Gutt, R., Kohr, M., Mikhailov, SE. and Wedland, WL. (2017) 'On the mixed problem for the semilinear Darcy-Forchheimer-Brinkman PDE system in Besov spaces on creased Lipschitz domains'. Mathematical Methods in the Applied Sciences, 40 (18). pp. 7780 - 7829. ISSN: 0170-4214 Open Access Link

Ji, S. (2017) 'Revisit of Al-Si-Mg (Cu) cast alloys for gravity and high pressure die casting: Microstructure and mechanical properties'.Materials Science and Technology (MS&T17). Pittsburgh. 9 - 12 October.

Aicken, CRH., Sutcliffe, LJ., Gibbs, J., Tickle, LJ., Hone, K., Harding-Esch, EM., Mercer, CH., Sonnenberg, P., Sadiq, ST., Estcourt, CS. and Shahmanesh, M. et al. (2017) 'Using the eSexual Health Clinic to access chlamydia treatment and care via the internet: a qualitative interview study'. Sexually Transmitted Infections, 94 (4). pp. 241 - 247. ISSN: 1368-4973 Open Access Link

Silver, J., Harris, P. and Fern, G. (Accepted) 'Method for identifying plastics for recycling'.

Hosseini Kordkheili, SA., Momeni Massouleh, SH., Hajirezayi, S. and Bahai, H. (2017) 'Experimental identification of closely spaced modes using NExT-ERA'. Journal of Sound and Vibration, 412. pp. 116 - 129. ISSN: 0022-460X

Lam, B. and Choi, Y. (2017) 'Emerging Trends in Design Management Education in the UK'. Design Management Review, 28 (3). pp. 24 - 29. ISSN: 1948-7169 Open Access Link

Alsubaie, B. and Yang, Q. (2017) 'Maintenance Process Improvement Model by Integrating LSS and TPM for Service Organisations'.International QR2MSE2016 & WCEAM2016. Jiuzhaigou, China. 4 - 28 July. Springer International Publishing. pp. 13 - 24. ISSN: 2195-4356 Open Access Link

Yang, H., Cao, E., Lu, K. and Zhang, G. (2017) 'Optimal contract design for dual-channel supply chains under information asymmetry'. Journal of Business and Industrial Marketing, 32 (8). pp. 1087 - 1097. ISSN: 0885-8624 Open Access Link

Zhang, T., Gao, F. and Jiang, X. (2017) 'Surface topography acquisition method for double-sided near-right-angle structured surfaces based on dual-probe wavelength scanning interferometry'. Optics Express, 25 (20). pp. 24148 - 24148. ISSN: 1094-4087

DISSANAYAKE, M., HOWLADER, MO., SATTAR, TP., GAN, T-H. and PINSON, I. (2017) 'DEVELOPMENT OF A NOVEL CRAWLER BASED ROBOT FOR MOORING CHAIN CLIMBING'.CLAWAR 2017: 20th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. WORLD SCIENTIFIC. pp. 579 - 586.

Mohamed, FP., Siew, WH., Sheng, B. and Stewart, B. (2017) 'Effect of voltage reduction in minimising partial discharge activity in cables — Experimental study'.2017 IEEE Conference on Electrical Insulation and Dielectric Phenomenon (CEIDP). IEEE. pp. 331 - 334. ISSN: 0084-9162

Sheng, B., Mohamed, FP., Siew, WH. and Stewart, BG. (2017) 'MV cable lifetime improvement analysis through transformer tap changes'.2017 IEEE Conference on Electrical Insulation and Dielectric Phenomenon (CEIDP). IEEE. pp. 177 - 180. ISSN: 0084-9162

Goshvarpour, A., Abbasi, A., Goshvarpour, A. and Daneshvar, S. (2017) 'Discrimination between different emotional states based on the chaotic behavior of galvanic skin responses'. Signal, Image and Video Processing, 11 (7). pp. 1347 - 1355. ISSN: 1863-1703

Arvanaghi, R., Daneshvar, S., Seyedarabi, H. and Goshvarpour, A. (2017) 'CLASSIFICATION OF CARDIAC ARRHYTHMIAS USING ARTERIAL BLOOD PRESSURE BASED ON DISCRETE WAVELET TRANSFORM'. Biomedical Engineering: Applications, Basis and Communications, 29 (05). pp. 1750034 - 1750034. ISSN: 1016-2372

ANVO, R., SATTAR, TP., GAN, T-H. and PINSON, I. (2017) 'NON-DESTRUCTIVE TESTING ROBOTS (NDTBOTS) FOR IN-SERVICE STORAGE TANK INSPECTION'.CLAWAR 2017: 20th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. WORLD SCIENTIFIC. pp. 301 - 308.

Jayasree, NA., Airale, AG., Ferraris, A., Messana, A., Sisca, L. and Carello, M. (2017) 'Process analysis for structural optimisation of thermoplastic composite component using the building block approach'. Composites Part B: Engineering, 126. pp. 119 - 132. ISSN: 1359-8368

Konstantinova, J., Cotugno, G., Stilli, A., Noh, Y. and Althoefer, K. (2017) 'Object classification using hybrid fiber optical force/proximity sensor'.2017 IEEE SENSORS. IEEE. pp. 1 - 3. ISSN: 1930-0395

Lam, C., Noh, Y., Howard, M., Luo, S., Han, S. and Rhode, K. (2017) 'Human finger inspired grasping structure using tactile sensing array with single type optoelectronic sensor'.2017 IEEE SENSORS. IEEE. pp. 1 - 3. ISSN: 1930-0395

Giacomin, J. (2017) 'What Is Design For Meaning?'. Journal of Design, Business and Society, 3 (2). pp. 167 - 190. ISSN: 2055-2106 Open Access Link

Ren, F., Wang, J., Ge, H., Li, J., Hu, Q., Nadendla, H-B., Xia, M. and Li, J. et al. (2017) 'A Homogeneous Billet Layer Casting Fabrication Method'. Metallurgical and Materials Transactions A, 48 (10). pp. 4453 - 4457. ISSN: 1073-5623

Armillotta, A., Bellotti, M. and Cavallaro, M. (2017) 'Warpage of FDM parts: Experimental tests and analytic model'. Robotics and Computer-Integrated Manufacturing, 50. pp. 140 - 152. ISSN: 0736-5845 Open Access Link

Fang, CM. and van Huis, MA. (2017) 'Structure and stability of hcp iron carbide precipitates: A first-principles study'. Heliyon, 3 (9). pp. 1 - 15. ISSN: 2405-8440 Open Access Link

Huang, Y., Swash, MR. and Sadka, A. (2017) 'Innovative 3D pixal mapping method for LED holoscopic 3D display'.2017 4th International Conference on Signal Processing and Integrated Networks (SPIN). Amity Univ, Noida, INDIA. 25 - 3 February. IEEE. pp. 330 - 333.

Hosseini, S., Swash, MR. and Sadka, A. (2017) 'Immersive 360 Holoscopic 3D system design'.Signal Processing and Integrated Networks (SPIN), 2017. India. 25 - 3 February. IEEE. pp. 325 - 329.

Aondoakaa, AS., Swash, MR. and Sadka, A. (2017) '3D depth estimation from a holoscopic 3D image'.Signal Processing and Integrated Networks (SPIN), 2017. India. 25 - 3 February. IEEE. pp. 320 - 324.

Winter, M., Wei, J. and Yang, W. (2017) 'Stable spike clusters for the precursor Gierer-Meinhardt system in R2'. Calculus of Variations and Partial Differential Equations, 56 (6). pp. 142. ISSN: 0944-2669 Open Access Link

Dieringa, H., Katsarou, L., Buzolin, R., Szakács, G., Horstmann, M., Wolff, M., Mendis, C., Vorozhtsov, S. and StJohn, D. et al. (2017) 'Ultrasound assisted casting of an AM60 based metal matrix nanocomposite, its properties, and recyclability'. Metals, 7 (10). pp. 388 - 388. ISSN: 2075-4701 Open Access Link

Jouhara, H., Nannou, T., Anguilano, L., Krzyżyńska, R., Ghazal, H. and Spencer, N. (2017) 'Potentials of pyrolysis processes in the waste management sector'.1st International Conference on Sustainable Energy and Resource Use in Food Chains. Berkshire, UK. 20 - 20 April. Elsevier BV. pp. 87 - 94. ISSN: 1876-6102 Open Access Link

Mita, K., Miyatake, M., Atherton, M., Mares, C., Yoshimoto, S. and Stolarski, T. (2017) 'Non-contact Handling Equipment Utilising Ultrasonic Vibration'.World Tribology Congress. Beijing, China. 17 - 22 September.Open Access Link

Silver, J., Marsh, PJ., Fern, GR., Ireland, TG. and Salimian, A. (2017) 'ZnCdS:Cu,Al,Cl: A Near Infra-Red Emissive Family of Phosphors for Marking, Coding, and Identification'. JES Journal Solid State Science and Technology, 7 (1). pp. R3057 - R3063. ISSN: 2162-8769 Open Access Link

Fang, CM., Mohammadi, V., Nihtianov, S. and Sluiter, MHF. (2017) 'Stability, local structure and electronic properties of borane radicals on the Si(1 0 0)'. Computational Materials Science, 140. pp. 253 - 260. ISSN: 0927-0256 Open Access Link

Dong, W., Zhou, X. and Yuan, W. (2017) 'Influence of Specimen Geometry and Boundary Condition on Cracking of Concrete in Restrained Elliptical Ring Test'.2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures (EAC02). Brussels, Belgium. 14 - 14 September.

Winful, DA., Cashell, KA., Afshan, S., Barnes, AM. and Pargeter, RJ. (2017) 'Material properties of high strength steel under fire conditions'.EUROSTEEL 2017. Copenhagen, Denmark. 13 - 15 September. Wiley. pp. 2668 - 2677. ISSN: 2509-7075 Open Access Link

Winful, DA., Afshan, S., Cashell, KA., Barnes, AM. and Pargeter, RJ. (2017) 'Flexural buckling behaviour of high strength steel columns under fire conditions'.EUROSTEEL 2017. Copenhagen, Denmark. 13 - 15 September. Wiley. pp. 1 - 9. ISSN: 2509-7075 Open Access Link

Zhou, X., Kastiukas, G. and Wang, Y. (2017) 'Testing Rheological Properties of Alkali-activated Cement using the Direct Shear Box Test'.37th Cement & Concrete Science Conference. University College London, UK. 12 - 12 September.

Kastiukas, G., Zhou, X. and Sulaiman, F. (2017) 'Energy Storing Aggregates from Construction and Demolition Waste'.37th Cement & Concrete Science Conference. University College London, UK. 11 - 12 September.

Areir, M., Xu, Y., Harrison, D. and Fyson, J. (2017) '3D printing of highly flexible supercapacitor designed for wearable energy storage'. Materials Science and Engineering: B, 226. pp. 29 - 38. ISSN: 0921-5107 Open Access Link

Al-Helal, K., Fan, Z. and Stone, I. (2017) 'Refinement and Modification of Silicon Phases in Solidification of High Purity Hypereutectic Al-15si Alloy'.Liquid Metal Processing & Casting Conference 2017. Philadelphia, Pennsylvania, USA. 10 - 13 September. Proceedings of the Liquid Metal Processing & Casting Conference 2017. pp. 281 - 286.Open Access Link

Atherton, M., Jiang, P., Harrison, D. and Malizia, A. (2017) 'Design for invention: annotation of Functional Geometry Interaction for representing novel working principles'. Research in Engineering Design, 29 (2). pp. 245 - 262. ISSN: 0934-9839 Open Access Link

Mikhailov, S. and Portillo, CF. (2017) 'A New Family of Boundary-Domain Integral Equations for the Mixed Exterior Stationary Heat Transfer Problem with Variable Coefficient', in Constanda, C., Dalla Riva, M., Lamberti, PD. and Mosolino, P. (eds.) Integral Methods in Science and Engineering, Volume 1 Theoretical Techniques. Birkhäuser. , 1. pp. 215 - 226. ISBN 10: 3319593846. ISBN 13: 9783319593838.

Ayele, TG., Dufera, TT. and Mikhailov, S. (2017) 'Analysis of Boundary-Domain Integral Equations for Variable-Coefficient Neumann BVP in 2D', in Constanda, C., Dalla Riva, M., Lamberti, PD. and Musolino, P. (eds.) Integral Methods in Science and Engineering, Volume 1 Theoretical Techniques. Birkhäuser. , 1. pp. 21 - 33. ISBN 10: 3319593846. ISBN 13: 9783319593838. Open Access Link

Angulo, A., Allwright, J., Mares, C., Gan, T-H. and Soua, S. (2017) 'Finite Element Analysis of Crack Growth for Structural Health Monitoring of Mooring Chains using Guided Waves and Acoustic Emission'.2nd International Congress in Structural Integrity ICSI 2017. Funchal, Madeira, Portugal. 6 - 7 September. Elsevier BV. pp. 1 - 8. ISSN: 2452-3216 Open Access Link

Areir, M., Xu, Y., Harrison, D. and Fyson, J. (2017) 'A study of 3D printed flexible supercapacitors onto silicone rubber substrates'. Journal of Materials Science: Materials in Electronics, 28 (23). pp. 18254 - 18261. ISSN: 0957-4522 Open Access Link

Lam, B. (Accepted) 'Applying strategic design as a holistic approach to investigate and address real world challenges'. Strategic Design Research Journal, 10 (2).Open Access Link

Lam, B., Zamenopoulos, T., Kelemen, M. and Na, J. (2017) 'Unearth Hidden Assets through Community Co-design and Co-production'.The European Academy of Design. Rome. 6 - 14 April. Informa UK Limited. pp. S3601 - S3610. ISSN: 1460-6925 Open Access Link

Na, J., Choi, Y., Walters, A., Lam, B. and Green, S. (2017) 'Creating a Tool for Measuring the Social Value of Design'.Design for Next: 12th EAD Conference. Rome. 6 - 14 April. Informa UK Limited. pp. 1662 - 1672. ISSN: 1460-6925 Open Access Link

Ren, Y., Cheng, W., Wang, Y. and Wang, B. (2017) 'Analysis of flexural behavior of a simple supported thin beam under concentrated multiloads using trigonometric series method'. Thin-Walled Structures, 120. pp. 124 - 137. ISSN: 0263-8231 Open Access Link

Yasseri, SF., Bahai, H. and Mahani, RB. (2017) 'Inspection planning of offshore steel jacket structures for fatigue damage'. International Journal of Offshore and Polar Engineering, 27 (3). pp. 252 - 259. ISSN: 1053-5381

Rahmati, MT., Norouzi, S., Bahai, H. and Alfano, G. (2017) 'Experimental and numerical study of structural behavior of a flexible riser model'. Applied Ocean Research, 67. pp. 162 - 168. ISSN: 0141-1187

Wang, L., Yang, L., Zhang, D., Xia, MING-XU., Wang, YUN., Chen, B. and Li, J-G. et al. (2017) 'Nucleation interface of Al−Sb alloys on single crystal Al2O3 substrate'. Transactions of Nonferrous Metals Society of China, 27 (9). pp. 2104 - 2111. ISSN: 1003-6326

Fan, Q., Cheng, K., Cao, Y. and Huang, L. (2017) 'Cathode design for precision electrochemical machining of straight teeth face gear'.2017 23rd International Conference on Automation and Computing (ICAC). IEEE. pp. 1 - 5.