 1325 - 1335. ISSN: 1073-5623

Gili, E., Kunz, VD., De Groot, CH., Uchino, T., Ashburn, P., Donaghy, DC., Hall, S., Wang, Y. and Hemment, PLF. et al. (2004) 'Single, double and surround gate vertical MOSFETs with reduced parasitic capacitance'. Solid State Electronics, 48 (4). pp. 511 - 519. ISSN: 0038-1101

Ballin, D., Earnshaw, RE., Macredie, RD., Vince, JA. and Notarmarco, CS. (2004) 'Online First publication'. Virtual Reality, 7 (2). pp. 65 - 65. ISSN: 1359-4338

McKay, BJ. and Schumacher, P. (2004) 'An investigative study of si poisoning in al-si alloys using the metallic glass technique'.Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting. Charlotte, NC. 14 - 18 March. MINERALS, METALS & MATERIALS SOC. pp. 157 - 166.

Suyitno., Eskin, D. and Katgerman, L. (2004) 'Effect of casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'.TMS Annual Meeting. Charlotte. 14 - 18 March. TMS. pp. 47 - 52.

Yoon, JW., Cardoso, RP., Wang, SP. and Choudry, S. (2004) 'A General Purpose One Point Quadrature Shell Element Based on Resultant-Stress'.NUMIFORM'04, 8th International Conference on Numerical Methods in Industrial Forming Processes.

Alves de Sousa, RJ., Cardoso, RP., Fontes Valente, RA., Yoon, JW., Gracio, JJ. and Natal Jorge, RM. (2004) 'Development of a One Point Quadrature EAS Solid-Shell Element'.NUMIFORM'04, 8th International Conference on Numerical Methods in Industrial Forming Processes.

Hutchings, IM., Adachi, K., Xu, Y., Sánchez, E. and Ibáñez, MJ. (2004) 'Laboratory simulation of the industrial ceramic tile polishing process [Simulación a escala de laboratorio del proceso de pulido industrial de baldosas cerámicas]'.8th World Congress on Ceramic Tile Quality (Qualicer '04). Castellon, Spain. 7 - 10 March. Camara Oficial de Comercio. pp. 19 - 30.

Ambat, R., Davenport, AJ., Afseth, A. and Scamans, G. (2004) 'Electrochemical Behavior of the Active Surface Layer on Rolled Aluminum Alloy Sheet'. Journal of the Electrochemical Society, 151 (2). pp. B53 - B58. ISSN: 0013-4651

Davis, G., Read, A., Bulson, H., Harrison, D. and Billett, E. (2004) 'Open windrow composting of polymers: An investigation into the rate of degradation of polyethylene'. Resource Conservation and Recycling, 40 (4). pp. 343 - 357. ISSN: 0921-3449 Open Access Link

Abdullah, S., Giacomin, JA. and Yates, JR. (2004) 'A mission synthesis algorithm for fatigue damage analysis'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 218 (3). pp. 243 - 258. ISSN: 0954-4070 Open Access Link

Mishra, AK., Babu, HH., He, P., Isfort, D., Chaud, X., Ferendeci, AM., Cardwell, DA., Tournier, R., Mast, D. and Shi, D. et al. (2004) 'Surface resistance measurements of single domain YBa2Cu 3Ox'. Physica C Superconductivity and Its Applications, 402 (3). pp. 277 - 282. ISSN: 0921-4534

Huang, Y. (2004) 'In situ observations of microstructural evolution during deformation of Supral 100'. Materials Science Forum, 447-448. pp. 381 - 386. ISSN: 0255-5476

Atherton, MA. and Bates, RA. (2004) 'Robust optimization of cardiovascular stents: A comparison of methods'. Engineering Optimization, 36 (2). pp. 207 - 217. ISSN: 0305-215X Open Access Link

Taylor, AM., Bonser, RHC. and Farrent, JW. (2004) 'The influence of hydration on the tensile and compressive properties of avian keratinous tissues'. Journal of Materials Science, 39 (3). pp. 939 - 942. ISSN: 0022-2461

He, Z., Zhou, X. and Li, Z. (2004) 'New experimental method for studying early-age cracking of cement-based materials'. ACI Materials Journal, 101 (1). pp. 50 - 56. ISSN: 0889-325X

Gallear, D. and Ghobadian, A. (2004) 'Supply chain purchasing strategy'. Logistics and Transport Focus. pp. 52 - 54.

Li, LW., Dong, S. and Cheng, K. (2004) '3D surface topography formation in ultra-precision turning'. Journal of Harbin Institute of Technology New Series, 11 (1). pp. 82 - 86. ISSN: 1005-9113

Nygård, K., Huotari, S., Hämäläinen, K., Manninen, S., Buslaps, T., Hari Babu, N., Kambara, M. and Cardwell, DA. et al. (2004) 'Temperature dependence of MgB2 Compton profiles'. Physical Review B Condensed Matter and Materials Physics, 69 (2). ISSN: 1098-0121

Perry, M., Dowdall, A., Lines, L. and Hone, K. (2004) 'Multimodal and ubiquitous computing systems: supporting independent-living older users'. IEEE Transactions on Information Technology in BioMedicine, 8 (3). pp. 258 - 270. ISSN: 1089-7771 Open Access Link

Lines, L. and Hone, K. (2004) 'Interactive domestic alarm handling: older adults' interaction with speech alarms'.26th International Conference on Information Technology Interfaces (ITI 2004). Cavtat, CROATIA. UNIV ZAGREB, FACULTY MECHANICAL ENGINEERING & NAVAL ARCHITECTURE. pp. 367 - 372. ISSN: 1330-1012

Chen, SY., Magoulas, GD. and Macredie, RD. (2004) 'Cognitive styles and users' responses to structured information representation'. International Journal of Digital Libraries, 4 (2). pp. 93 - 107. ISSN: 1432-5012

Lines, L. and Hone, KS. (2004) 'Eliciting user requirements with older adults: lessons from the design of an interactive domestic alarm system'. Universal Access in the Information Society, 3 (2). pp. 141 - 148. ISSN: 1615-5289 Open Access Link

Farahani, K. and Bahai, H. (2004) 'Hyper-elastic constitutive equations of conjugate stresses and strain tensors for the Seth-Hill strain measures'. International Journal of Engineering Science, 42 (1). pp. 29 - 41. ISSN: 0020-7225