Hu, Y., Yang, Q. and Wei, P. (2009) 'Development of a novel virtual coordinate measuring machine'.IEEE Intrumentation and Measurement Technology Conference I2MTC '09. Singapore. 5 - 7 May. IEEE. pp. 230 - 233.Open Access Link

Tesch, K., Collins, MW., Karayiannis, TG., Atherton, MA. and Edwards, P. (2009) 'Heat and mass transfer in air-fed pressurised suits'. Applied Thermal Engineering, 29 (7). pp. 1375 - 1382. ISSN: 1359-4311 Open Access Link

Mogeritsch, JP., Ludwig, A., Eck, S., Grasser, M. and McKay, BJ. (2009) 'Thermal stability of a binary non-faceted/non-faceted peritectic organic alloy at elevated temperatures'. Scripta Materialia, 60 (10). pp. 882 - 885. ISSN: 1359-6462

Noh, Y., Segawa, M., Shimomura, A., Ishii, H., Solis, J., Takanishi, A. and Hatake, K. et al. (2009) 'Development of the airway management training system WKA-2 designed to reproduce different cases of difficult airway'.2009 IEEE International Conference on Robotics and Automation (ICRA). IEEE. pp. 3833 - 3838. ISSN: 1050-4729

Johnson, EAC., Bonser, RHC. and Jeronimidis, G. (2009) 'Recent advances in biomimetic sensing technologies'. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 367 (1893). pp. 1559 - 1569. ISSN: 1364-503X Open Access Link

Lockton, D., Harrison, D., Holley, T. and Stanton, NA. (2009) 'Influencing interaction: development of the design with intent method'.4th International Conference on Persuasive Technology. Claremont, CA. 26 - 29 April. ACM. pp. 1 - 8.Open Access Link

Cardoso, RP. and Yoon, JW. (2009) 'Stress Integration Method for a Nonlinear Kinematic/Isotropic Hardening Model and its Characterization Based on Polycrystal Plasticity'. International Journal of Plasticity, 25. pp. 1864 - 1710. ISSN: 1879-2154

Minton, T. and Au, J. (2009) 'Stability of friction stir welds at superplastic forming temperatures'.13th International Conference on Sheet Metal. Birmingham City Univ, Birmingham, ENGLAND. 6 - 8 April. Trans Tech Publications, Ltd.. pp. 117 - 125. ISSN: 1013-9826

Chong, TP., Joseph, PF. and Davies, POAL. (2009) 'Design and performance of an open jet wind tunnel for aero-acoustic measurement'. Applied Acoustics, 70 (4). pp. 605 - 614. ISSN: 0003-682X Open Access Link

Lee, YJ., Holland, R. and Ariyatum, B. (2009) 'Emotional branding for fashion concept stores through experience design'.The 2nd Tsinghua International Design Management Symposium. Beijing, China. [unpublished]

Cashell, KA., Elghazouli, AY. and Izzuddin, BA. (2009) 'Ultimate behavior of idealized composite floor elements at ambient and elevated temperature'. Fire Technology, 46 (1). pp. 67 - 89. ISSN: 0015-2684 Open Access Link

Tegze, G., Bansel, G., Toth, GI., Pusztai, T., Fan, ZY. and Granasy, L. (2009) 'Advanced operator splitting-based semi-implicit spectral method to solve the binary phase-field crystal equations with variable coefficients'. Journal of Computational Physics, 228 (5). pp. 1612 - 1623. ISSN: 0021-9991

Bauermeister, N. and Shaw, S. (2009) 'Finite-element approximation of non-Fickian polymer diffusion'. IMA Journal of Numerical Analysis, 30 (3). pp. 702 - 730. ISSN: 0272-4979

Rees, DWA. (2009) 'Descriptions of reversed yielding of a solid circular bar in torsion'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (3). pp. 557 - 571. ISSN: 0954-4062

Ariyatum, B., Holland, R., Sirisalee, P. and Prommin, D. (2009) 'Identifying strategic directions for design development of general hospital equipment for Thailand'. The Design Journal, 12 (1). pp. 69 - 93. ISSN: 1460-6925

Holland, R., Holt, C. and Ariyatum, B. (2009) 'Corporate identity and corporate branding: a case for integrating design'.The 2nd International UJ Faculty of Management Conference. Johannesburg, South Africa. [unpublished]

Abdullah, A., Shabgard, MR., Ivanov, A. and Shervanyi-Tabar, MT. (2009) 'Effect of ultrasonic-assisted EDM on the surface integrity of cemented tungsten carbide (WC-Co)'. The International Journal of Advanced Manufacturing Technology, 41 (3-4). pp. 268 - 280. ISSN: 0268-3768

Imbaby, M., Jiang, K. and Chang, I. (2009) 'A Soft Molding Process for Fabrication of Micromachine Parts from Stainless Steel Powder'. Advanced Engineering Materials, 11 (3). pp. 202 - 205. ISSN: 1438-1656

Bayandorian, I., Bian, Z., Xia, M., Zhang, H., Scamans, GM. and Fan, Z. (2009) 'Magnesium alloy strip produced by melt conditioned twin roll casting (MC-TRC) process'.Magnesium Technology Symposium 2009. San Francisco, CA. 15 - 19 February. MINERALS, METALS & MATERIALS SOC. pp. 363 - 368. ISSN: 1545-4150

Tzamtzis, S., Zhang, H., Liu, G., Wang, Y., Hari Babu, N. and Fan, Z. (2009) 'Melt conditioned high pressure die casting (MC-HPDC) of Mg-alloys'.Magnesium Technology Symposium 2009. San Francisco, CA. 15 - 19 February. MINERALS, METALS & MATERIALS SOC. pp. 91 - 96. ISSN: 1545-4150

Xia, M., Wang, Y., Li, H., Arumuganathar, S., Zuo, Y., Scamans, GM. and Fan, Z. et al. (2009) 'Refinement of solidification microstructure by MCAST process'.Magnesium Technology Symposium 2009. San Francisco, CA. 15 - 19 February. MINERALS, METALS & MATERIALS SOC. pp. 135 - 140. ISSN: 1545-4150

Grant, SB. (2009) 'Developing a market oriented culture - an aerospace case study'. International Journal of Services and Operations Management, 5 (2). pp. 209 - 232. ISSN: 1744-2370

Atamanenko, TV., Katgerman, L. and Eskin, DG. (2009) 'Influence of ultrasonic melt treatment on structure formation in aluminium alloys with high amount of transition metals'.Technical Session on Light Metals 2009 held at the 138th TMS Annual Meeting. San Francisco, CA. 15 - 19 February. MINERALS, METALS & MATERIALS SOC. pp. 827 - 830. ISSN: 0147-0809

Fern, G., Silver, J., Withnall, R., Harrison, D. and Evans, P. (Accepted) 'Phosphor Electroluminescent Devices'.

Zhang, YS., Sun, W., Li, ZJ. and Zhou, X. (2009) 'Geopolymer extruded composites with incorporated fly ash and polyvinyl alcohol short fiber'. ACI Materials Journal, 106 (1). pp. 3 - 10. ISSN: 0889-325X

Moghaddam, MF. and Mousavi, A. (2009) 'Prediction and Control of Response Rate to Surveys'. American Journal of Mathematical and Management Sciences, 29 (3-4). pp. 337 - 370. ISSN: 0196-6324

MENDIS, C., OHISHI, K., KAWAMURA, Y., HONMA, T., KAMADO, S. and HONO, K. (2009) 'Precipitation-hardenable Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr (at.%) wrought magnesium alloy'. Acta Materialia, 57 (3). pp. 749 - 760. ISSN: 1359-6454

Abbott, M., Holland, R., Giacomin, J. and Shackleton, J. (2009) 'Changing affective content in brand and product attributes'. Journal of Product and Brand Management, 18 (1). pp. 17 - 26. ISSN: 1061-0421 Open Access Link

Winter, M. and Wei, J. (2009) 'Spikes for the Gierer-Meinhardt system with variable coefficients'.26th Kyushu Symposium on Partial Differential Equations. Kyushu University, Fukuoka, Japan. 26 - 28 January. [unpublished]

Turchin, AN., Eskin, DG. and Katgerman, L. (Accepted) 'Unsteady-State Solidification under Forced Flow Conditions', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 991 - 994.

Stangeland, A., Mo, A. and Eskin, DG. (Accepted) 'Constitutive Equation for Thermal Strain in the Mushy Zone during Solidification of Aluminium Alloys', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 343 - 348.

Fan, Z., Ji, S. and Liu, GJ. (Accepted) 'Development of the Rheo-Diecasting Process for Mg-Alloys', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 405 - 412.

Atamanenko, TV., Eskin, DG. and Katgerman, L. (Accepted) 'Experimental Study of Grain Growth in Aluminium Melts under the Influence of Ultrasonic Melt Treatment', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 987 - 990.

Ruvalcaba, D., Eskin, DG. and Katgerman, L. (Accepted) '3D Microstructure Development during Unconstrained Solidification of Aluminum Alloys', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 1015 - 1018.

Eskin, DG. and Katgerman, L. (Accepted) 'Effect of Structure on Hot Tearing Properties of Aluminum Alloys', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 995 - 998.

Belov, NA., Cheverikin, VV., Eskin, DG. and Turchin, AN. (Accepted) 'Effect of Al₃Ni and Mg₂Si Eutectic Phases on Casting Properties and Hardening of an Al-7% Zn-3% Mg Alloy', inMaterials Science Forum. Trans Tech Publications Ltd.. pp. 413 - 418. ISBN 10: 0878494081.

Shahverdi, H., Mares, C., Wang, W. and Mottershead, JE. (2009) 'Clustering of parameter sensitivities: examples from a helicopter airframe model updating exercise'. Shock and Vibration, 16 (1). pp. 75 - 87. ISSN: 1070-9622

Withnall, R., Silver, J., Ireland, TG., Fern, GR. and Marsh, PJ. (2009) 'Structure and morphology of ACEL ZnS:Cu,Cl phosphor powder etched by hydrochloric acid'. Journal of the Electrochemical Society, 156 (11). pp. J326 - J332. ISSN: 0013-4651 Open Access Link

Alfano, G., Bahtui, A. and Bahai, H. (2009) 'Numerical derivation of constitutive models for unbonded flexible risers'. International Journal of Mechanical Sciences, 51 (4). pp. 295 - 304. ISSN: 0020-7403 Open Access Link

Ingley, R., Smith, DR. and Holland, AD. (2009) 'Life testing of EMCCD gain characteristics'. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 600 (2). pp. 460 - 465. ISSN: 0168-9002

Ajovalasit, M. and Giacomin, J. (2009) 'Non-linear dependancy of the subjective perceived intensity of steering wheel rotational vibration'. International Journal of Industrial Ergonomics, 39 (1). pp. 58 - 67. ISSN: 0169-8141 Open Access Link

Zhou, L. and Cheng, K. (2009) 'Dynamic cutting process modelling and its impact on the generation of surface topography and texture in nano/micro cutting'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (3). pp. 247 - 266. ISSN: 0954-4054 Open Access Link

Smith, DR. and Gow, J. (2009) 'The effect of protons on the performance of swept-charge devices'. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 604 (1-2). pp. 177 - 179. ISSN: 0168-9002 Open Access Link

Fern, G., Ireland, T., Silver, J., Withnall, R., Michette, A., Mcfaul, C. and Pfauntsch, S. et al. (2009) 'Characterisation of Gd2O2S:Pr phosphor screens for water window X-ray detection'. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 600 (2). pp. 434 - 439. ISSN: 0168-9002

Fan, Z., Xia, M., Zhang, H., Liu, G., Patel, JB., Bian, Z., Bayandorian, I., Wang, Y., Li, HT. and Scamans, GM. et al. (2009) 'Melt conditioning by advanced shear technology (MCAST) for refining solidification microstructures'. International Journal of Cast Metals Research, 22 (1-4). pp. 103 - 107. ISSN: 1364-0461 Open Access Link

Zaffaina, L., Alain, R., Bonollo, F. and Fan, Z. (2009) 'New challenges and directions for high pressure die-cast magnesium'. La Metallurgia Italiana, March 2009 (3). pp. 25 - 29. ISSN: 0026-0843

Hay, GI., Southee, DJ., Evans, PSA., Harrison, DJ., Simpson, GB. and Wood, J. (2009) 'A time-strain monitoring system fabricated via offset lithographic printing'. Smart Materials and Structures, 18 (1). pp. 015015 - 015015. ISSN: 0964-1726 Open Access Link

Lawrie, JB. (2009) 'Orthogonality relations for fluid-structural waves in a three-dimensional, rectangular duct with flexible walls'. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 465 (2108). pp. 2347 - 2367. ISSN: 1471-2946 Open Access Link

Zhu, H., Lü, K. and Jin, R. (2009) 'A practical mandatory access control model for XML databases'. Information Sciences, 179 (8). pp. 1116 - 1133. ISSN: 0020-0255 Open Access Link

Haghayeghi, R., Zoqui, EJ. and Bahai, H. (2009) 'An investigation on the effect of intensive shearing on the grain refinement of A5754 aluminium alloy'. Journal of Alloys and Compounds, 481 (1-2). pp. 358 - 364. ISSN: 0925-8388