Mottershead, JE., Mares, C. and Friswell, MI. (2000) 'Assignment of vibration nodes'. Proceedings of the International Modal Analysis Conference IMAC, 1. pp. 227 - 233. ISSN: 1046-6770

Mottershead, JE., Mares, C., Friswell, MI. and James, S. (2000) 'Model updating of an aluminum space-frame using different parameters sets'. Proceedings of the International Modal Analysis Conference IMAC, 1. pp. 576 - 583. ISSN: 1046-6770

Nakayama, K. and Qi, K. (2000) 'Uniaxial and biaxial stretching of PET sheets made from post consumed beverage bottles: Investigation of the structural and property modification induced by deformation'. Polymers and Polymer Composites, 8 (6). pp. 387 - 393. ISSN: 0967-3911

Qi, K. and Nakayama, K. (2000) 'Uni-axial drawing of sheets made from recycled PET flakes and poly(ε-caprolactone) blends'. Polymers and Polymer Composites, 8 (3). pp. 187 - 192. ISSN: 0967-3911

Niu, HJ. and Chang, ITH. (2000) 'Selective laser sintering of gas atomized M2 high speed steel powder'. Journal of Materials Science, 35 (1). pp. 31 - 38. ISSN: 0022-2461

Mikhailov, SE. (1999) 'Finite-dimensional perturbations of linear operators and some applications to boundary integral equations'. Engineering Analysis with Boundary Elements, 23 (10). pp. 805 - 813. ISSN: 0955-7997 Open Access Link

Peng, HX., Fan, Z. and Evans, JRG. (1999) 'Novel MMC microstructures prepared by melt infiltration of reticulated ceramic preforms'.7th International Conference on Metal Matrix Composites (MMC VII). LONDON, ENGLAND. 8 - 9 December. SAGE Publications. pp. 903 - 907. ISSN: 0267-0836

Aldrich, DE., Fan, Z. and Mummery, P. (1999) 'Processing, microstructure, and physical properties of interpenetrating AlO/Ni composites'.7th International Conference on Metal Matrix Composites (MMC VII). LONDON, ENGLAND. 8 - 9 December. SAGE Publications. pp. 747 - 752. ISSN: 0267-0836

Zhou, Z., Peng, HX., Fan, Z. and Li, DX. (1999) 'MMCs with controlled non-uniform distribution of submicrometre Al2O3 particles in 6061 aluminium alloy matrix'.7th International Conference on Metal Matrix Composites (MMC VII). LONDON, ENGLAND. 8 - 9 December. INST MATERIALS. pp. 908 - 912. ISSN: 0267-0836

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (1999) 'Microstructure and mechanical properties of in situ Al-Mg(2)Sicomposites'.7th International Conference on Metal Matrix Composites (MMC VII). LONDON, ENGLAND. 8 - 9 December. INST MATERIALS. pp. 913 - 918. ISSN: 0267-0836

Kalganova, T. and Miller, JF. (1999) 'Circuit layout evolution: An evolvable hardware approach'. IEE Colloquium Digest. pp. 3/4. ISSN: 0963-3308

Lochun, D., Kilitziraki, M., Jarrett, E., Green, S., Ramsey, B., Samuel, I. and Harrison, D. et al. (1999) 'Post-processing of conductive lithographic films for multilayer device fabrication'. Proceedings of the IEEE CPMT International Electronics Manufacturing Technology IEMT Symposium. pp. 287 - 293. ISSN: 1089-8190

Evans, PSA., Harrey, PM., Ramsey, BJ. and Harrison, DJ. (1999) 'Component attachment in lithographic film circuits'. Proceedings of the IEEE CPMT International Electronics Manufacturing Technology IEMT Symposium. pp. 282 - 286. ISSN: 1089-8190

Ji, S., Vuorinen, J. and Fan, Z. (1999) 'A comprehensive classification and coding system suitable for a computer integrated system in casting production'. International Journal of Casting Metals Research, 12 (1999). pp. 161 - 165.Open Access Link

Vignjevic, R. and Campbell, J. (1999) 'A penalty approach for contact in smoothed particle hydrodynamics'. International Journal of Impact Engineering, 23 (1). pp. 945 - 956. ISSN: 0734-743X

Ji, S., Vuorinen, JJ. and Fan, Z. (1999) 'A casting classification and coding system suitable for a CIMS in casting production'. International Journal of Cast Metals Research, 12 (3). pp. 161 - 165. ISSN: 1364-0461 Open Access Link

Mottershead, JE., Friswell, MI. and Mares, C. (1999) 'A method for determining model-structure errors and for locating damage in vibrating systems'. Meccanica, 34 (3). pp. 155 - 168. ISSN: 0025-6455

Macredie, RD. and Sandom, C. (1999) 'IT-enabled change: evaluating an improvisational perspective'. European Journal of Information Systems, 8 (4). pp. 247 - 259. ISSN: 0960-085X

Jing, X., Ireland, T., Gibbons, C., Barber, DJ., Silver, J., Vecht, A., Fern, G., Trowga, P. and Morton, DC. et al. (1999) 'Control of Y2O3: Eu spherical particle phosphor size, assembly properties, and performance for FED and HDTV'. Journal of The Electrochemical Society, 146 (12). pp. 4654 - 4658. ISSN: 0013-4651

Kang, H., Butler, C. and Yang, Q. (1999) ''.Photonics East '99. BOSTON, MA. 16 - 20 September. SPIE. pp. 202 - 209. ISSN: 0277-786X

Babu, NH., Rajasekharan, T., Menon, L. and Malik, SK. (1999) 'Infiltration‐Growth Processing of NdBa2Cu3O7‐delta Superconductor'. Journal of the American Ceramic Society, 82 (11). pp. 2978 - 2984. ISSN: 0002-7820

Bonser, RHC. and Dawson, C. (1999) 'The structural mechanical properties of down feathers and biomimicking natural insulation materials'. Journal of Materials Science Letters, 18 (21). pp. 1769 - 1770. ISSN: 0261-8028

Lakhany, AM. and Whiteman, JR. (1999) 'Superconvergent recovery based error estimators'. Mathematics and Computers in Simulation, 50 (1-4). pp. 97 - 114. ISSN: 0378-4754

Niu, HJ. and Chang, ITH. (1999) 'Instability of scan tracks of selective laser sintering of high speed steel powder'. Scripta Materialia, 41 (11). pp. 1229 - 1234. ISSN: 1359-6462

Ding, W., Ji, S. and Zhang, J. (1999) 'Application of CAD of Hot Box Die of Cylinder Head (in Chinese)'. China Foundry Machinery & Technology, 1999 (05). pp. 21 - 25.

Wan, L., Ji, S., Zhang, J., Wang, A., Ding, W. and Zhang, S. (1999) 'Application of CAD technology in developing hot box tools of cylinder head (in Chinese)'. China Foundry Machinery and Technology, 1999 (05). pp. 32 - 36. ISSN: 1672-6421

Babu, NH., Lo, W., Cardwell, DA. and Shi, Y. (1999) 'The effect of undercooling and Nd422 phase content on the nucleation of large Nd–Ba–Cu–O grains fabricated by top-seeded melt processing'. Journal of Materials Research, 14 (10). pp. 3859 - 3863. ISSN: 0884-2914

Smit, MA., Sykes, JM., Hunter, JA., Sharman, JDB. and Scamans, GM. (1999) 'Titanium based conversion coatings on aluminium alloy 3003'. Surface Engineering, 15 (5). pp. 407 - 410. ISSN: 0267-0844

Danilidis, I., Sykes, JM., Hunter, JA. and Scamans, GM. (1999) 'Manganese based conversion treatment'. Surface Engineering, 15 (5). pp. 401 - 405. ISSN: 0267-0844

Srivastava, D., Hu, D., Chang, ITH. and Loretto, MH. (1999) 'The influence of thermal processing route on the microstructure of some TiAl-based alloys'. Intermetallics, 7 (10). pp. 1107 - 1112. ISSN: 0966-9795

Huang, Y. and Humphreys, FJ. (1999) 'The effect of annealing temperature on the orientation dependence of boundary mobility in aluminium'.4th Inter Conf on Recrystallization and Related Phenomena. Tokyo, Japan. 21 - 24 September.

Silver, J., Fern, GR., Miller, JR., McCammon, CA., Evans, DJ. and Leigh, GJ. (1999) 'Effects of temperature and pressure on the Mossbauer spectra of models for the [4Fe-4S](2+) clusters of iron-sulfur proteins and the structure of [PPh4](2)[Fe4S4(SCH2 CO2C2H5)(4)]'. Inorganic Chemistry, 38 (19). pp. 4256 - 4261. ISSN: 0020-1669 Open Access Link

Ghobadian, A., Li, R., Gallear, D. and Merricks, P. (1999) 'Measuring supply chain performance - literature review and implications for further study'. Manchester, UK. 1 - 3 September. Proceedings of British Academy of Management Annual Conference.

Ghobadian, A., Gallear, D. and Liu, J. (1999) 'An examination of TQM implementation processes of benchmark organisations'. Manchester, UK. 1 - 3 September. Proceedings of British Academy of Management Annual Conference.

HUMPHREYS, FJ., HUANG, Y., BROUGH, I. and HARRIS, C. (1999) 'Electron backscatter diffraction of grain and subgrain structures — resolution considerations'.5th Workshop on Electron Backscatter Diffraction. UNIV OXFORD, OXFORD, ENGLAND. Wiley. pp. 212 - 216. ISSN: 0022-2720

Withnall, R., Silver, J., Fern, G. and Smalley, JW. (1999) 'Raman spectroscopy of the black pigmenting anaerobic bacterium porphyromonas gingivalis', in Greve, J. and Puppels, GJ. (eds.) Spectroscopy of biological molecules: New directions. Springer. pp. 573 - 574. ISBN 10: 0792358473. ISBN 13: 978-0792358473.

Golightly, D., Hone, KS. and Ritter, FE. (1999) 'Speech interaction can support problem solving'.International Conference on Human-Computer Interaction (INTERACT 99). EDINBURGH, SCOTLAND. 30 - 3 September. I O S PRESS. pp. 149 - 155.

Titler, PJ., Fern, G., Silver, J., Evans, DJ. and McCammon, CA. (1999) 'High pressure Mossbauer studies of [NEt4]2[Fe2S2Cl4], [NEt4]3[Fe2S2Cl4], [NEt4]3[Fe6S6Cl6]'.International Conference on the Applications of the Mossbauer Effect. Garmisch-Partenkirchen, Germany. 29 - 3 September. [unpublished]

Chiodo, JD., Billett, EH., Perkins, M., Harrison, DJ. and Anson, AW. (1999) 'Shape memory alloy actuators for ADSM of consumer electronic products'.International Symposium on Shape Memory Alloys: Fundamentals, Modeling and Industrial Applications held at the 38th Annual Conference of Metallurgists of CIM. Quebec City, Canada. 22 - 26 August. CANADIAN INST MINING, METALLURGY AND PETROLEUM. pp. 425 - 439.

Xie, T., Yang, Q., Au, Y-HJ. and Jones, BE. (1999) 'Modelling of a cone-jet sensor using finite element method'. Sensors and Actuators A: Physical, 76 (1-3). pp. 78 - 82. ISSN: 0924-4247

Fang, CM., de Groot, RA., Bischoff, MMJ. and van Kempen, H. (1999) 'Influence of a spin-polarized tip on the Fe(001) surface'. Surface Science, 436 (1-3). pp. L648 - L652. ISSN: 0039-6028

Niu, HJ. and Chang, ITH. (1999) 'Modeling the effect of porosity on ductile fracture of powder processed titanium alloy'. Scripta Materialia, 41 (5). pp. 481 - 486. ISSN: 1359-6462

Kalganova, T., Miller, JF. and Fogarty, TC. (1999) 'Evolution of the digital circuits with variable layouts'.Genetic and Evolutionary Computation Conference, GECCO'99. Orlando, Florida, USA. 13 - 17 July. Morgan Kaufmann Publishers. pp. 1235 - 1235.Open Access Link

Rees, DWA. and Clayton, A. (1999) 'Creep and recovery in bi-polymer composites'.5th International Conference on Flow Processes in Composite Materials. Plymouth, UK. 12 - 14 July. ADVANCED COMPOSITES MANUFACTURING CENTRE. pp. 171 - 178.

Grant, S. (1999) '‘‘Case Study Methodology Used on the UK Lean Aerospace Initiative’’'.Fourth International Symposium on Logistics. Florence, Italy - July 1999. [unpublished]

Cherry, C. and Macredie, RD. (1999) 'The Importance of Context in Information System Design: An Assessment of Participatory Design'. Requirements Engineering, 4 (2). pp. 103 - 114. ISSN: 0947-3602

Paul, RJ. and Macredie, RD. (1999) 'Guest Editorial: Managing Dynamic Requirements'. Requirements Engineering, 4 (2). pp. 63 - 64. ISSN: 0947-3602

Fang, CM., Groot, RAD., Bruls, RJ., Hintzen, HT. and With, GD. (1999) 'Ab initioband structure calculations of Mg₃N₂and MgSiN₂'. Journal of Physics: Condensed Matter, 11 (25). pp. 4833 - 4842. ISSN: 0953-8984

Atherton, MA., Bleakley, GJ., Doorly, DJ. and Colins, MW. (1999) 'Stents and their fluid dynamics: A comprehensive study involving design procedures and experimental work'.17th National Conference on Heat Transfer. Ferrara, Italy. 16 - 18 June. [unpublished]

Gilbert, JM., Elliner, GR., Key, PH., Snelling, HV., Harrison, D. and Harrey, P. (1999) 'Via and embedded resistor production in low cost lithographically printed substrates'.49th IEEE Electronic components and technology conference (ECTC). San Diego, CA, USA. 1 - 4 June. IEEE. pp. 160 - 166. ISSN: 0569-5503 Open Access Link

Huang, Y., Ridley, N., Humphreys, FJ. and Cui, J-Z. (1999) 'Diffusion bonding of superplastic 7075 aluminium alloy'. Materials Science and Engineering: A, 266 (1-2). pp. 295 - 302. ISSN: 0921-5093