IMM
Bolzoni, L., Nowak, K. and Nadendla, HB. (2014) 'Grain refinement of Al-Si alloys by Nb-B inoculation. Part II: application to commercial alloys'. Materials and Design, 66, Part A, (5 February 2015). pp. 376 - 383. ISSN: 1873-4197 Open Access Link
Zhou, X., Dong, W., Oladiran, O., Wu, Z. and Kastiukas, G. (2014) 'Numerical and Experimental Assessment of the Effects of Specimen Size on Shrinkage Cracking of Concrete'.Twelfth International Conference on Computational Structures Technology. Naples, Italy. 2 - 5 September. Civil-Comp Press. pp. 1 - 20. ISSN: 1759-3433
Tarhini, A., Hone, K. and Liu, X. (2014) 'Measuring the Moderating Effect of Gender and Age on E-Learning Acceptance in England: A Structural Equation Modeling Approach for An Extended Technology Acceptance Model'. Journal of Educational Computing Research, 51 (2). pp. 163 - 184. ISSN: 0735-6331
Mares, C. and Ursache, N. (2014) 'Aircraft Ground Structural Testing', in Blockley, R. and Shyy, W. (eds.) Encyclopedia of Aerospace Engineering. Wiley. pp. 1 - 16. ISBN 13: 9780470754405.
Srinivasan, A., Blawert, C., Huang, Y., Mendis, CL., Kainer, KU. and Hort, N. (2014) 'Corrosion behavior of Mg–Gd–Zn based alloys in aqueous NaCl solution'. Journal of Magnesium and Alloys, 2 (3). pp. 245 - 256. ISSN: 2213-9567
Gulavani, O., Hughes, K. and Vignjevic, R. (2014) 'Explicit dynamic formulation to demonstrate compliance against quasi-static aircraft seat certification loads (CS25.561) -Part I: Influence of time and mass scaling'. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 228 (11). pp. 1982 - 1995. ISSN: 0954-4100
Sayad Saravi, S., Cheng, K., Chong, TP. and Vathylakis, A. (2014) 'Design of serrate-semi-circular riblets with application to skin friction reduction on engineering surface'. International Journal of Flow Control, 6 (3). pp. 83 - 92. ISSN: 1756-8250 Open Access Link
Que, Z-P., Ma, T., Wang, J., Chen, J., Wang, C-H. and Cheng, W-L. (2014) 'Microstructure and mechanical properties of as-cast Mg-8Sn-1Al-1Zn-xNi alloys'. Journal of Central South University, 21 (9). pp. 3426 - 3433. ISSN: 2095-2899
Ji, H., Xia, F. and Cheng, K. (2014) 'Engineering drawing man-hour forecasting based on BP-GA in design of chemical equipment'. 2014 20th International Conference on Automation and Computing. pp. 206 - 211.
Ceschin, F., Resta, B., Vezzoli, C. and Gaiardelli, P. (2014) 'Visualising product-service system business models'.19th DMI: Academic Design Management Conference. London. 1 - 4 September. Design Management Institute. pp. 2123 - 2152.Open Access Link
Mohimi, A., Gan, T-H. and Balachandran, W. (2014) 'Development of high temperature ultrasonic guided wave transducer for continuous in service monitoring of steam lines using non-stoichiometric lithium niobate piezoelectric ceramic'. Elsevier BV. pp. 432 - 442. ISSN: 0924-4247
Lau, ET., Yang, Q., Taylor, GA., Forbes, AB., Wright, P. and Livina, VN. (2014) 'Optimization of carbon emissions in smart grids'.2014 49th International Universities Power Engineering Conference (UPEC). ClujNapoca, ROMANIA. IEEE. pp. 1 - 4.
Li, Z., Atherton, M. and Harrison, D. (2014) 'Identifying patent conflicts: TRIZ-Led Patent Mapping'. World Patent Information, 39 (Dec 2014). pp. 11 - 23. ISSN: 0172-2190 Open Access Link
Wiese, B., Mendis, CL., Tolnai, D., Stark, A., Schell, N., Reichel, HP., et al. (2014) 'CaO dissolution during melting and solidification of a Mg-10 wt.% CaO alloy detected with in situ synchrotron radiation diffraction'. Journal of Alloys and Compounds, 618. pp. 64 - 66. ISSN: 0925-8388
Fateri, S., Boulgouris, NV., Wilkinson, A., Balachandran, W. and Gan, T-H. (2014) 'Frequency-sweep examination for wave mode identification in multimodal ultrasonic guided wave signal'. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 61 (9). pp. 1515 - 1524. ISSN: 0885-3010 Open Access Link
Yang, H., Watson, D., Wang, Y. and Ji, S. (2014) 'Effect of nickel on the microstructure and mechanical property of die-cast Al–Mg–Si–Mn alloy'. Journal of Materials Science, 49 (24). pp. 8412 - 8422. ISSN: 0022-2461 Open Access Link
Mehrabani, M., Zhou, X. and Chen, H. (2014) 'Lifecycle performance assessment of steel fibre reinforced concrete ground slabs'.the 2014 International Conference on Advances in Structural Engineering and Mechanics (ICASEM2014). Busan, Korea. 24 - 28 August. Techno Press.
Tagang, IJ., Robert, CC., Pei, E. and Higgett, N. (2014) 'Determination of Comfort and Performance Properties of Upper Materials for Diabetic Footwear Construction'.Materials Science and Technology Society of Nigeria Conference, National Institute of Leather Science and Technology, NILEST. Zaria, Nigeria. 23Open Access Link
Areias, P., Cesar de Sa, JM. and Cardoso, RP. (2014) 'A simple assumed-strain quadrilateral shell element for finite strains and fracture'. Engineering with Computers, 31 (4). pp. 691 - 709. ISSN: 0177-0667
Su, SS., Chang, ITH., Kuo, WCH., Price, D., Pikramenou, Z. and Lead, J. (2014) 'Pulsed electrical discharge synthesis of red photoluminescence zinc oxide nanoparticles'. Journal of Nanoparticle Research, 16 (9). ISSN: 1388-0764
Men, H. and Fan, Z. (2014) 'An Analytical Model for Solute Segregation at Liquid Metal/Solid Substrate Interface'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (12). pp. 5508 - 5516. ISSN: 1073-5623
Eskin, GI. and Eskin, DG. (2014) 'Ultrasonic Treatment of Light Alloy Melts'. Boca Raton, FL: CRS Press. ISSN 13: 978-1-4665-7798-5
Seyajah, N., Cheng, K. and Bateman, R. (2014) 'Development of Sustainable Design Index for Office Furniture Design and its CAD-Based Implementation'.ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers.
Howard, MJ. and Cheng, K. (2014) 'Energy and Resource Efficiency in the Abrasive Flow Machining Process: An Assessment of Environmental and Economic Viability Within a UK Precision Machining SME'.ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers.
Pei, E. (2014) 'Reflecting on Design Sketching: Implications for Problem-Framing and Solution-focused Conceptual Ideation'. Archives of Design Research, 28 (1). ISSN: 1226-8046 Open Access Link
Wang, C., Cheng, K., Nelson, N., Sawangsri, W. and Rakowski, R. (2014) 'Cutting force-based analysis and correlative observations on the tool wear in diamond turning of singlecrystal silicon'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (10). pp. 1867 - 1873. ISSN: 0954-4054
Eskin, GI. and Eskin, DG. (2014) 'Ultrasonic Treatment of Light Alloy Melts'. London: Routledge. ISSN 13: 9781466577985
Shamass, R., Zhou, X. and Alfano, G. (2014) 'Finite-element analysis of shear-off failure of keyed dry joints in precast concrete segmental bridges'. Journal of Bridge Engineering, 20 (6). ISSN: 1943-5592 Open Access Link
Cheng, W., Wang, M., Que, Z., Wang, H., Zhang, J., Xu, C., et al. (2014) 'Microstructural characterizations and mechanical properties of Mg-8Sn-1Al-1Zn-xCu alloys'. Journal of Wuhan University of Technology-Mater. Sci. Ed., 29 (4). pp. 803 - 807. ISSN: 1000-2413
Yang, W., Ji, S., Zhou, X., Stone, I., Scamans, G., Thompson, GE. and et al. (2014) 'Heterogeneous nucleation of α-Al grain on primary α-AlFeMnSi intermetallic investigated using 3d sem ultramicrotomy and HRTEM'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (9). pp. 3971 - 3980. ISSN: 1073-5623 Open Access Link
Rafael, S., Romero, A., Soua, S., Gan, T-H., Neasham, J. and Goodfellow, G. (2014) 'Detection of gearbox failures by combined acoustic emission and vibration sensing in rotating machinery'. Insight - Non-Destructive Testing and Condition Monitoring, 56 (8). pp. 422 - 425. ISSN: 1354-2575
Artigao, E., Ferrando, JL., Gan, T-H., Wang, B., Kappatos, V., Selcuk, C. and et al. (2014) 'Development of a baseline as a novel strategy for a condition monitoring system for the assessment of wind turbine generators'. Insight - Non-Destructive Testing and Condition Monitoring, 56 (8). pp. 417 - 421. ISSN: 1354-2575
Hughes, K., Gulavani, O., Vuyst, TD. and Vignjevic, R. (2014) 'Explicit dynamic formulation to demonstrate compliance against quasi-static aircraft seat certification loads (CS25.561) - Part II: Influence of body blocks'. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 228 (10). pp. 1890 - 1903. ISSN: 0954-4100
Faragasso, A., Stilli, A., Bimbo, J., Noh, Y., Liu, H., Nanayakkara, T., et al. (2014) 'Endoscopic add-on stiffness probe for real-time soft surface characterisation in MIS'.2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). Chicago, IL. IEEE. pp. 6517 - 6520. ISSN: 1557-170X
Yohan Noh., Secco, EL., Sareh, S., Wurdemann, H., Faragasso, A., Back, J., et al. (2014) 'A continuum body force sensor designed for flexible surgical robotics devices'.2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). Chicago, IL. IEEE. pp. 3711 - 3714. ISSN: 1557-170X
Cantor, EJ., Khera, B., Reeves, J., Birch, M., Shaw, S., banks, HT., et al. (2014) 'Acoustic localisation of coronary artery stenosis'.82nd Congress of the European-Atherosclerosis-Society (EAS). Spanish Soc Atherosclerosis, Madrid, SPAIN. Elsevier BV. pp. e272 - e272. ISSN: 0021-9150
Rafiq, MY. and Rustell, M. (2014) 'Building information modeling steered by evolutionary computing'. Journal of Computing in Civil Engineering, 28 (4). ISSN: 0887-3801
Yang, Q., Tang, Q., Wang, X. and Liu, C. (2014) 'Line of sight stabilization control based on Fuzzy PID controller and Kalman filter'. WIT Transactions on Engineering Sciences, 95. pp. 33 - 41. ISSN: 1743-3533
Zhou, X., Oladiran, OG. and Dong, W. (2014) 'On utilization of elliptical rings in assessing cracking tendency of concrete'.4th International Conference on the Durability of Concrete Structures. Purdue University, West Lafayette, Indiana, USA. 24 - 26 July. Purdue University Press. pp. 327 - 334.Open Access Link
Borsci, S., Macredie, RD., Martin, JL. and Young, T. (2014) 'How many testers are needed to assure the usability of medical devices?'. Expert Review of Medical Devices, 5 (5). pp. 513 - 525. ISSN: 1745-2422 Open Access Link
Gallear, D., Ghobadian, A. and He, Q. (2014) 'The mediating effect of environmental and ethical behaviour on supply chain partnership decisions and management appreciation of supplier partnership risks'. International Journal of Production Research, 53 (21). pp. 6455 - 6472. ISSN: 0020-7543 Open Access Link
Algassem, F., Yang, Q. and Au, J. (2014) 'Application of lean six sigma principles to food distribution SMEs'. American Academic & Scholarly Research Journal, 6 (4). pp. 251 - 258.
del Pozo, S., Ribton, C. and Smith, DR. (2014) 'Characterisation of an RF Excited Argon Plasma Cathode Electron Beam Gun'.Tenth International Vacuum Electron Sources Conference. Russia, Saint-Petersburg. 4 - 4 July. IEEE. pp. 225 - 226.Open Access Link
Shamass, R., Alfano, G. and Guarracino, F. (2014) 'A numerical investigation into the plastic buckling paradox for circular cylindrical shells under axial compression'. Engineering Structures, 75. pp. 429 - 447. ISSN: 0141-0296 Open Access Link
Ivanov, A. and Rebecca Leese. (2014) 'Effect of degassing electrolyte on polarisation curve shape with the aim to apply knowledge to electrochemical machining'. The Journal of Innovation Impact, 7 (2). pp. 566 - 573.Open Access Link
QUE, Z-P., GU, J-H., SHIN, J-H. and LEE, J-H. (2014) 'Microstructure transition from stable to metastable eutectic growth in Ni–25%Al alloy'. Transactions of Nonferrous Metals Society of China, 24 (SUPPL. 1). pp. s106 - s111. ISSN: 1003-6326
Jaff, T. and Ivanov, A. (2014) 'Manufacturing Lead time Reduction towards Zero Defect Manufacturing'. The Journal of Innovation Impact, 7 (2). pp. 628 - 640.Open Access Link
Groenenboom, PHL., Campbell, J., Montañés, LB. and Siemann, M. (2014) 'Innovative SPH methods for aircraft ditching'. 11th World Congress on Computational Mechanics Wccm 2014 5th European Conference on Computational Mechanics Eccm 2014 and 6th European Conference on Computational Fluid Dynamics Ecfd 2014. pp. 4555 - 4566.
Lalpoor, M., Miroux, A., Mendis, CL., Hort, N. and Offerman, SE. (2014) 'The interaction of precipitation and deformation in a binary Mg–Ca alloy at elevated temperatures'. Materials Science and Engineering: A, 609. pp. 116 - 124. ISSN: 0921-5093
Swash, MR., Fernandez, JC., Aggoun, A., Abdulfatah, O. and Tsekleves, E. (2014) 'Reference based holoscopic 3D camera aperture stitching for widening the overall viewing angle'.2014 3DTV-Conference: The True Vision - Capture, Transmission and Display of 3D Video (3DTV-CON 2014). Budapest, HUNGARY. IEEE. pp. 1 - 3. ISSN: 2161-2021
Evans, MA., Campbell, RI. and Pei, E. (2014) 'Design Pedagogy Developments in Art and Design Education'. Ashgate Publishing, Ltd.. ISSN 10: 1472415981 ISSN 13: 9781472415981