IMM
Zhang, Y., Ji, S., Scamans, G. and Fan, Z. (2016) 'Interfacial characterisation of overcasting a cast Al-Si-Mg (A356) alloy on a wrought Al-Mg-Si (AA6060) alloy'. Journal of Materials Processing Technology, 243 (May 2017). pp. 197 - 204. ISSN: 0924-0136 Open Access Link
Bolzoni, L., Xia, M. and Nadendla, H. (2016) 'Formation of equiaxed crystal structures in directionally solidified Al-Si alloys using Nb-based heterogeneous nuclei'. Scientific Reports, 6 (1). pp. 39554. ISSN: 2045-2322 Open Access Link
Yao, R., Paradowska, A., Eren, E. and Wang, B. (2016) 'Challenges of Measuring Residual Stresses in Large Girth Welded Pipe Spools by Neutron Diffraction'.International Conference of Residual Stresses 2016. Materials Research Forum LLC. pp. 575 - 580. ISSN: 2474-395X Open Access Link
Daudin, R., Terzi, S., Lhuissier, P., Tamayo, J., Scheel, M., Hari Babu, N., et al. (2016) 'Particle-induced morphological modification of Al alloy equiaxed dendrites revealed by sub-second in situ microtomography'. Acta Materialia, 125 (15 February 2017). pp. 303 - 310. ISSN: 1359-6454 Open Access Link
Wan Ahmad, WMNI., De Coster, R. and Wan Ahmad, M. (2016) 'Healthcare innovation and performance factors for telemedicine acceptance in Malaysia'.ISPIM Innovation Forum: Fostering Innovation Ecosystems. Toronto.Open Access Link
Dong, W., Wu, Z., Zhou, X. and Tan, Y. (2016) 'Experimental Studies on Void Detection in Concrete-filled Steel Tubes using Ultrasound'. Construction and Building Materials, 128. pp. 154 - 162. ISSN: 0950-0618 Open Access Link
Mousavi, A. and Siervo, HRA. (2016) 'Automatic translation of plant data into management performance metrics: a case for real-time and predictive production control'. International Journal of Production Research, 55 (17). pp. 4862 - 4877. ISSN: 0020-7543 Open Access Link
Grant, S. (2016) 'Classifying emerging knowledge sharing practices and some insights into antecedents to social networking: a case in insurance'. Journal of Knowledge Management, 20 (5). pp. 898 - 917. ISSN: 1367-3270 Open Access Link
Silver, J., Harris, P., Fern, G., Bonar, J., Valentine, G. and Gorton, S. (2016) 'Novel Approach to the Manufacture of MicroLED Colour Conversion Structures'.International Displays Workshop. Fukuoka, Japan. 8 - 9 December. 23rd International Display Workshops in Conjunction with Asia Display Idw AD 2016. pp. 1867 - 1870.Open Access Link
Silver, J., Harris, P., Fern, G., Kosier, E., Kay, M. and Mitchell, J. (2016) 'Plastic Packaging Recycling Using Intelligent Separation Technologies for Materials'.International Displays Workshop. Fukuoka, Japan. 7 - 9 December. Annual Technical Conference ANTEC Conference Proceedings. pp. 500 - 506.Open Access Link
Silver, J., Ireland, T., Fern, G. and Engelsen, D. (2016) 'Versatile Measuring Method of the Quantum Yield of Phosphor Systems with High and Low Photoluminescence'.23rd International Display Workshops in conjunction with Asia Display (IDW/AD'16). Fukuoka, Japan. 7 - 9 December. https://www.idw.or.jp/IDW16FP.pdf. pp. 1104 - 1107. ISSN: 1883-2490
Lawrie, JB. and Afzal, M. (2016) 'Acoustic scattering in a waveguide with a height discontinuity bridged by a membrane: a tailored Galerkin approach'. Journal of Engineering Mathematics, 105 (1). pp. 99 - 115. ISSN: 1573-2703 Open Access Link
Pinatti, IM., Ireland, TG., Fern, GR., Rosa, ILV. and Silver, J. (2016)
'Low temperature micro Raman and laser induced upconversion and downconversion spectra of europium doped silver tungstate Ag
Sreekumar, VM. and Eskin, DG. (2016) 'A new Al-Zr-Ti master alloy for ultrasonic grain refinement of wrought and foundry aluminum alloys'. Journal of Metals (JOM), 68 (12). pp. 3088 - 3093. ISSN: 1543-1851 Open Access Link
Bolzoni, L. and Nadendla, H. (2016) 'Engineering the heterogeneous nuclei in Al-Si alloys for solidification control'. Applied Materials Today, 5. pp. 255 - 259. ISSN: 2352-9407 Open Access Link
Lu, KJ. (2016) 'UNDERSTANDING AND PREDICTING ONLINE PURCHASE INTENTION: DEVELOPMENT OF A MODEL FOR COGNITIVEAFFECTIVE SHOPPER RESPONSES'. International Journal of Management and Applied Science, 2 (12). ISSN: 2394-7926 Open Access Link
Goshvarpour, A., Abbasi, A., Goshvarpour, A. and Daneshvar, S. (2016) 'A novel signal-based fusion approach for accurate music emotion recognition'. Biomedical Engineering Applications Basis and Communications, 28 (6). pp. 1650040 - 1650040. ISSN: 1016-2372
Noh, Y., Bimbo, J., Stilli, A., Wurdemann, H., Liu, H., Housden, J., et al. (2016) 'A new miniaturised multi-axis force/torque sensors based on optoelectronic technology and simply-supported beam'.2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Daejeon, SOUTH KOREA. 28 - 14 October. IEEE. pp. 202 - 207. ISSN: 2153-0858
Lindenroth, L., Back, J., Schoisengeier, A., Noh, Y., Würdemann, H., Althoefer, K. and et al. (2016) 'Stiffness-based modelling of a hydraulically-actuated soft robotics manipulator'.2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Daejeon, SOUTH KOREA. 28 - 14 October. IEEE. pp. 2458 - 2463. ISSN: 2153-0858
Chathuranga, DS., Wang, Z., Noh, Y., Nanayakkara, T. and Hirai, S. (2016) 'A soft three axis force sensor useful for robot grippers'.2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Daejeon, SOUTH KOREA. 28 - 14 October. IEEE. pp. 5556 - 5563. ISSN: 2153-0858
Bison, G., Pozzan, L. and Anguilano, L. (2016) 'Metallurgical evidence from a late antique context in the Forum of Grumentum'. Materials and Manufacturing Processes. pp. 1 - 9. ISSN: 1042-6914 Open Access Link
Rahimian, M., Ji, S., Fan, Z., Blake, P. and Watson, D. (Accepted) 'A casting alloy'.Open Access Link
Ji, S., Wang, Y. and Zhang, Y. (Accepted) 'Methods and process to improve the mechanical properties of cast aluminium alloys at ambient temperature and at elevated temperatures'.
Ji, S., Zhang, Y., Fan, Z. and Scamans, G. (Accepted) 'Overcasting for A356/A6062 hybrid structure'.
Gibbs, J., Gkatzidou, V., Tickle, L., Manning, SR., Tilakkumar, T., Hone, K., et al. (2016) '‘Can you recommend any good STI apps?’ A review of content, accuracy and comprehensiveness of current mobile medical applications for STIs and related genital infections'. Sexually Transmitted Infections, 93 (4). pp. sextrans-2016-052690 - sextrans-2016-052690. ISSN: 1368-4973 Open Access Link
Paz, R., Monzón, MD., González, B., Pei, E., Winter, G. and Ortega, F. (2016) 'Lightweight parametric optimisation method for cellular structures in additive manufactured parts'. International Journal for Simulation and Multidisciplinary Design Optimization, 7. pp. A6 - A6. ISSN: 1779-627X Open Access Link
Somthong, T. and Yang, Q. (2016) 'Average surface roughness evaluation using 3-source photometric stereo technique'. International Journal of Metrology and Quality Engineering, 7 (4). pp. 1 - 10. ISSN: 2107-6839 Open Access Link
Dong, W., Yang, D., Zhou, X., Kastiukas, G. and Zhang, B. (2016) 'Experimental and Numerical Investigations on Fracture Process Zone of Rock-Concrete Interface'. Fatigue and Fracture of Engineering Materials and Structures, 40 (5). pp. 820 - 835. ISSN: 8756-758X Open Access Link
Yang, W., Fredriksson, H. and Ji, S. (2016) 'Halo formation of Zn-Al alloys under conventional solidification and intensive convection solidification'. Journal of Alloys and Compounds, 696. pp. 460 - 469. ISSN: 0925-8388 Open Access Link
Noh, Y., Bimbo, J., Sareh, S., Wurdemann, H., Fraś, J., Chathuranga, DS., et al. (2016) 'Multi-Axis force/torque sensor based on Simply-Supported beam and optoelectronics'. Sensors (Switzerland), 16 (11). pp. 1936 - 1936. ISSN: 1424-8220 Open Access Link
Dong, W., Wu, Z., Zhou, X. and Huang, H. (2016) 'Experimental Study of Equal Biaxial-to-uniaxial Compressive Strength Ratio of Concrete at Early Ages'. Construction and Building Materials, 126. pp. 263 - 273. ISSN: 0950-0618 Open Access Link
Noh, Y., Liu, H., Sareh, S., Chathuranga, DS., Wurdemann, H., Rhode, K. and et al. (2016) 'Image-based optical miniaturized three-axis force sensor for cardiac catheterization'. IEEE Sensors Journal, 16 (22). pp. 7924 - 7932. ISSN: 1530-437X
Yang, W., Liu, L., Zhang, J. and Ji, S. (2016) 'Insight into the partial solutionisation of a high pressure die-cast Al-Mg-Zn-Si alloy for mechanical property enhancement'. Materials Science and Engineering A, 682. pp. 85 - 89. ISSN: 0921-5093 Open Access Link
Cheng, L., Kogia, M., Mohimi, A., Kappatos, V., Selcuk, C. and Gan, TH. (2016) 'Crack characterisation using invariable feature extraction in stainless steel specimen used for absorber tubes of CSP applications via EMAT'. Renewable Energy, 101. pp. 771 - 781. ISSN: 0960-1481 Open Access Link
Wei, J. and Winter, M. (2016) 'Stable spike clusters for the one-dimensional Gierer-Meinhardt system'. European Journal of Applied Mathematics, 28 (4). pp. 576 - 635. ISSN: 0956-7925 Open Access Link
Chang, I., Warnken, N., Liu, N. and Cantor, B. (2016) 'Mapping of phase field of FCC solid solution on CoCrFeMnNi high entropy alloy using diffusion couple approach'.International Conference on High-Entropy Materials. Taiwan. 6 - 9 November. Conference Proceedings.
Harrison, DJ., Xu, Y. and Zhang, R. (2016) 'Experimental Design to Optimise Electrical Performance of Strip Supercapacitors'. International Journal of Electrochemical Science,, 11 ((1)). pp. pp.675 - 684. ISSN: 1452-3981 Open Access Link
Sun, S., Bi, Y., Chen, M., Liu, D., You, C. and Huang, Y. (2016) 'Degradation mechanism of the biomedical Mg-3Zn-0.5Zr alloy in a simulated physiological environment containing different anions'. Xiyou Jinshu Cailiao Yu Gongcheng Rare Metal Materials and Engineering, 45 (11). pp. 2827 - 2834. ISSN: 1002-185X
Scamans, G. (2016) 'Clearing nad pretreatment of aluminum sheet to remove deformed surface layers'. Light Metal Age, 74 (6). pp. 12 - 18. ISSN: 0024-3345
Al-Helal, K., Stone, I. and Fan, ZY. (2016)
'Refinement of primary silicon crystals by novel P-doped γ-Al
Hussein, A. and Cheng, K. (2016) 'Development of the supply chain oriented quality assurance system for aerospace manufacturing SMEs and its implementation perspectives'. Chinese Journal of Mechanical Engineering (English Edition), 29 (6). pp. 1067 - 1073. ISSN: 1000-9345 Open Access Link
Dousty, M., Daneshvar, S. and Sotero, RC. (2016) 'Multifocus image fusion via the Hartley transform'.2016 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE). Vancouver, CANADA. 31 - 18 May. IEEE. pp. 1 - 5. ISSN: 0840-7789
Suthakar, U., Magnoni, L., Smith, DR., Khan, A. and Andreeva, J. (2016) 'An efficient strategy for the collection and storage of large volumes of data for computation'. Journal of Big Data, 3 (21).Open Access Link
Joshi, U. and Hari Babu, N. (2016) 'The grain refinement potency of bismuth in magnesium'. Journal of Alloys and Compounds, 695. pp. 971 - 975. ISSN: 0925-8388 Open Access Link
Liu, X., Li, R., Cheng, D. and Cheng, K. (2016) 'Investigation on the construction of the Relevance Vector Machine based on cross entropy minimization'.2016 22nd International Conference on Automation and Computing (ICAC). IEEE. pp. 233 - 237.
Florides, MM. and Cashell, KA. (2016) 'Numerical modelling of composite floor slabs subject to large defections'. Structures, 9. pp. 112 - 122. ISSN: 2352-0124 Open Access Link
Tavakoli, S., Gan, TH., Selcuk, C., Beysel, C. and Karasarlioǧlu, T. (2016) 'Fuel tank leakage detection based on acoustic emission'. Paris. 12 - 12 October. 13th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2016/MFPT 2016.Open Access Link
Peces, SM., Livadas, M., Selcuk, C., Gan, TH. and Mares, C. (2016) 'Ultrasonic guided waves propagation analysis under different load tension levels in multi-wire cables'.Thirteenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies. Paris, France. 12 - 12 October. 13th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2016/MFPT 2016.Open Access Link
Malo, S., Livadas, M., Selcuk, C., Gan, T-H. and Mares, C. (2016) 'Ultrasonic Guided Waves Propagation Analysis under Different Load Tension Levels in Multi-wire Cables'.CM 2016 and MFPT 2016 10-12 October 2016, Novotel Paris Sud, Porte de Charenton, Paris, France. Novotel Paris Sud, Porte de Charenton, Paris, France. 10 - 12 October.
Szabo, I., Sun, J., Selcuk, C. and Gan, TH. (2016) 'A new automated in line quality control system based on non-destructive evaluation for additive manufacturing of net-shape parts from particulates'.World PM2016 Congress & Exhibition. Hamburg, Germany. 9 - 13 October. World PM 2016 Congress and Exhibition.
Amirkhanlou, S., Ji, S., Zhang, Y., Watson, D. and Fan, Z. (2016)
'High modulus Al[sbnd]Si[sbnd]Mg[sbnd]Cu/Mg