Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Rheo-extrusion of AZ91D'. Solid State Phenomena, 192-193. pp. 470 - 475.

Ponomarev, MG., Kappatos, V., Selcuk, C., Gan, TH., Amos, M., Halai, H., Gierl, C. and Lovea, M. et al. (2012) 'Development of a digital radiographic inspection technique for production friendly quality assessment of powder metallurgy parts'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition Euro Pm 2012.

Bai, Q., Ivanov, A., Cheng, K. and Wardle, F. (2012) 'Design of a μeCM machine tool: A holistic approach and its implementation perspectives'. Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology Euspen 2012. pp. 348 - 351.

Gardner, L. and Cashell, KA. (2012) 'Trusses', in Davison B. and Owens G. (eds.) Steel Designers' Manual. Steel Construction Institute. pp. 600 - 623.

Chizari, M., Snow, M., Cheung, W., Mahmud, J. and Wang, B. (2012) 'Relative motion of tendon limbs in a loop tendon graft'. Biomedical Engineering: Applications, Basis and Communications, 24 (5). pp. 447 - 451. ISSN: 1016-2372

Mares, C. and Esperon Miguez, M. (2012) 'Model updating of a helicopter stub wing'. International Conference on Noise and Vibration Engineering 2012 ISMA 2012 Including Usd 2012 International Conference on Uncertainty in Structure Dynamics. pp. 2039 - 2043.

de Carellan, IG., Catton, P., Gan, TH., Selcuk, C. and Haig, A. (2012) 'Laser vibrometry to identify resonances of coated substrates'. 51st Annual Conference of the British Institute of Non Destructive Testing 2012 NDT 2012. pp. 383 - 390.

Mohimi, A., Gan, TH., Balachandran, W., Selcuk, C. and Edwards, G. (2012) 'Guided wave transducers for inspection of high temperature superheated steam pipes'. 51st Annual Conference of the British Institute of Non Destructive Testing 2012 NDT 2012. pp. 272 - 278.

Gan, TH. and Edwards, G. (2012) 'Advancement of NDT technologies through the European FP7 research for the benefit of SMEs funding scheme'. 51st Annual Conference of the British Institute of Non Destructive Testing 2012 NDT 2012. pp. 100 - 110.

Qu, Z., Bennecer, A., Selcuk, C. and Gan, TH. (2012) 'Development of a laser-based weld flaw identification system'. 51st Annual Conference of the British Institute of Non Destructive Testing 2012 NDT 2012. pp. 21 - 29.

Soua, S. and Gan, TH. (2012) 'Development of in-service Condition Monitoring system using combined vibrational and Acoustic Emission signature for wind turbine gearbox and generator shaft'. 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012 CM 2012 and Mfpt 2012. pp. 186 - 202.

Iovea, M., Neagu, M., Mateiasi, G., Halai, HV., Amos, M., Ponomarev, M., Kappatos, V., Selcuk, C., Gan, TH., Gierl, C. and Momeni, M. et al. (2012) 'Preliminary NDT investigation of sintered Powder Metallurgy parts by high-resolution TDI based X-ray digital radiography'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition Euro Pm 2012.

Li, H-T., Wang, Y. and Fan, Z. (2012) 'Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al-Mg alloys'. Acta Materialia, 60 (4). pp. 1528 - 1537. ISSN: 1359-6454

Silvera, Y. and De Coster, R. (2012) 'Supply chain visibility and how this affects on time delivery - a case study of a UK SME food distributor'. Journal of Arts, Science and Technology.

Edmans, B., Alfano, G. and Bahai, H. (2012) 'Large-scale analysis and local stress assessment of flexible unbonded pipes using FEA'.ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering. Rio de Janeiro, BRAZIL. 1 - 6 July. American Society of Mechanical Engineers. pp. 947 - 953.

Edmans, B., Alfano, G., Bahai, H., Andronicou, L. and Bahtui, A. (2012) 'Local stress assessment of flexible unbonded pipes using FEA'.ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering. Rio de Janeiro, BRAZIL. 1 - 6 July. American Society of Mechanical Engineers. pp. 939 - 945.

Liu, Y., Wu, H-X. and Wang, B. (2012) 'Gradient design of metal hollow sphere (MHS) foams with density gradients'. Composites Part B: Engineering, 43 (3). pp. 1346 - 1352. ISSN: 1359-8368 Open Access Link

Baharin, R., Hobson, PR., Leslie, DE. and Smith, DR. (2012) 'Effect of gamma radiation on potential ionising radiation detectors and dosimeters based on quantum dots'. IEEE Nuclear Science Symposium Conference Record. pp. 3228 - 3231. ISSN: 1095-7863

Ponomarev, MG., Selcuk, C. and Gan, T-H. (2012) 'Construction of pattern recognition system optimized for X-ray inspection of plastic electronics and OLED displays'. 51st Annual Conference of the British Institute of Non Destructive Testing 2012 NDT 2012. pp. 354 - 360.

Lam, B. (2012) 'Co-designing multicultural teaching and learning approach for design management programme'. Journal of Design Management, 3 (1). pp. 8 - 15.

Lam, B. (2012) 'Playing for everyone: Community-led design through digital games'. Design Management Review, 24 (1). pp. 20 - 27.

Fernando, TGI. and Kalganova, T. (2012) 'Multi-colony ant systems for multi-hose routing'. International Journal of Computer Applications, 59 (2). pp. 1 - 14.Open Access Link

Vezzoli, C., Ceschin, F., Diehl, JC. and Kohtala, C. (2012) 'Why have 'Sustainable Product-Service Systems' not been widely implemented? Meeting new design challenges to achieve societal sustainability'. Journal of Cleaner Production, 35. pp. 288 - 290. ISSN: 0959-6526

Sundaram, K., Babu, NH., Scamans, GM., Eskin, DG. and Fan, Z. (2012) 'Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content'. International Journal of Materials Research, 103 (10). pp. 1228 - 1234.

Algethmi, M. and De Coster, R. (2012) 'Factors affecting consumer acceptance of mobile services in the airline sector: the case of Saudi Arabia'. International Journal of Management and Marketing Academy, 1 (1). pp. 32 - 49. ISSN: 2048-8807

Ji, S., Watson, D., Fan, Z. and White, M. (2012) 'Development of a super ductile diecast Al-Mg-Si alloy'. Materials Science and Engineering A. ISSN: 0921-5093

Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2012) 'ROLE OF SOLUTE AND TRANSITION METALS IN GRAIN REFINEMENT OF ALUMINUM ALLOYS UNDER ULTRASONIC MELT TREATMENT'.13th International Conference on Aluminum Alloys (ICAA). Carnegie Mellon Univ, Pittsburgh, PA. 1 - 7 June. JOHN WILEY & SONS. pp. 1389 - 1394.

Vignjevic, R. and Hughes, K. (2012) 'Aircraft Seat Compliance (CS25.562) against seat track pre-distortion load case: Use of numerical simulation tools for concept development'.RAES 3rd Aircraft Structural Design Conference. Delft, Netherlands.

Wang, B. and Nesic, D. (2012) 'Semiglobal practical stability of a class of parameterized networked control systems'.2012 IEEE 51st Annual Conference on Decision and Control (CDC). IEEE. pp. 752 - 756. ISSN: 0743-1546

Pei, E. (2012) 'Design for manufacturing'. ASSEMBLY AUTOMATION, 32 (2). pp. 111 - 111. ISSN: 0144-5154

Rees, DWA. and Taylor, BS. (2012) 'Stress Concentrations for Slotted Plates in Bi-Axial Stress'. Engineering, 04 (02). pp. 69 - 75. ISSN: 1947-3931

Musuva, M. and Mares, C. (2012) 'The wavelet finite element analysis of a beam subject to a moving load'. Civil Comp Proceedings, 98. ISSN: 1759-3433

Adetoro, OB., Sim, W-M. and Wen, PH. (2012) 'STABILITY LOBES PREDICTION FOR CORNER RADIUS END MILL USING NONLINEAR CUTTING FORCE COEFFICIENTS'. Machining Science and Technology, 16 (1). pp. 111 - 130. ISSN: 1091-0344 Open Access Link

Wang, Y., Li, H-T. and Fan, Z. (2012) 'Oxidation of Aluminium Alloy Melts and Inoculation by Oxide Particles'. Transactions of the Indian Institute of Metals. pp. 1 - 9. ISSN: 0972-2815

Ursache, N. and Mares, C. (2012) 'Innovative Teaching and Assessment at Brunel University', inOn Innovative Curriculum through Employer Engagement. Royal Academy of Engineering.

Fang, CM., Van Huis, MA. and Zandbergen, HW. (2012) 'Stability and structures of the CFCC-TmC phases: A first-principles study'. Computational Materials Science, 51 (1). pp. 146 - 150. ISSN: 0927-0256

Maidin, S., Pei, E. and Campbell, RI. (2012) 'A Taxonomy of Design Features for Additive Manufacture'.iDECON 2012. Melaka.

Pei, E. (2012) 'Experimental 3D Digital Techniques in Design Practice'.The 2nd International Conference on Design Creativity (ICDC2012). Glasgow. Icdc 2012 2nd International Conference on Design Creativity Proceedings. pp. 220 - 226.

Campbell, JC. and Vignjevic, R. (2012) 'Simulating structural response to water impact'. International Journal of Impact Engineering, 49. pp. 1 - 10. ISSN: 0734-743X

Tirovic, M., Sergent, N., Campbell, J., Roberts, P. and Vignjevic, R. (2012) 'Structural analysis of a commercial vehicle disc brake caliper'. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 226 (5). pp. 613 - 622. ISSN: 0954-4070

Vignjevic, R., Djordjevic, N. and De Vuyst, T. (2012) 'Progressive damage in woven CFRPP in presence of shock waves'. Eccm 2012 Composites at Venice Proceedings of the 15th European Conference on Composite Materials.

Atherton, M., Larrabide, I., Collins, M., Frangi, A., Pereira, VM. and Saxter, T. (2012) 'Effect of stent position on flow characteristics in a cerebral aneurysm'.BioEngineering12. Oxford University.Open Access Link

Atherton, M., Jensen, F., Kent, R., Leekam, S., McGonigle, D., Rotter, K. and White, L. et al. (2012) 'Anxiogenic sounds for people with Autism Spectrum Disorder'.British Society of Audiology 3rd Annual Conference and Experimental & Clinical Short Papers Meeting. Nottingham.Open Access Link

Yu, Y., Ferri, C., Yang, Q. and Wang, X. (2011) 'Numerical simulation of natural frequencies in the design of micro air vehicle structures'. Proceedings of 2011 17th International Conference on Automation and Computing Icac 2011. pp. 167 - 171.

Bayandorian, I., Fan, Z., Stone, IC., Huang, Y. and Scamans, GM. (2011) 'Advances in Twin Roll Casting of Magnesium Alloys'.The John Hunt International Symposium. Brunel University, Uxbridge, UK. 12 - 14 December. Brunel Unievrsity Press. pp. 319 - 333.

Hunt, JD. and Fan, Z. (2011) 'A simple model for the nucleation and growth of equiaxed grains'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 59 - 78.

Li, H-T., Wang, Y., Zuo, Y. and Fan, Z. (2011) 'Harnessing oxides in liquid metals and alloys'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 93 - 110.

Bayandorian, I., Fan, Z., Stone, IC., Huang, Y. and Scamans, GM. (2011) 'Advances in twin roll casting of magnesium alloys'.John Hunt International Symposium. Brunel University, UK. 12 - 14 December. Brunel University Press. pp. 319 - 333.

Mousavi, A. (2011) 'Simulation-based real-time performance monitoring (simmon): A platform for manufacturing and healthcare systems'.Proceedings of the 2011 Winter Simulation Conference. Arizona. 11 - 14 December. IEEE. pp. 600 - 611. ISSN: 0891-7736

Algethmi, M. and De Coster, R. (2011) 'The impact of information technology resources on SME's innovation'.1st International Colloquium on Global Design and Marketing. University of Lincoln, Lincoln, UK. 8 - 9 December. [unpublished]

Kumar, S., Babu, NH., Scamans, GM. and Fan, Z. (2011) 'Microstructural evaluation of melt conditioned twin roll cast Al-Mg alloy'. Materials Science and Technology, 27 (12). pp. 1833 - 1839. ISSN: 0267-0836