IMM
Chen, X. and Cheng, K. (2026) 'AI-Enabled Axiomatic Design for MES-Level Process Parameters Optimization in Cloud-Based Manufacturing Execution Systems'. Machines, 14 (7). pp. 1 - 23.Open Access Link
Hussain, A., S. Maurya, H., Leščinskis, O., Goljandin, D., Sinka, M., Zhou, X., et al. (2026) 'Wood Ash Valorisation for Sustainable Materials: Circular Manufacturing, Characterization, Digital Modelling, and Industrial Applications'. Materials, 19 (14). pp. 1 - 35. ISSN: 1996-1944 Open Access Link
Shamseldein, A., Shamass, R. and Zhou, X. (2026) 'Performance of BFRP-reinforced concrete slabs exposed to elevated temperatures: an experimental and analytical study'. Magazine of Concrete Research, 78 (9-10). pp. 596 - 609. ISSN: 0024-9831
Dunić, V., Živković, M., Gubeljak, N. and Djordjevic, N. (2026) 'Numerical Modelling of Mechanical Properties for Metallic Materials'. Metals, 16 (7). pp. 1 - x.Open Access Link
Fan, Z. and Men, H. (2026) 'Solid/liquid interface energy and its anisotropy of pure metals'. Acta Materialia, 316. pp. 1 - 11. ISSN: 1359-6454 Open Access Link
Wang, Y., Li, Y., Zhou, X., Qu, S. and You, P. (2026) 'Study on Seismic Performance of Precast Hollow Wall Panel Connected by Embedded Steel Box Joints'. Advances in Civil Engineering, 2026 (1). pp. 1 - 16. ISSN: 1687-8086 Open Access Link
Papananias, M., Noh, Y. and Cheng, K. (2026) 'Intelligent Monitoring of Machining Processes using Gaussian Process Regression and On-Machine Comparator Measurement'.2026 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS). Kuala Lumpur, Malaysia. 26 - 27 June. Institute of Electrical and Electronics Engineers (IEEE). pp. 81 - 86. ISSN: 2995-2840 Open Access Link
Li, N., Wang, Q., Ji, S., Guo, N., Li, J., Niu, W., et al. (2026) 'Hierarchical gradient plasticity and strength-ductility synergy in thin-walled Al-Zn-Mg-Cu Alloy enabled by dual-sided laser shock peening'. Materials Science and Engineering: A, 972. pp. 1 - 19. ISSN: 0921-5093
Lawrie, JB. and Afzal, M. (2026) 'Higher mode filtering: optimum attenuation in a continuum of exceptional points'. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 482 (2340). pp. 1 - 28. ISSN: 1364-5021 Open Access Link
Khaleghi, M., Pashootanizadeh, F., Khaleghi, N., Sheykhivand, S., Danishvar, S. and Ghezavati, V. (2026) 'Smart Logistics Model for Supply Chain Management via Brain-Inspired Geometric Deep Networks'. Biomimetics, 11 (6). pp. 1 - 48.Open Access Link
Yang, Z., Wang, A., Wang, J., Zhu, M., Wen, T., Wang, J., et al. (2026) 'Microstructural heterogeneity-mediated strength-ductility synergy in a laminated CoCrNi-TC4/CoCrNi alloy fabricated by laser powder bed fusion'. Journal of Alloys and Compounds, 1075. pp. 1 - 14. ISSN: 0925-8388
Huang, L., Islam, T., Miron, A., Hone, K. and Li, Y. (2026) 'Automated radiology report generation: A comprehensive review'. Expert Systems with Applications, 331 (Part C). pp. 1 - 41. ISSN: 0957-4174 Open Access Link
Jin, K., Wang, D., Bi, W. and Zhou, X. (2026) 'Freezing-thawing resistance of magnesium oxysulfate (MOS) cement with granite powders'. Emerging Materials Research, 0 (ahead of print). pp. 1 - 11. ISSN: 2046-0147
Qin, J., Pei, E. and Cifter, A. (2026) 'A hierarchical and ontology-based taxonomy of stimuli–smart materials–transformation effects in 4D printing as a new interactive modality'.DRS2026: Edinburgh. Edinburgh, UK. 8 - 12 June. Design Research Society. pp. 1 - 21. ISSN: 2398-3132 Open Access Link
Bhardwaj, M., Chong, TP., Chaitanya, P. and Joseph, P. (2026) 'A Simple Phase Synchronization Algorithm for Aeroacoustics Studies of Multi Propeller system'. Journal of Sound and Vibration, 642. pp. 1 - 7. ISSN: 0022-460X Open Access Link
Fang, C. and Cantor, B. (2026) 'Ab Initio Molecular Dynamics Study of An Equiatomic Twenty-Element High Entropy Amorphous Alloy'. High Entropy Alloys & Materials, 0 (ahead of print). pp. 1 - 14. ISSN: 2731-5819 Open Access Link
Dang, J., Qian, J., Zhang, W., Zhou, X., Zhao, J. and Xiao, J. (2026) 'Improving carbon sequestration and thermal conductivity of sustainable foamed concrete by porous biochar fines: Experiment and molecular dynamics simulation'. Journal of Building Engineering, 128. pp. 1 - 22. ISSN: 2352-7102
Tiwari, T., Gan, T-H. and Patel, JB. (2026) 'Data-Driven Optimization of Size-Aware T6 Heat Treatment Parameters for A356 Aluminum Alloy'. Metals, 16 (6). pp. 1 - 29.Open Access Link
Arzomand, K., Kalganova, T. and Rustell, M. (2026) 'HARF: A human–AI collaborative framework for cultural heritage reconstruction with expert-guided multi-platform generative AI and systematic prompt engineering'. Digital Applications in Archaeology and Cultural Heritage, 42. pp. 1 - 15. ISSN: 2212-0548 Open Access Link
Que, Z., Lathika, GG. and Negrea, RF. (2026) 'Revisiting solute-based grain refinement in pure and recycled Al alloys: Mechanistic insights into Al3(Sc,Ti) formation and recycling-resilient nucleation'. Journal of Alloys and Compounds, 1073. pp. 189040 - 189040. ISSN: 0925-8388
Jurković, D., Škec, L. and Alfano, G. (2026) 'Characterisation of rate-dependent mode-II adhesive debonding based on a novel load–displacement curve parametrisation'. Engineering Fracture Mechanics, 344. pp. 1 - 25. ISSN: 0013-7944 Open Access Link
Que, Z., Negrea, RF. and Fang, C. (2026) 'Development of Sustainable Mixed Recycled Wrought Aluminium Alloys with Modified Al3(Sc,Ti) for Improved Impurity Tolerance'. Materials Today Sustainability, 35. pp. 1 - 14. ISSN: 2589-2347 Open Access Link
Pei, E. and Lakomiec, M. (2026) 'Standardisation efforts of ISO/TC 261 “Additive Manufacturing” 27th Plenary Meeting of ISO/TC 261 “Additive Manufacturing”'. Progress in Additive Manufacturing, 11 (8). pp. 7713 - 7714. ISSN: 2363-9512
Li, N., Wang, Q., Yin, S., Ji, S., Wang, K., Niu, W. and et al. (2026) 'Harnessing non-isothermal annealing to unlock the microstructure-property nexus in solid-state additively manufactured age-hardenable aluminum alloy'. Additive Manufacturing, 125. pp. 1 - 18. ISSN: 2214-8604
Liu, Q., Dong, X-X., Han, W-J., Han, Q-X., Yang, H-L. and Ji, S-X. (2026) 'Effects of Fe content and natural aging on the microstructures and mechanical properties of recyclable heat treatment-free Al-7Si-0.3Mg die-cast alloys determined using machine learning'. Advances in Manufacturing, 0 (ahead of print). pp. 1 - 20. ISSN: 2095-3127
Que, Z., Niu, Z., Mendis, CL., Negrea, RF. and Fan, Z. (2026) 'Growth twins within (Al₃(Sc,Ti) + α-Al) eutectic cells enable novel grain refinement in recycled Al alloys'. Materials and Design, 267. pp. 1 - 9. ISSN: 0264-1275 Open Access Link
Lu, J-Z., Dou, K., Zhang, Y-J., Lordan, E., Jacot, A., Fan, Z. and et al. (2026) 'Mathematical modeling of grain fragmentation induced by flow shearing in high-pressure die casting of light alloys'. Transactions of Nonferrous Metals Society of China, 36 (4). pp. 1015 - 1025. ISSN: 1003-6326 Open Access Link
Fan, Q., Liu, L., Su, G., Zhang, C., Zhu, M. and Cheng, K. (2026) 'Investigation of Electrical Discharge Machining Micro Holes in CoCrFeNiZr₀.₅ Eutectic High Entropy Alloys'. Micromachines, 17 (5). pp. 1 - 15. ISSN: 2072-666X Open Access Link
Khandelwal, P., Negrea, RF., Nunn, J., Honan, S. and Ji, S. (2026) 'Optimum scandium addition in A356 cast alloys: alloy design, microstructural evolution and mechanical properties'. Materials and Design, 266. pp. 1 - 22. ISSN: 0264-1275 Open Access Link
Guo, D., Zhu, C., Bhagavath, S., Lambert-Garcia, R., Marussi, S., Majkut, M., et al. (2026) 'Influence of substrate microstructure on defect formation during Al alloy laser powder bed fusion'. Additive Manufacturing, 124. pp. 1 - 9. ISSN: 2214-8604 Open Access Link
Mirabdolazimi, N., Reihanian, M., Bagherpour, E., Mendis, CL., Rezvani, A., Valiev, RZ. and et al. (2026) 'Annealing-induced hardening in an ultrafine-grained Mg–Zn–Ca alloy processed by high pressure torsion'. Journal of Materials Research and Technology, 42. pp. 6742 - 6755. ISSN: 2238-7854 Open Access Link
Don Merenchige, UAW., Wang, B. and Ji, S. (2026) 'From corporate greenhouse gas inventories to design-relevant LCAs: an integrated framework for industrial decarbonization'. The International Journal of Life Cycle Assessment, 31 (5). pp. 1 - 26. ISSN: 0948-3349 Open Access Link
Fang, C. (2026) 'Multi-Scale Simulation of Metallic Materials (2nd Edition)'. MDPI. ISSN 13: 978-3-7258-7369-2 Open Access Link
Argalis, PP., Vitola, L., Puzule, L., Zhou, X., Sinka, M. and Bajare, D. (2026) 'Evaluating the binder performance and biocomposite applications of thermally reactivated wood-wool cement panel waste'. Scientific Reports, 16 (1). pp. 1 - 23. ISSN: 2045-2322 Open Access Link
Han, S., Han, L., Yang, N., Eskin, D. and Tzanakis, I. (2026) 'The influence of grain orientation on the fretting fatigue behaviour in aluminium alloys'. Tribology International, 222. pp. 1 - 11. ISSN: 0301-679X Open Access Link
Katchasuwanmanee, K., Pipatnawakit, S., Cheng, K. and Kerdphol, T. (2026) 'Intelligent Data-Driven Fuzzy Logic Control for Demand-Responsive Operation of Hybrid Geothermal Heat Pump Systems'. Energies, 19 (8). pp. 1 - 23.Open Access Link
Abdallah, S., Rees, DWA. and Fan, M. (2026) 'Impact of loading rate and elevated temperatures on the pull-out behaviour of inclined hooked-end steel fibres embedded in normal and high-strength concrete'. Construction and Building Materials, 525. pp. 1 - 20. ISSN: 0950-0618 Open Access Link
Cetin, Y., Karakurt, EM., Huang, Y., Yildizhan, Y. and Kaya, M. (2026) 'In-depth evaluation of biocompatibility of a porous titanium-zirconium binary alloy for potential bone implant'. Drug and Chemical Toxicology, 0 (ahead of print). pp. 1 - 12. ISSN: 0148-0545
Kalganova, T., Fernandez-Hart, T. and Knight, JC. (2026) 'Reduced Precision Online Training for Spiking Neural Networks'.Lecture Notes in Networks and Systems. London, UK. Springer Nature. pp. 1 - 19.Open Access Link
Kerolos, MD., Mahmoud, MM., Ivanov, A. and Karayiannis, TG. (2026) 'Influence of Surface Roughness on Nucleate Boiling and Critical Heat Flux of R-1233zd(E) at Varying Pressures'.The 11th World Congress on Momentum, Heat and Mass Transfer. Paris, France. 14 - 16 April. Avestia Publishing. pp. 1 - 2. ISSN: 2371-5316 Open Access Link
Feng, L., Dong, X., Wang, S., Cai, Q., Mi, H., Guo, W. and et al. (2026) 'Tailoring microstructure and mechanical properties of high-pressure die-cast Mg-RE-Gd alloys via trace Al additions'. Journal of Magnesium and Alloys, 17. pp. 1 - 18. ISSN: 2213-9567 Open Access Link
Yang, X., Nadendla, HB., Fang, C., Nishi, S., Matsuda, T., Kambara, M., et al. (2026) 'Ultrahigh strength magnesium via solidification of nanocolloid'. Nature Communications, 17 (1). pp. 1 - 11. ISSN: 2041-1723 Open Access Link
Moufti, M-A., Alhalabieh, T., Mohammad, K., Alfailakawi, T., Alshimmari, T., Sabouni, S. and et al. (2026) 'Developing an Artificial Intelligence Solution to Autosegment the Edentulous Maxillary Bone for Implant Planning'. European Journal of Dentistry, 0 (ahead of print). pp. 1 - 7. ISSN: 1305-7456 Open Access Link
Sadeghi, F., Barekar, N., Subroto, T., Shurkin, P., Scamans, G. and Barbatti, C. (2026) 'Analyzing the effect of Fe on the microstructure and mechanical properties of a AA6008 alloy'. European Journal of Materials, 6 (1). pp. 1 - 12.Open Access Link
Wen, T., Wang, J., Zhu, M., Wang, A., Ji, S., Liu, Z. and et al. (2026) 'Silicon-induced microstructure and fracture behaviour control in L-PBF fabricated Al-Mg2Si-Si alloys'. Materials Science and Engineering: A, 962. pp. 1 - 11. ISSN: 0921-5093
Zhang, Y., Xiang, M., Huang, Z. and Yang, Z. (2026) 'Preventive Dispatch Against Attack of Adjustable Load on Power System Frequency'. Protection and Control of Modern Power Systems, 11 (2). pp. 35 - 47. ISSN: 2367-2617 Open Access Link
Wang, S., Li, Y., Wang, B., Li, W., Cui, L., Wu, G., et al. (2026) 'Study on the mechanical state of inner surface crack tips at SA508-52M-316L dissimilar metal welded joint interfaces'. Engineering Fracture Mechanics, 339. pp. 1 - 17. ISSN: 0013-7944 Open Access Link
Liu, F., Liu, CF., Sun, YZ., Yi, JT., Zhou, XM. and Wang, LF. (2026) 'Determination of failure envelope for submarine pipeline in spatially variable clay'. Acta Geotechnica, 0 (ahead of print). pp. 1 - 16. ISSN: 1861-1125
Chen, C., Zhang, D., Lü, K. and Peng, J. (2026) 'Who to trust: Locals or tourists for different purchases'. Annals of Tourism Research, 118 (May 2026). pp. 1 - 13. ISSN: 0160-7383 Open Access Link
Wen, T-H., Yuen, TYP., Zhou, X., Tsai, P-Y. and Tsao, Y-W. (2026) 'An integrated FRP retrofit-and-optical fiber sensing scheme for out-of-plane strengthening and damage monitoring of masonry walls'. Journal of Building Engineering, 123. pp. 1 - 25. ISSN: 2352-7102
Jin, Y., Sun, Z., Chen, M., Zhou, X., Lu, L. and Chen, B. (2026) 'Predicting the printability of cementitious composites in 3D printing: Relevance between rheological protocols and structural deformation'. Journal of Building Engineering, 123. pp. 1 - 17. ISSN: 2352-7102