IMM
Banks, HT., Hu, S., Kenz, Z., Kruse, C., Shaw, S., Whiteman, JR., et al. (2012) 'Material parameter estimation and hypothesis testing on a 1D viscoelastic stenosis model: Methodology'. Journal of Inverse and III-posed Problems, 21 (1). pp. 25 - 57. ISSN: 0928-0219 Open Access Link
Pei, E. (2012) 'Design for Manufacturing'. Journal of Assembly Automation, 32 (2). pp. 130 - 131. ISSN: 0144-5154 Open Access Link
Makanjuola, JK., Aggoun, A., Swash, MR. and Grange, P. (2012) '3D-holoscopic technology: a new dimension beyond stereoscopic imaging'.The European Association of Endoscopic Surgeons. Brussels.
Shi, Y-H., Durrell, JH., Dennis, AR., Hari Babu, N., Mancini, CE. and Cardwell, DA. (2012) 'Properties of grain boundaries in bulk, melt processed Y–Ba–Cu–O fabricated using bridge-shaped seeds'. Superconductor Science and Technology, 25 (4). pp. 045006 - 045006. ISSN: 0953-2048
Alfano, G., De Cicco, Ph.D., F. and Prota, A. (2012) 'Intermediate Debonding Failure of RC Beams Retrofitted in Flexure with FRP: Experimental Results versus Prediction of Codes of Practice'. Journal of Composites for Construction, 16 (2). pp. 185 - 195. ISSN: 1090-0268
Mikhailov, SE. and Mohamed, NA. (2012) 'Numerical solution and spectrum of boundary-domain integral equation for the Neumann BVP with variable coefficient'. International Journal of Computer Mathematics, 89 (11). pp. 1488 - 1503. ISSN: 0020-7160 Open Access Link
Mendis, CL., Jhawar, HP., Sasaki, TT., Oh-ishi, K., Sivaprasad, K., Fleury, E. and et al. (2012) 'Mechanical properties and microstructures of Al–1Fe–(0-1)Zr bulk nano-crystalline alloy processed by mechanical alloying and spark plasma sintering'. Materials Science and Engineering: A, 541. pp. 152 - 158. ISSN: 0921-5093
Lebon, GSB., Patel, MK., Djambazov, G. and Pericleous, KA. (2012) 'Mathematical modelling of a compressible oxygen jet entering a hot environment using a pressure-based finite volume code'. Computers & Fluids, 59. pp. 91 - 100. ISSN: 0045-7930
Dong, W., Zhou, X. and Wu, Z. (2012) 'CRACK EXTENSION RESISTANCE OF CONCRETE BASED ON INITIAL FRACTURE TOUGHNESS'.20th UK National Conference of the Association for Computational Mechanics in Engineering. Manchester, United Kingdom. 26 - 28 March. University of Manchester. pp. 179 - 182.
Ceschin, F. (2012) 'The introduction and scaling up of sustainable Product-Service Systems. A new role for strategic design for sustainability'. PhD Thesis.
Pericleous, K., Lebon, B., Djambazov, G. and Patel, M. (2012) 'Mathematical Modeling of a Compressible Oxygen Jet Interacting with a Free Surface in a Basic Oxygen Furnace for Steel Production', in Nastac, L., Zhang, L., Thomas, BG., Sabau, A., ElKaddah, N., Powell, AC. and et al. (eds.) Cfd Modeling and Simulation in Materials Processing. Wiley. pp. 287 - 294. ISBN 13: 9781118296158.
Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'Formation of Microstructure in Al‐Si Alloys under Ultrasonic Melt Treatment'. Wiley. pp. 999 - 1004.
Nowak, M. and Nadendla, HB. (2012) 'Grain Refiner for Aluminium‐Silicon Sand Casting Aloys', inLight Metals 2012. Wiley. pp. 349 - 353. ISBN 13: 9781118291399.
Huang, Y. and Prangnell, PB. (2012) 'Dynamic Recovery during Low Temperature Deformation in an Al‐0.1 Mg Alloy'. TMS Annual Meeting. pp. 161 - 168.
Huang, Y. and Prangnell, PB. (2012) 'Dynamic recovery during low temperature deformation in an Al-0.1Mg Alloy'.TMS 2012 Annual Meeting & Exibition on Materials Processing Fundamentals. Orlando, USA. 11 - 15 March.
Huang, Y. (2012) 'Magnesium alloys: opportunities and challenges'.Materials Knowledge Transfer Network Annual Meeting. London, UK. 4 - 4 March. [unpublished]
Pei, E. and Dean, L. (2012) 'Exploring the Use of Additive Manufacture for High Value Consumer Products'.13th Conference on Rapid Design, Prototyping & Manufacturing (RDPM2012). Lancaster University.
Koulouri, T., Lauria, S., Macredie, RD. and Chen, SY. (2012) 'Are we there yet?: the role of gender on the effectiveness and efficiency of user-robot communication in navigational tasks'. ACM Transactions on Computer-Human Interaction, 19 (1). pp. 1 - 29. ISSN: 1073-0516 Open Access Link
Lawrie, JB. (2012) 'Comments on a class of orthogonality relations relevant to fluid-structure interaction'. Meccanica, 47 (3). pp. 783 - 788. ISSN: 0025-6455 Open Access Link
Bayandorian, I., Huang, Y., Fan, Z., Pawar, S., Zhou, X. and Thompson, GE. (2012) 'The impact of melt-conditioned twin-roll casting on the downstream processing of an AZ31 magnesium alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (3). pp. 1035 - 1047. ISSN: 1073-5623 Open Access Link
Soua, S., Bridge, B., Cebulski, L. and Gan, T-H. (2012) 'Statistical analysis of accelerometer data in the online monitoring of a power slip ring in a wind turbine'. Measurement Science and Technology, 23 (3). pp. 035006 - 035006. ISSN: 0957-0233
Lawrie, JB. (2012) 'On acoustic propagation in three-dimensional rectangular ducts with flexible walls and porous linings'. Journal of the Acoustical Society of America, 131 (3). pp. 1890 - 1901. ISSN: 0001-4966 Open Access Link
Lebon, GSB., Patel, MK. and Pericleous, KA. (2012) 'Investigation of Instabilities Arising with Non-Orthogonal Meshes Used in Cell Centred Elliptic Finite Volume Computations'. Journal of Algorithms & Computational Technology, 6 (1). pp. 129 - 152. ISSN: 1748-3018
Huang, Y., Wang, L., Liu, Y. and Wu, JT. (2012) 'Investigation on hot corrosion resistance of a new directional solidification superalloy at 750°C'. Dongbei Daxue Xuebao Journal of Northeastern University, 33 (3). pp. 365 - 368. ISSN: 1005-3026
Fang, CM., van Huis, MA., Thijsse, BJ. and Zandbergen, HW. (2012) 'Stability and crystal structures of iron carbides: A comparison between the semi-empirical modified embedded atom method and quantum-mechanical DFT calculations'. Physical Review B, 85 (5). ISSN: 1098-0121
Zhou, X. and Li, Z. (2012) 'Light-weight wood-magnesium oxychloride cement composite building products made by extrusion'. Construction and Building Materials, 27 (1). pp. 382 - 389. ISSN: 0950-0618 Open Access Link
Zhou, X., Slater, J., Wavell, S. and Oladiran, O. (2012) 'Effects of PFA and GGBS on early-ages engineering properties of Portland cement systems'. Journal of Advanced Concrete Technology, 10 (2). pp. 74 - 85. ISSN: 1346-8014
Leydecker, F., Maischak, M., Stephan, EP. and Teltscher, M. (2012) 'Ap-hierarchical error estimator for a fe–be coupling formulation applied to electromagnetic scattering problems in ℝ3'. Applicable Analysis, 91 (2). pp. 277 - 293. ISSN: 0003-6811
Li, HT., Wang, Y. and Fan, Z. (2012) 'Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys'. Acta Materialia, 60 (4). pp. 1528 - 1537. ISSN: 1359-6454 Open Access Link
Mendis, CL., Oh-ishi, K., Ohkubo, T. and Hono, K. (2012) 'Effect of Li additions on the age hardening response and precipitate microstructures of Mg–2.4Zn–0.16Zr based alloys'. Materials Science and Engineering: A, 535. pp. 122 - 128. ISSN: 0921-5093
Makanjuola, JK., Aggoun, A., Swash, MR., Grange, P., Challacombe, BC. and Dasgupta, P. (2012) '3D-Holoscopic Imaging: A New Dimension To Enhance Imaging In Minimally Invasive Therapy In Urological Oncology'.27th Annual Meeting of Engineering and Urology Society. Georgia World Congress Center Atlanta, GA.
Bakhshali, MA., Daneshvar, S. and Mafi, M. (2012) 'Modeling the heart defect of transposition of the great arteries using the PHYSBE model'.2012 International Conference on Biomedical Engineering (ICoBE). IEEE. pp. 186 - 190.
de Carellan, I., Catton, P., Selcuk, C. and Gan, T-H. (2012) 'Methods for detection and cleaning of fouling in pipelines'.5th International Conference on Emerging Technologies in Non-Destructive Testing (NDT). Ioannina, GREECE. 26 - 21 September. CRC Press. pp. 231 - 236.
Domínguez, C., Stephan, EP. and Maischak, M. (2012) 'FE/BE coupling for an acoustic fluid-structure interaction problem. Residual a posteriori error estimates'. International Journal for Numerical Methods in Engineering, 89 (3). pp. 299 - 322. ISSN: 0029-5981 Open Access Link
Albesher, A. and De Coster, R. (2012) 'The impact of information technology resources on SMEs' innovation performance'.Danish Research Unit for Industrial Dynamics (DRUID) Academy Conference. Cambridge, UK. 19 - 21 January.Open Access Link
Zhang, L., Eskin, DG., Miroux, AG. and Katgerman, L. (2012) 'On the mechanism of the formation of primary intermetallics under ultrasonic melt treatment in an Al-Zr-Ti alloy'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. 12 - 10 June. IOP Publishing. pp. 012002 - 012002. ISSN: 1757-8981
Subroto, TAS., Miroux, AG., Eskin, DG. and Katgerman, L. (2012) 'Constitutive behaviour of an as-cast AA7050 alloy in the sub-solidus temperature range'.3rd International Conference on Advances in Solidification Processes. NETHERLANDS. 12 - 10 June. IOP Publishing. pp. 012074 - 012074. ISSN: 1757-8981
Kitayama, K., Cardoso, RP., Yoon, JW., Uemori, T. and Yoshida, F. (2012) 'Cyclic crystal plasticity finite element analysis and experimental validation of HCP materials'.International Symposium on Plasticity 2012.
Cardoso, RP., Katayama, K., Yoon, JW., Uemori, T. and Yoshida, F. (2012) 'Thermomechanical crystal plasticity finite element analysis and experimental validation of HCP materials'.International Symposium on Plasticity 2012.
Rees, DWA. (2012) 'Mechanics of deformable solids'. Studium Press LLC. ISSN 10: 1-933699-620 ISSN 13: 9781933699622
Hosseini Kordkheili, SA., Momeni Massouleh, SH., Kokabi, MJ. and Bahai, H. (2012) 'A modal coupling procedure to improve residual modal effects based on experimentally generated data'. Journal of Sound and Vibration, 331 (1). pp. 66 - 80. ISSN: 0022-460X
Sun, X., Bateman, R., Cheng, K. and Ghani, SC. (2012) 'Design and analysis of an internally cooled smart cutting tool for dry cutting'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (4). pp. 585 - 591. ISSN: 0954-4054
Reid, SR., Aleyaasin, M. and Wang, B. (2012) 'Out-of-plane pipe whip for a bent cantilever pipe: Comparison between experiment and FEM models'. Journal of Applied Mechanics, 79 (1). ISSN: 0021-8936
Wei, J. and Winter, M. (2012) 'Flow-distributed spikes for Schnakenberg kinetics'. Journal of Mathematical Biology, 64 (1-2). pp. 211 - 254. ISSN: 0303-6812 Open Access Link
Gallear, D., Ghobadian, A. and Chen, W. (2012) 'Corporate responsibility, supply chain partnership and performance: an empirical examination'. International Journal of Production Economics, 140 (1). pp. 83 - 91. ISSN: 0925-5273 Open Access Link
Choi, Y., Lim, S. and Evans, M. (2012) 'Supporting design: National business support programmes in the UK and South Korea'. The Design Journal, 15 (1). pp. 79 - 104. ISSN: 1991-3761
Lawrie, JB. and Kaplunov, JD. (2012) 'Edge waves and resonance on elastic structures: An overview'. Mathematics and Mechanics of Solids, 17 (1). pp. 4 - 16. ISSN: 1081-2865 Open Access Link
Abrahams, ID. and Lawrie, JB. (2012) 'Scattering of flexural waves by a semi-infinite crack in an elastic plate carrying an electric current'. Mathematics and Mechanics of Solids, 17 (1). pp. 43 - 58. ISSN: 1081-2865 Open Access Link
Pichugin, AV. and Rogerson, GA. (2012) 'Extensional edge waves in pre-stressed incompressible plates'. Mathematics and Mechanics of Solids, 17 (1). pp. 27 - 42. ISSN: 1081-2865
Mansouri, SA., Gallear, D. and Askariazad, MH. (2012) 'Decision support for build-to-order supply chain management through multiobjective optimization'. International Journal of Production Economics, 135 (1). pp. 24 - 36. ISSN: 0925-5273 Open Access Link
Huang, Y. and Humphreys, FJ. (2012) 'The effect of solutes on grain boundary mobility during recrystallization and grain growth in some single-phase aluminium alloys'. Materials Chemistry and Physics, 132 (1). pp. 166 - 174. ISSN: 0254-0584