Hunter, J. and Kalganova, T. (2001) 'Soft Computing in Investment Appraisal'. studies, 14. pp. 17 - 17.

Vignjevic, R. and Meo, M. (2001) 'Simulation of helicopter under-floor structure impact on water'. International Journal of Crashworthiness, 6 (3). pp. 425 - 443. ISSN: 1358-8265

She, FH., Chow, S., Wang, B. and Kong, LX. (2001) 'Identification and Classification of Animal Fibres Using Artificial Neural Networks'. Journal of Textile Engineering, 47 (2). pp. 35 - 38. ISSN: 1346-8235

MOTTERSHEAD, JE., MARES, C. and FRISWELL, MI. (2001) 'AN INVERSE METHOD FOR THE ASSIGNMENT OF VIBRATION NODES'. Mechanical Systems and Signal Processing, 15 (1). pp. 87 - 100. ISSN: 0888-3270

Fang, CM., Metselaar, R., Hintzen, HT. and de With, G. (2001) 'Application of First-Principles Methods for the Calculation of the Crystal and Electronic Structure of Oxynitrides'. Key Engineering Materials, 206-213 (II). pp. 1149 - 1152. ISSN: 1013-9826

Fang, CM., Orhan, E., de Wijs, GA., Hintzen, HT., de Groot, RA., Marchand, R., Saillard, J-Y. and de With, G. et al. (2001) 'The electronic structure of tantalum (oxy)nitrides TaON and Ta3N5'. Journal of Materials Chemistry, 11 (4). pp. 1248 - 1252. ISSN: 0959-9428

Mendis, CL., Muddle, BC. and Nie, JF. (2001) 'Enhanced precipitation hardening in Mg-Zn-Al casting alloys'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1207 - 1210.

Bourgeois, L., Mendis, CL., Muddle, BC. and Nie, HF. (2001) 'Characterisation of primary intermetallic phases in a Mg-Zn-Al casting alloy'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1203 - 1206.

Djoudi, MS. and Bahai, H. (2001) 'Relocation of natural frequencies using physical parameter modifications', inComputational Fluid and Solid Mechanics. Elsevier. pp. 146 - 149. ISBN 13: 9780080439440.

Lim, J., Jackson, PR., Yang, Q. and Jones, BE. (2001) 'Optically Powered Hydraulic Pilot Valve using Piezoelectric Multilayer Actuator'. International Journal of Fluid Power, 2 (3). pp. 15 - 21. ISSN: 1439-9776

Alfano, G. and Crisfield, MA. (2000) 'Numerical simulation of delamination in composites via interface elements'. European Congress on Computational Methods in Applied Sciences and Engineering Eccomas 2000.

McKay, BJ., Cizek, P., Schumacher, P. and O'Reilly, KAQ. (2000) 'Heterogeneous nucleation of α-Al in Al-Ni-Si alloys'. Light Metals Proceedings of Sessions TMS Annual Meeting Warrendale Pennsylvania. pp. 833 - 839. ISSN: 1096-9586

Natal Jorge, RM., Cardoso, RP. and Cesar de Sa, JMA. (2000) 'A quadrilateral mesh generator for adaptive procedures in bulk forming processes'. Engineering Computations, 17 (8). pp. 950 - 969. ISSN: 0264-4401

Mares, C., Mottershead, JE. and Friswell, MI. (2000) 'Selection and updating of parameters for the GARTEUR SM-AG19 testbed'. Proceedings of the 25th International Conference on Noise and Vibration Engineering ISMA. pp. 657 - 662.

Macredie,, RD. and Morar,, SS. (2000) 'Cognitive Issues in the Perception of Desktop Virtual Environments'. Journal of Intelligent Systems, 10 (5-6). pp. 421 - 450. ISSN: 0334-1860

Fern, GR., Silver, J., Withnall, R., Snowden, MJ. and Woodward, N. (2000) 'Oxygen activating biological sites modelled using novel colloidal co-polymer microgels'.SET for Britain.  [unpublished]

Katgerman, L. and Eskin, DG. (2000) 'Experimental study of linear shrinkage during solidification of binary and commercial aluminium alloys'.Continuous Casting. Frankfurt/Main. 13 - 15 November. Wiley-VCH. pp. 276 - 281.

Li, GQ., Ding, X. and Zhou, XM. (2000) 'Shaking Table Test Study on a Model of Steel-Concrete Hybrid Structure for Tall Buildings'.China-US Millennium Symposium on Earthquake Engineering. Beijing, China. 8 - 11 November. A A BALKEMA PUBLISHERS. pp. 377 - 381.

MOTTERSHEAD, JE., MARES, C., FRISWELL, MI. and JAMES, S. (2000) 'SELECTION AND UPDATING OF PARAMETERS FOR AN ALUMINIUM SPACE-FRAME MODEL'. Mechanical Systems and Signal Processing, 14 (6). pp. 923 - 944. ISSN: 0888-3270

Smith, PJ., Cardwell, DA., Babu, NH., Zhou, W. and Shi, Y-H. (2000) 'Properties of Y-Ba-Cu-O powder prepared by evaporative decomposition of solution for melt-processed bulk ceramics'. Superconductor Science and Technology, 13 (11). pp. 1526 - 1532. ISSN: 0953-2048

Harrison, D., Chalkey, A. and Billet, E. (2000) 'The rebound effect', in Birkland, J. (ed.) Designing eco solutions. Earthscan.

Cardwell, DA., Babu, NH., Kambara, M., Smith, PJ. and Shi, Y. (2000) 'Fabrication of large grain NdBaCuO by seeded melt growth'. Physica C: Superconductivity, 341-348. pp. 2297 - 2300. ISSN: 0921-4534

Li, G., Zhou, X. and Ding, X. (2000) 'Shaking Table Model Tests of a Steel-Concrete Hybrid High-rise Building'.16th National Symposium on High-rise Building Structures. Shanghai, China. 1 Proceedings of the 16th National Symposium on High-rise Building Structures. pp. 362 - 370.

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube oriented aluminium single crystals'.Materials Congress 2000. CIRENCESTER, ENGLAND. SAGE Publications. pp. 1367 - 1371. ISSN: 0267-0836

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube-oriented aluminium single crystals'. Materials Science and Technology, 16 (11-12). pp. 1367 - 1371. ISSN: 1316-2012

Gao, CH., Cheng, K. and Kirkwood, D. (2000) 'The investigation on the machining process of BTA deep hole drilling'. Journal of Materials Processing Technology, 107 (1-3). pp. 222 - 227. ISSN: 0924-0136

Jiang, Z., Cheng, K. and Harrison, DK. (2000) 'A concurrent engineering approach to the development of a scroll compressor'. Journal of Materials Processing Technology, 107 (1-3). pp. 194 - 200. ISSN: 0924-0136

Qiu, H., Cheng, K., Li, Y., Li, Y. and Wang, J. (2000) 'An approach to form deviation evaluation for CMM measurement of 2D curve contours'. Journal of Materials Processing Technology, 107 (1-3). pp. 119 - 126. ISSN: 0924-0136

Fang, CM., de Wijs, GA., de Groot, RA., Hintzen, HT. and de With, G. (2000) 'ChemInform Abstract: Bulk and Surface Electronic Structure of the Layered Sub‐Nitrides Ca₂N and Sr₂N.'. ChemInform, 31 (44). ISSN: 0931-7597

Dawson, A., Hinsley, SA., Ferns, PN., Bonser, RHC. and Eccleston, L. (2000) 'Rate of moult affects feather quality: a mechanism linking current reproductive effort to future survival'. Proceedings of the Royal Society of London. Series B: Biological Sciences, 267 (1457). pp. 2093 - 2098. ISSN: 0962-8452

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Effect of cooling rate on the microstructure of hypereutectic Al-Mg2Si alloys'. Journal of Materials Science Letters, 19 (20). pp. 1825 - 1828. ISSN: 0261-8028

Babu, NH., Lo, W. and Cardwell, DA. (2000) 'Influence of Undercooling and Nd₄Ba₂Cu₂O₁₀Content on the Growth Rate of Large‐Grain Bulk Nd‐Ba‐Cu‐O Superconductor'. Journal of the American Ceramic Society, 83 (10). pp. 2622 - 2624. ISSN: 0002-7820

Atherton, M., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents – I. Fundamentals of design procedures (abstract)'. Biomedicine & Pharmacotherapy, 54 (8-9). pp. 437 - 470. ISSN: 0753-3322

Atherton, M., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents – II. Planning of experiment (abstract)'. Biomedicine & Pharmacotherapy, 54 (8-9). pp. 437 - 470. ISSN: 0753-3322 Open Access Link

Niu, HJ. and Chang, ITH. (2000) 'Microstructural evolution during laser cladding of M2 high-speed steel'. Metallurgical and Materials Transactions A, 31 (10). pp. 2615 - 2625. ISSN: 1073-5623

Ji, S. and Fan, Z. (2000) 'Microstructural evolution of semisolid Sn-15wt%Pb alloy under high shear rate and high intensity of turbulence'.the 6th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Turin, Italy. 20 - 29 September. Edimet. pp. 723 - 729.

Frey, SD., Harrison, DJ. and Billett, EH. (2000) 'Environmental assessment of electronic products using LCA and ecological footprint'.International Congress and Exhibition on Electronics Goes Green 2000+: A Challenge for the Millenium. Berlin, GERMANY. 11 - 13 September. V D E - VERLAG GMBH. pp. 253 - 258.

Toussaint, J. and Cheng, K. (2000) 'Development of an Interactive Web-Based Design Support System for the Lubrication of Rolling Bearings'.ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers. pp. 807 - 814.

Cheng, K., Jiang, Z. and Harrison, DK. (2000) 'A Generic Integration Approach to the Design and Manufacture of Scroll Compressors'.ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers. pp. 913 - 919.

Wang, B. and Yang, M. (2000) 'Damping of honeycomb sandwich beams'. Journal of Materials Processing Technology, 105 (1). pp. 67 - 72. ISSN: 0924-0136

Djoudi, MS. and Bahai, H. (2000) 'Physical parameter modifications for specified frequencies'.5th International Conference on Computational Structures Technology/2nd International Conference on Engineering Computational Technology. Leuven, Belgium. 6 - 8 September. Civil-Comp Press. pp. 135 - 140. ISSN: 1759-3433

Djoudi, MS. and Bahai, H. (2000) 'A shell finite element for the general analysis of circular cylindrical shells'.5th International Conference on Computational Structures Technology/2nd International Conference on Engineering Computational Technology. Leuven, Belgium. 6 - 8 September. Civil-Comp Press. pp. 191 - 197. ISSN: 1759-3433

Humphreys, FJ. and Huang, Y. (2000) 'Grain boundary migration during recovery and the early stages of recrystallization'.21th Inter Symp on Materials Science: Recrystalliozation-Fundamental Aspects and Relations to Deformation Microstructure. Roskilde, Denmark. 5 - 5 September.

Fern, G., Silver, J., Withnall, R., Snowden, MJ. and Woodward, N. (2000) 'Modelling biologically active iron sites using colloidal copolymer microgels'.44th Meeting, Mossbauer Spectroscopy Discussion. The Royal Society of Chemistry, Greenwich. 4 - 5 September. [unpublished]

Peng, HX., Fan, Z. and Wang, DZ. (2000) 'In situAl₃Ti–Al₂O₃ intermetallic matrix composite: Synthesis, microstructure, and compressive behavior'. Journal of Materials Research, 15 (9). pp. 1943 - 1949. ISSN: 0884-2914

Martinez-Rubio, MI., Ireland, TG., Silver, J., Fern, G., Gibbons, C. and Vecht, A. (2000) 'Effect of EDTA on controlling nucleation and morphology in the synthesis of ultrafine Y2O3 : Eu phosphors'. Electrochem Solid St, 3 (9). pp. 446 - 449. ISSN: 1099-0062

Wang, B. and Yang, M. (2000) 'Damping of honeycomb sandwich beams'. Journal of Materials Processing Technology, 105 (1-2). pp. 67 - 72. ISSN: 0924-0136

Gilbert, JM., Elliner, GR., Key, PH., Harrey, P., Ramsey, B. and Harrison, D. (2000) 'Via and embedded resistor formation by matrix-assisted pulsed laser deposition'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214 (9). pp. 837 - 839. ISSN: 0954-4054

Xie, T., Yang, Q., Jones, BE. and Butler, C. (2000) 'Optimisation of air cone-jet sensor using 2-D finite element analysis'. Sensors and Actuators A: Physical, 85 (1-3). pp. 18 - 22. ISSN: 0924-4247

Bonser, RHC. and Dawson, C. (2000) 'The mechanical properties of down feathers from gentoo penguins (Pygoscelis papua)'. Journal of Zoology, 251 (4). pp. 545 - 547. ISSN: 0952-8369

Fang, CM., Parker, SC. and de With, G. (2000) 'Atomistic Simulation of the Surface Energy of Spinel MgAl₂O₄'. Journal of the American Ceramic Society, 83 (8). pp. 2082 - 2084. ISSN: 0002-7820