Huo, D. and Cheng, K. (2007) 'Modelling and control of two-axis direct drive slides with application to nano/micro machining'. Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology Euspen 2007. pp. 81 - 84.

Coleman, AJ., McMurray, HN., Williams, G., Afseth, A. and Scamans, GM. (2007) 'Inhibition of Filiform Corrosion on AA6111-T4 Using In-Coating Phenylphosphonic Acid'. Electrochemical and Solid-State Letters, 10 (5). pp. C35 - C35. ISSN: 1099-0062

Kim, JS., Jiang, K., Falticeanu, CL., Davies, GJ. and Chang, ITH. (2007) 'Making Alumina Microcomponents From Al Powder'. Trans Tech Publications Ltd.. pp. 1041 - 1044. ISSN: 0255-5476

Falticeanu, CL., Chang, ITH., Kim, JS. and Cook, R. (2007) 'Sintering Behaviour of Al-Cu-Mg-Si Blends'. Trans Tech Publications Ltd.. pp. 597 - 600. ISSN: 0255-5476

Kim, JS., Chang, ITH., Falticeanu, CL., Davies, GJ. and Jiang, K. (2007) 'A Study of Debinding Behavior and Microstructural Development of Sintered Al-Cu-Sn Alloy'. Trans Tech Publications Ltd.. pp. 769 - 772. ISSN: 0255-5476

Cook, R., Chang, ITH. and Falticeanu, CL. (2007) 'Aluminium and Aluminium Alloy Powders for P/M Applications'. Trans Tech Publications Ltd.. pp. 773 - 776. ISSN: 0255-5476

Jiang, Z., Falticeanu, CL. and Chang, ITH. (2007) 'Warm Compression of Al Alloy PM Blends'. Trans Tech Publications Ltd.. pp. 333 - 336. ISSN: 0255-5476

Robson, JD., Prangnell, PB., McKay, BJ. and Heason, CP. (2007) 'Modelling the Precipitation of Al₃X Dispersoids in Aluminium Alloys and their Effect on Recrystallization'. Trans Tech Publications Ltd.. pp. 45 - 54. ISSN: 0255-5476

Zong, WJ., Li, D., Sun, T. and Cheng, K. (2007) 'Finite Element Method Predicts the Distribution of Cutting Temperature in Diamond Turning'. Trans Tech Publications, Ltd.. pp. 100 - 105. ISSN: 1013-9826

Yang, YH., Chen, SJ. and Cheng, K. (2007) 'Design and Control of a Piezo-Based Fast Tool Servo System for Precision Diamond Turning'. Trans Tech Publications Ltd.. pp. 195 - 199. ISSN: 1013-9826

Pelegrini, AV., Harrison, D. and Shackleton, J. (2007) 'Splitting and managing the solar spectrum for energy efficiency and daylighting'. Portugal Sb 2007 Sustainable Construction Materials and Practices Challenge of the Industry for the New Millennium. pp. 451 - 458.

Fang, CM., de Wijs, GA., Loong, C-K. and de With, G. (2007) 'Lattice and local-mode vibrations in anhydrous and protonized LiMn2O4 spinels from first-principles theory'. Journal of Materials Chemistry, 17 (46). pp. 4908 - 4908. ISSN: 0959-9428

Fang, CM., Ahuja, R. and Eriksson, O. (2007) 'Prediction of MAX phases, VN+1SiCN (N=1,2), from first-principles theory'. Journal of Applied Physics, 101 (1). ISSN: 0021-8979

Yang, Y., Chen, S., Cheng, K. and Sun, X. (2007) 'Diamond turning of microstructured surfaces: modelling and simulation'. International Journal of Nanomanufacturing, 1 (5). pp. 627 - 627. ISSN: 1746-9392

McKay, BJ., Robson, JD., Pragnell, PB. and Heason, CP. (2007) 'Modelling the precipitation of Al3X dispersoids in aluminium alloys and their effect on recrystallization'. Materials Science Forum, 550. pp. 45 - 54. ISSN: 0255-5476

Prangnell, PB., Huang, Y., Berta, M. and Apps, PJ. (2007) 'Mechanisms of Formation of Submicron Grain Structures by Severe Deformation'. Trans Tech Publications Ltd.. pp. 159 - 168. ISSN: 0255-5476

Pei, E., Evans, MA. and Campbell, RI. (2007) 'Them and Us?: Exploring the Collaboration between Industrial Designers and Engineering Designers'.Industrial Designers Society of America International Education Symposium. San Francisco.

Pei, E., Campbell, RI. and Evans, MA. (2007) 'Investigating Collaboration between Industrial designers and Engineering Designers: A Singapore Context'.International Conference on Manufacturing Automation. Singapore.

Du, Q., Eskin, DG. and Katgerman, L. (2006) 'Modelling macrosegregation during DC casting of a binary aluminium alloy'. Modeling of Casting Welding and Advanced Solidification Processes Xi, 1. pp. 235 - 242.

Silver, J., Withnall, R., Fern, GR., Marsh, PJ., Ireland, TG. and Salimian, A. (2006) 'Correlating the ACEL performance of phosphor powders ZnS:Cu,X(X = Cl, Br) with their charge trap characteristics'.13th International Display Workshop (IDW'06). Otsu, Japan. 6 - 8 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 421 - 422.

Wang, B., Zheng, J. and Shu, D. (2006) 'Dynamic strength and strain rate sensitivity of 37 wt% Pb 63 wt% Sn eutectic solders'.6th Asia-Pacific Symposium on Engineering Plasticity and its Applications (AEPA2002). UNIV SYDNEY, SYDNEY, AUSTRALIA. 6 - 8 December. Trans Tech Publications, Ltd.. pp. 181 - 186. ISSN: 1013-9826

Xu, Y. and Hutchings, IM. (2006) 'Cold spray deposition of thermoplastic powder'. Surface and Coatings Technology, 201 (6). pp. 3044 - 3050. ISSN: 0257-8972

Silver, J., Withnall, R., Marsh, PJ., Lipman, A., Ireland, T. and Fern, GR. (2006) 'High density packing of submicrometer spherical particles of the y 2O3: Eu3+ phosphor for low voltage FPDs'. Digest of Technical Papers SID International Symposium. pp. 648 - 651. ISSN: 0097-966X

Cheesewright, R. and Shaw, S. (2006) 'Uncertainties associated with finite element modelling of Coriolis mass flow meters'. Flow Measurement and Instrumentation, 17 (6). pp. 335 - 347. ISSN: 0955-5986

Silver, J., Withnall, R., Staple, A., Lipman, A., Ireland, T., Fern, GR., Harris, PG., English, RJ. and Heaton, JR. et al. (2006) 'Development of printable phosphor inks for high definition displays'. Digest of Technical Papers SID International Symposium. pp. 1275 - 1278. ISSN: 0097-966X

Hone, K. and Axelrod, L. (2006) 'Human factors evaluation of systems that recognise and respond to user emotion'. Contemporary Ergonomics 2006. pp. 208 - 212.

Mares, C. and Lockerby, D. (2006) 'Developing professional skills through group design projects and participation in student competitions'. Proceedings of the International Conference on Innovation Good Practice and Research in Engineering Education 2006 EE 2006. pp. 323 - 325.

Diamond, GG., Hutchins, DA., Gan, TH., Purnell, P. and Leong, KK. (2006) 'Single-sided capacitive imaging for NDT'. Insight - Non-Destructive Testing and Condition Monitoring, 48 (12). pp. 724 - 730. ISSN: 1354-2575

Chong, TP., Joseph, PF. and Davies, POAL. (2006) 'Design of a quiet open jet facility for the measurement of aerofoil noise'. Institute of Acoustics Spring Conference Futures in Acoustics 2006 Today S Research Tomorrow S Careers. pp. 149 - 158.

Mendis, CL., Muddle, BC. and Nie, JF. (2006) 'Characterization of intermetallic particles in a Mg–8Zn–4Al–0.5Ca (wt%) casting alloy'. Philosophical Magazine Letters, 86 (12). pp. 755 - 762. ISSN: 0950-0839

Fang, X., Patel, J. and Fan, Z. (2006) 'Microstructure and mechanical properties of rheo-diecast (RDC) aluminium alloys'. Institute of Cast Metals Engineers 67th World Foundry Congress Wfc06 Casting the Future. pp. 1109 - 1118.

Wang, Y., Liu, G. and Fan, Z. (2006) 'Mechanical properties and microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment'. Institute of Cast Metals Engineers 67th World Foundry Congress Wfc06 Casting the Future. pp. 295 - 304.

Zhang, SM., Zhen, Z. and Fan, Z. (2006) 'Direct Chill Rheocasting (DCRC) and extrusion of AZ31 Mg-Alloy'. Institute of Cast Metals Engineers 67th World Foundry Congress Wfc06 Casting the Future. pp. 1128 - 1137.

Rees, A., Dimov, SS., Ivanov, A., Herrero, A. and Uriarte, LG. (2006) 'Micro EDM: Accuracy of on-the-machine dressed electrodes', in Menz, W., Dimov, SS. and Fillon, B. (eds.) 4M 2006: Second International Conference on Multi-Material Micro Manufacture. Elsevier Science. pp. 361 - 364. ISBN 10: 0080452639. ISBN 13: 9780080452630.

Reza-Shabgard, M., Ivanov, A. and Rees, A. (2006) 'Influence of EDM machining on surface integrity of WC-Co', in Menz, W., Dimov, SS. and Fillon, B. (eds.) 4M 2006: Second International Conference on Multi-Material Micro Manufacture. Elsevier Science. pp. 331 - 334. ISBN 10: 0080452639. ISBN 13: 9780080452630.

Tavakoli, S. and Mousavi, A. (2006) 'Input variable monitoring for quick-response decision making in volatile systems'.Virtual Concept 2006. Cancun, Mexico. 26 - 1 December. Proceedings of Virtual Concept 2006.

Perry, MA., Bates, RA., Atherton, MA. and Oldfield, M. (2006) 'Analytical sensitivity analysis using COMSOL: Model development, validation and results'.COMSOL UK Users Conference. Birmingham. 16 [unpublished]

Giacomin, J. and Berber-Solano, TP. (2006) 'Effect of transient event frequency content and scale on the human detection of road surface type'.Joint Baltic-Nordic Acoustics Meeting. Gothenburg, Sweden. 8 - 10 November. BNAM.Open Access Link

Loong, C-K., Kolesnikov, AI., Koyanaka, H., Takeuchi, K. and Fang, C. (2006) 'Extraction of metals from natural waters: A neutron characterization of the nanostructured manganese-oxide-based adsorbents'. Physica B: Condensed Matter, 385-386. pp. 493 - 495. ISSN: 0921-4526

Ambat, R., Davenport, AJ., Scamans, GM. and Afseth, A. (2006) 'Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminium'. Corrosion Science, 48 (11). pp. 3455 - 3471. ISSN: 0010-938X

Rees, DWA. (2006) 'Forming properties of four high-strength sheet steels'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (11). pp. 1815 - 1825. ISSN: 0954-4054

Luo, P., Lü, K., Huang, R., He, Q. and Shi, Z. (2006) 'A heterogeneous computing system for data mining workflows in multi-agent environments'. Expert Systems: The Journal of Knowledge Engineering, 23 (5). pp. 258 - 272. ISSN: 1468-0394 Open Access Link

Rivière, B. and Shaw, S. (2006) 'Discontinuous Galerkin finite element approximation of nonlinear non-Fickian diffusion in viscoelastic polymers'. SIAM Journal on Numerical Analysis, 44 (6). pp. 2650 - 2670. ISSN: 0036-1429

Ariyatum, B., Unnanon, K., Nakngoenthong, J., Phuchamnong, A. and Soparat, J. (2006) 'Rapid moulding using an epoxy resin composite'.Asian Symposium on Materials and Processing (ASMP). Bangkok, Thailand. [unpublished]

Ariyatum, B., Unnanon, K., Nakngoenthong, J., Phuchamnong, A. and Soparat, J. (2006) 'Rapid moulding using the selective Laser Sintering (SLS) technique'.Asian Symposium on Materials and Processing (ASMP). Bangkok, Thailand. [unpublished]

Ivanov, A., Uriate, L., Herrero, A., Oosterling, H., Staemmler, L., Tang, PT. and Allen, D. et al. (2006) 'A comparison between microfabrication technologies for metal tooling'. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 220 (11). pp. 1665 - 1676. ISSN: 0954-4062

Gan, TH., Pallav, P. and Hutchins, DA. (2006) 'Non-contact ultrasonic quality measurements of food products'. Journal of Food Engineering, 77 (2). pp. 239 - 247. ISSN: 0260-8774

Mendis, CL., Bettles, CJ., Gibson, MA. and Hutchinson, CR. (2006) 'An enhanced age hardening response in Mg–Sn based alloys containing Zn'. Materials Science and Engineering: A, 435-436. pp. 163 - 171. ISSN: 0921-5093

Alfano, G. and Sacco, E. (2006) 'Combining interface damage and friction in a cohesive-zone model'. International Journal for Numerical Methods in Engineering, 68 (5). pp. 542 - 582. ISSN: 0029-5981 Open Access Link

Ji, S., Qian, M. and Fan, Z. (2006) 'The creep behaviour of rheo-diecast AZ91D (Mg-9Al-1Zn) alloy'. Materials Science and Engineering: A, 434 (1-2). pp. 7 - 12. ISSN: 0921-5093