IMM
Liu, Y. and Huang, Z. (2026) 'Semantic valued schema theory of genetic programming in symbolic regression'. Genetic Programming and Evolvable Machines, 27 (2). ISSN: 1389-2576
Ge, M., Guan, L., Wang, B. and Yang, Q. (2026) 'Fractional-order prescribed performance control of skid-steering mobile robots with uncertainties'. Journal of the Franklin Institute, 363 (15). pp. 108965 - 108965. ISSN: 0016-0032
Tatiana G. Kalganova. (Accepted) 'A Cross-Modal Deep Learning Framework for Real-Time Digital Identity Threat Detection in Intelligent Network Environments'. Babylonian Journal of Networking, 2026. pp. 26 - 31.
Kamel, KT., Shamass, R., Zhou, X., Rabi, M. and Shamseldein, A. (2026) 'Fresh and mechanical properties of concrete reinforced with novel wavy macro-basalt fibres for sustainable structural applications'. European Journal of Environmental and Civil Engineering, 30 (1). pp. 1 - 24. ISSN: 1964-8189
Ghafourian, M., Tsalidis, GA., Mousavi, A., Nika, C-E., Mino, E. and Katsou, E. (2026) 'Unveiling green and nature-based solutions through innovative economic assessment- a case for circular water management system'. Sustainable Futures, 12. pp. 1 - 13. ISSN: 2666-1888 Open Access Link
Silver, J., Taies, JA., Abu-Soud, HM. and Fern, G. (2026) 'Protoporphyrin IX iron(II) revisited. Overview of the Mössbauer spectroscopic parameters of low spin porphyrin iron(II) complexes Part II'. Journal of Biological Inorganic Chemistry, 0 (accepted, in press). pp. 1 - 24. ISSN: 0949-8257 Open Access Link
Jin, H., Zhou, S-M., Chen, H., Xie, Z-Y., Li, F., Li, Y., et al. (2026) 'A mechanism-constrained large language model-based intelligent diagnosis framework for bridge defects'. Engineering Structures, 367 (Part B). pp. 1 - 20. ISSN: 0141-0296
Shamseldein, A., Shamass, R., Zhou, X., Al-Noaimat, YA. and Kamel, KT. (2026) 'Enhancing Early-Age Strength of Low-Clinker Limestone Calcined Clay Cement Using Sodium Carbonate and Chemical Accelerators'. Buildings, 16 (17). pp. 1 - 21.Open Access Link
Wen, T., Wang, J., Zhu, M., Wang, A., Wang, S., Ji, S., et al. (2026) 'Transition from brittle to ductile fracture in an additively manufactured Al-Mg2Si-Si alloy via tailoring microstructural characteristics through annealing treatment'. Journal of Alloys and Compounds, 1080. pp. 190863 - 190863. ISSN: 0925-8388
Kamel, KT., Shamass, R., Zhou, X., Al-Noaimat, YA., Howkins, A. and Shamseldein, A. (2026) 'Towards Sustainable Concrete Infrastructure: Durability of Full-Scale BFRP Dowel Bars Under Seawater and Alkaline Exposure'. Buildings, 16 (17). pp. 1 - 23.Open Access Link
Sadeghi, F., Barekar, N., Subroto, T., Shurkin, P., Scamans, G. and Barbatti, C. (2026) 'Analyzing the Effect of Fe on the Microstructure and Mechanical Properties of a Fibrous AA6110 Alloy'. Metals and Materials International, 0 (ahead of print). pp. 1 - 17. ISSN: 1598-9623 Open Access Link
Arzomand, K. and Kalganova, T. (2026) 'Generalising HARF Beyond Bamiyan: A Bounded Cross-Site Evaluation of a Generative-AI Heritage Reconstruction Framework at the Temple of Bel, Palmyra'. Heritage, 9 (8). pp. 1 - 16.Open Access Link
Ali, TM., Manivannan, N. and Xu, Y. (Accepted) 'How is the use of AI in social media accepted by users and impacting human – computer interfacing in that area?'. International Journal of Business Humanities and Technology. ISSN: 2162-1357
Wang, S., Wang, Y., Wang, B., Li, W., Cui, L., Liu, S., et al. (2026) 'Effect of Crack Location on the Mechanical State at the Tip of Stress Corrosion Cracks in Dissimilar Metal Welded Joints'. Nuclear Technology, 0 (ahead of print). pp. 1 - 17. ISSN: 0029-5450 Open Access Link
DON MERENCHIGE, UAW. and JI, S. (2026) 'ASSESSING THE MATERIALITY OF VALUE-CHAIN EMISSIONS FOR ORGANIZATIONAL DECARBONIZATION STRATEGY DEVELOPMENT: A CASE STUDY OF THE AUTOMOTIVE INDUSTRY'. WIT Transactions on Ecology and the Environment, 1. pp. 377 - 381. ISSN: 1746-448X
Lü, K. and et al. (2026) 'Heterogeneous Information Network Analysis'. Springer.
Vivekanandam, V., Joshi, SS., Bagherpour, E. and Fan, Z. (2026) 'Electrical Resistivity as a Non-Destructive Technique for Fatigue Damage Detection in Aluminium Alloy 6082'. NDT — Journal of Non-Destructive Testing, 4 (3). pp. 1 - 11.Open Access Link
Jin, K., Xue, H., Hu, Z., Wang, H., Wang, W. and Zhou, X. (2026) 'Unlocking the role of Al(OH)3 in the evolution of mechanical properties of magnesium oxysulfate (MOS) cement'. Case Studies in Construction Materials, 25. pp. 1 - 17. ISSN: 2214-5095 Open Access Link
Chen, X. and Cheng, K. (2026) 'AI-assisted auditing review of mechanical engineering drawings: a Perception–Cognition–Collaboration reference architecture and its implementation Perspectives'. International Journal of Computer Integrated Manufacturing, 0 (ahead of print). pp. 1 - 22. ISSN: 0951-192X Open Access Link
Widgington, JJ., Ivanov, A. and Karayiannis, T. (2026) 'FLOW BOILING PRESSURE DROP IN A SINGLE MICROCHANNEL AND COMPARISON WITH CORRELATIONS'.18th International Heat Transfer Conference, IHTC18. Rio de Janeiro, Brazil. 2 - 7 August.Open Access Link
Jia, X., Li, Y., Li, C., Zhao, Y. and Huang, Z. (2026) 'Adaptive Fusion of CNN-Transformer for Superpixel Segmentation'. IEEE Sensors Letters, 10 (8). pp. 6007104 - 6007104.
Fang, C., Que, Z. and Fan, Z. (2026) 'First-principles Study on Silicon Stabilization of the Cubic α- and Hexagonal α’-FeAl Phases'. Metals, 16 (8). pp. 1 - 15.Open Access Link
Jin, K., Wang, H., Xue, H., Wang, D., Bi, W., Wang, W. and et al. (2026) 'Mechanistic insight of white carbon black in regulating hydration and improving water resistance of magnesium oxysulfate (MOS) cement'. Journal of Building Engineering, 130. pp. 1 - 20. ISSN: 2352-7102 Open Access Link
Jin, X., Noh, Y. and Ruiheng, W. (2026) 'Vision-based adaptive head motion measurement with inertial validation for reliable assistive interaction'. Measurement Science and Technology, 37 (32). pp. 326106 - 326106. ISSN: 0957-0233
Jaramillo, C., Aljoubory, J., Ng, KS., Qi, K., Fern, G. and Iacovidou, E. (2026) 'Life cycle assessment of virgin and recycled polypropylene kitchenware in the UK: impacts of domestic recycling, international supply chains, and consumer use'. Journal of Circular Economy, 0 (accepted, in press). pp. 1 - 37.Open Access Link
Lertnimanoradee, M., Lam, B. and Pei, E. (2026) 'The value of participatory co-design: a case study of upcycling in rural Thailand'. CoDesign, 0 (ahead of print). pp. 1 - 25. ISSN: 1571-0882 Open Access Link
Chen, X. and Cheng, K. (2026) 'AI-Enabled Axiomatic Design for MES-Level Process Parameters Optimization in Cloud-Based Manufacturing Execution Systems'. Machines, 14 (7). pp. 1 - 23.Open Access Link
Hussain, A., S. Maurya, H., Leščinskis, O., Goljandin, D., Sinka, M., Zhou, X., et al. (2026) 'Wood Ash Valorisation for Sustainable Materials: Circular Manufacturing, Characterization, Digital Modelling, and Industrial Applications'. Materials, 19 (14). pp. 1 - 35. ISSN: 1996-1944 Open Access Link
Shamseldein, A., Shamass, R. and Zhou, X. (2026) 'Performance of BFRP-reinforced concrete slabs exposed to elevated temperatures: an experimental and analytical study'. Magazine of Concrete Research, 78 (9-10). pp. 596 - 609. ISSN: 0024-9831
Dunić, V., Živković, M., Gubeljak, N. and Djordjevic, N. (2026) 'Numerical Modelling of Mechanical Properties for Metallic Materials'. Metals, 16 (7). pp. 1 - x.Open Access Link
Fan, Z. and Men, H. (2026) 'Solid/liquid interface energy and its anisotropy of pure metals'. Acta Materialia, 0 (in press, pre-proof). pp. 1 - 32. ISSN: 1359-6454 Open Access Link
Wang, Y., Li, Y., Zhou, X., Qu, S. and You, P. (2026) 'Study on Seismic Performance of Precast Hollow Wall Panel Connected by Embedded Steel Box Joints'. Advances in Civil Engineering, 2026 (1). pp. 1 - 16. ISSN: 1687-8086 Open Access Link
Papananias, M., Noh, Y. and Cheng, K. (2026) 'Intelligent Monitoring of Machining Processes using Gaussian Process Regression and On-Machine Comparator Measurement'.2026 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS). Kuala Lumpur, Malaysia. 26 - 27 June. Institute of Electrical and Electronics Engineers (IEEE). pp. 81 - 86. ISSN: 2995-2840 Open Access Link
Li, N., Wang, Q., Ji, S., Guo, N., Li, J., Niu, W., et al. (2026) 'Hierarchical gradient plasticity and strength-ductility synergy in thin-walled Al-Zn-Mg-Cu Alloy enabled by dual-sided laser shock peening'. Materials Science and Engineering: A, 972. pp. 1 - 19. ISSN: 0921-5093
Lawrie, JB. and Afzal, M. (2026) 'Higher mode filtering: optimum attenuation in a continuum of exceptional points'. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 482 (2340). pp. 1 - 28. ISSN: 1364-5021 Open Access Link
Khaleghi, M., Pashootanizadeh, F., Khaleghi, N., Sheykhivand, S., Danishvar, S. and Ghezavati, V. (2026) 'Smart Logistics Model for Supply Chain Management via Brain-Inspired Geometric Deep Networks'. Biomimetics, 11 (6). pp. 1 - 48.Open Access Link
Yang, Z., Wang, A., Wang, J., Zhu, M., Wen, T., Wang, J., et al. (2026) 'Microstructural heterogeneity-mediated strength-ductility synergy in a laminated CoCrNi-TC4/CoCrNi alloy fabricated by laser powder bed fusion'. Journal of Alloys and Compounds, 1075. pp. 1 - 14. ISSN: 0925-8388
Huang, L., Islam, T., Miron, A., Hone, K. and Li, Y. (2026) 'Automated radiology report generation: A comprehensive review'. Expert Systems with Applications, 331 (Part C). pp. 1 - 41. ISSN: 0957-4174 Open Access Link
Jin, K., Wang, D., Bi, W. and Zhou, X. (2026) 'Freezing-thawing resistance of magnesium oxysulfate (MOS) cement with granite powders'. Emerging Materials Research, 0 (ahead of print). pp. 1 - 11. ISSN: 2046-0147
Qin, J., Pei, E. and Cifter, A. (2026) 'A hierarchical and ontology-based taxonomy of stimuli–smart materials–transformation effects in 4D printing as a new interactive modality'.DRS2026: Edinburgh. Edinburgh, UK. 8 - 12 June. Design Research Society. pp. 1 - 21. ISSN: 2398-3132 Open Access Link
Bhardwaj, M., Chong, TP., Chaitanya, P. and Joseph, P. (2026) 'A Simple Phase Synchronization Algorithm for Aeroacoustics Studies of Multi Propeller system'. Journal of Sound and Vibration, 642. pp. 1 - 7. ISSN: 0022-460X Open Access Link
Fang, C. and Cantor, B. (2026) 'Ab Initio Molecular Dynamics Study of An Equiatomic Twenty-Element High Entropy Amorphous Alloy'. High Entropy Alloys & Materials, 0 (ahead of print). pp. 1 - 14. ISSN: 2731-5819 Open Access Link
Dang, J., Qian, J., Zhang, W., Zhou, X., Zhao, J. and Xiao, J. (2026) 'Improving carbon sequestration and thermal conductivity of sustainable foamed concrete by porous biochar fines: Experiment and molecular dynamics simulation'. Journal of Building Engineering, 128. pp. 1 - 22. ISSN: 2352-7102
Tiwari, T., Gan, T-H. and Patel, JB. (2026) 'Data-Driven Optimization of Size-Aware T6 Heat Treatment Parameters for A356 Aluminum Alloy'. Metals, 16 (6). pp. 1 - 29.Open Access Link
Arzomand, K., Kalganova, T. and Rustell, M. (2026) 'HARF: A human–AI collaborative framework for cultural heritage reconstruction with expert-guided multi-platform generative AI and systematic prompt engineering'. Digital Applications in Archaeology and Cultural Heritage, 42. pp. 1 - 15. ISSN: 2212-0548 Open Access Link
Cui, X., Zitoun, A. and Omairey, S. (2026) 'Environmental and Economic Analysis of Composite Manufacturing Process Using Innovative Photonic-Based Integrated Sensors'. Circular Economy and Sustainability, 0 (in submission). pp. 1 - 22. ISSN: 2730-597X Open Access Link
Que, Z., Lathika, GG. and Negrea, RF. (2026) 'Revisiting solute-based grain refinement in pure and recycled Al alloys: Mechanistic insights into Al3(Sc,Ti) formation and recycling-resilient nucleation'. Journal of Alloys and Compounds, 1073. pp. 189040 - 189040. ISSN: 0925-8388
Jurković, D., Škec, L. and Alfano, G. (2026) 'Characterisation of rate-dependent mode-II adhesive debonding based on a novel load–displacement curve parametrisation'. Engineering Fracture Mechanics, 344. pp. 1 - 25. ISSN: 0013-7944 Open Access Link
Que, Z., Negrea, RF. and Fang, C. (2026) 'Development of Sustainable Mixed Recycled Wrought Aluminium Alloys with Modified Al3(Sc,Ti) for Improved Impurity Tolerance'. Materials Today Sustainability, 35. pp. 1 - 14. ISSN: 2589-2347 Open Access Link
Li, N., Wang, Q., Yin, S., Ji, S., Wang, K., Niu, W. and et al. (2026) 'Harnessing non-isothermal annealing to unlock the microstructure-property nexus in solid-state additively manufactured age-hardenable aluminum alloy'. Additive Manufacturing, 125. pp. 1 - 18. ISSN: 2214-8604