Niu, Z. and Cheng, K. (2019) 'Improved dynamic cutting force modelling in micro milling of metal matrix composites part II: Experimental validation and prediction'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (8). pp. 1500 - 1515. ISSN: 0954-4062

Li, L., Zhang, H., Guo, X., Zhou, X., Lu, L., Chen, M. and Cheng, X. et al. (2019) 'Pore structure evolution and strength development of hardened cement paste with super low water-to-cement ratios'. Construction and Building Materials, 227. pp. 117108 - 117108. ISSN: 0950-0618

Dhutti, A., Tumin, SA., Balachandran, W., Kanfoud, J. and Gan, T-H. (2019) 'Development of Ultrasonic Guided Wave Transducer for Monitoring of High Temperature Pipelines'. Sensors (Basel, Switzerland), 19 (24). pp. 1 - 16. ISSN: 1424-8220 Open Access Link

Fang, CM. and Fan, Z. (2019) 'Prenucleation at the Interface Between MgO and Liquid Magnesium: An Ab Initio Molecular Dynamics Study'. Metallurgical and Materials Transactions A, 51 (2). pp. 788 - 797. ISSN: 1073-5623 Open Access Link

Lacagnina, G., Chaitanya, P., Berk, T., Kim, J-H., Joseph, P., Ganapathisubramani, B., Hasheminejad, SM., Chong, TP., Stalnov, O., Choi, K-S., Shahab, MF., Omidyeganeh, M. and Pinelli, A. et al. (2019) 'Mechanisms of airfoil noise near stall conditions'. Physical Review Fluids, 4 (12). pp. 1 - 1. ISSN: 2469-990X Open Access Link

Kastiukas, G., Ruan, S., Unluer, C., Liang, S. and Zhou, X. (2019) 'Environmental Assessment of Magnesium Oxychloride Cement Samples: A Case Study in Europe'. Sustainability, 11 (24). pp. 6957 - 6957.Open Access Link

Kastiukas, G. and Zhou, X. (2019) 'Green Integrated Structural Elements for Retrofitting and New Construction of Buildings'.4th International Conference on Innovative Materials, Structures and Technologies (IMST). Riga, LATVIA. 5 - 27 September. IOP Publishing. pp. 012074 - 012074. ISSN: 1757-8981

Niu, Z. and Cheng, K. (2019) 'Investigation on the material removal and surface roughness in ultraprecision machining of Al/B4C/50p metal matrix composites'. International Journal of Advanced Manufacturing Technology, 105 (7-8). pp. 2815 - 2831. ISSN: 0268-3768 Open Access Link

Pei, E. (2019) 'Editorial PIAM October 2019'. Progress in Additive Manufacturing, 4 (4). pp. 355 - 356. ISSN: 2363-9512

Gao, Y., Xu, C., Yang, L. and Wang, B. (2019) 'Simulation study on the formation of plga micro-structure using hot-pressing method'. International Journal of Simulation Modelling, 18 (4). pp. 643 - 653. ISSN: 1726-4529 Open Access Link

Loukodimou, V., Kazilas, MC. and Skordos, AA. (2019) 'Simulation of damage on carbon fibre laminates using the Ladevèze material model'.18th European Conference on Composite Materials (ECCM-18). Athens, Greece. 1 - 28 June. Proceedings of the 18th European Conference on Composite Materials (ECCM-18). pp. 1 - 7.Open Access Link

Pouchias, A., Kazilas, M., Cunningham, P. and Stein, J. (2019) 'Development of a flexible dielectric sensor for flow monitoring of the liquid resin infusion process'. Sensors, 19 (23). pp. 5292 - 5292. ISSN: 1424-8220 Open Access Link

Zhang, R., Xu, Y., Harrison, D., Fyson, J. and Yang, Y. (2019) 'High-performance fibre supercapacitors based on ball-milled activated carbon nanoparticles mixed with pen ink'. Journal of Materials Science: Materials in Electronics, 30 (23). pp. 20881 - 20891. ISSN: 0957-4522

Cai, Q., Mendis, CL., Chang, ITH. and Fan, Z. (2019) 'Microstructure evolution and mechanical properties of new die-cast Al-Si-Mg-Mn alloys'. Materials and Design, 187. pp. 108394 - 108394. ISSN: 0264-1275 Open Access Link

Ivanov, A. and Cheng, K. (2019) 'Non-traditional and hybrid processes for micro and nano manufacturing'. International Journal of Advanced Manufacturing Technology, 105 (11). pp. 4481 - 4482. ISSN: 0268-3768 Open Access Link

Zhou, M., Jiang, L., Chen, S., Cardoso, RPR. and Usmani, A. (2019) 'Remaining fire resistance of steel frames following a moderate earthquake – A case study'. Journal of Constructional Steel Research, 164. pp. 105754 - 105754. ISSN: 0143-974X

Dong, X., Youssef, HY., Zhang, Y., Yang, H., Wang, S. and Ji, S. (2019) 'Advanced heat treated die-cast aluminium composites fabricated by TiB2 nanoparticle implantation'. Materials and Design, 186 (15 January 2020). pp. 1 - 13. ISSN: 0264-1275 Open Access Link

Liu, X., Wang, B. and Zhang, YH. (2019) 'Fatigue performance of welded joints under variable amplitude loading spectra'.ASME 2019 Pressure Vessels & Piping Conference. San Antonio, Texas, USA. 15 - 19 July. American Society of Mechanical Engineers. ISSN: 0277-027X Open Access Link

Kogo, B., Wang, B., Wrobel, L. and Chizari, M. (2019) 'Assessment of weld overlays in cladded piping systems with varied thicknesses'.International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2019. Glasgow. 11 - 14 June. American Society of Mechanical Engineers. ISSN: 2153-4772

Ajovalasit, M., Giacomin, J., Gkatzidou, V., Jenson Bennett, J. and Pettersson, I. (2019) 'Track 5.j Introduction: Innovation Through Design for Meaning'.Academy for Design Innovation Management Conference 2019. London, UK. 11 - 21 June. Conference proceedings of the Academy for Design Innovation Management: Research Perspectives In the era of Transformations. pp. 1162 - 1164. ISSN: 2632-0045 Open Access Link

Qin, R., Liu, Y., Swash, M., Li, M., Meng, H., Lei, T. and Chen, T. et al. (2019) 'A Fast Automatic Holoscopic 3D Micro-gesture Recognition System for Immersive Applications'.Advances in Natural Computation, Fuzzy Systems and Knowledge Discovery. ICNC-FSKD 2019. Yunnan, China. 7 - 22 July. Springer International Publishing. pp. 696 - 703. ISSN: 1860-0794 Open Access Link

Liang, CE., Vignjevic, R. and Hughes, K. (2019) 'Part Reduction of Hot Form Quench (HFQ) Automotive structural components'.LightMAT. Manchester, UK. 5 - 7 November.Open Access Link

Noh, Y., Lindenroth, L., Wang, S., Housden, RJ., Wingerden, A-SV., Li, W. and Rhode, K. et al. (2019) 'A 2-piece six-axis force/torque sensor capable of measuring loads applied to tools of complex shapes'.The 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2019). Macau, China. 3 - 8 November. IEEE. pp. 7976 - 7981. ISSN: 2153-0858 Open Access Link

Gu, YC., Peng, GS., Song, GS., Huang, J., Wang, Y. and Chen, SY. (2019) 'Comparative studies of grain refinement of commercial purity Mg by CaO and Ca addition'. International Journal of Cast Metals Research, 32 (5-6). pp. 295 - 303. ISSN: 1364-0461

Noh, Y., Lindenroth, L., Wang, S., Housden, RJ., Wingerden, ASV., Li, W. and Rhode, K. et al. (2019) 'A2-piece six-axis force/torque sensor capable of measuring loads applied to tools of complex shapes'.2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE. pp. 7976 - 7981. ISSN: 2153-0858

Wang, J. and Scamans, G. (2019) 'A simple measurement system for optimization of auto aluminum body sheet coil cleaning lines'. Light Metal Age, 77 (6). pp. 6 - 10. ISSN: 0024-3345

Bolzoni, L. and Hari Babu, N. (2019) 'On the grain refining efficacy of Ti-free hypoeutectic AlSi via AlTiB, AlB and AlNbB chemical inoculation'. Journal of Alloys and Compounds, 817. pp. 1 - 9. ISSN: 0925-8388 Open Access Link

Hobson, P. and Smith, D. (2019) 'A portable test-bench for real-time radiation damage measurements in scintillating and wavelength-shifting fibres'. [Poster] Exhibited at. 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference 30 10 2019

Amini, A., Kanfound, J. and Gan, T-H. (2019) 'An AI Driven Real-time 3-D Representation of an Off-shore WT for Fault Diagnosis and Monitoring'.ICAAI 2019: 2019 The 3rd International Conference on Advances in Artificial Intelligence. Istanbul, Turkey. 26 - 28 October. ACM. pp. 162 - 165.Open Access Link

Lais, H., Lowe, PS., Wrobel, LC. and Gan, T-H. (2019) 'Ultrasonic Transducer Array Performance for Improved Cleaning of Pipelines in Marine and Freshwater Applications'. Applied Sciences, 9 (20). pp. 1 - 19.Open Access Link

Lais, H., Lowe, PS., Wrobel, LC. and Gan, T-H. (2019) 'Investigation of Ultrasonic Sonotrode Design to Improve the Performance of Ultrasonic Fouling Removal'. IEEE Access, 7. pp. 148897 - 148912. ISSN: 2169-3536 Open Access Link

Zimmera, VA., Gomeza, A., Skeltona, E., Toussainta, N., Zhanga, T., Khanala, B., Wrighta, R., Noh, Y., Ho, A., Matthewa, J., Hajnala, JV. and Schnabela, JA. et al. (2019) 'Towards Whole Placenta Segmentation At Late Gestation Using Multi-View Ultrasound Images'.The 22nd International Conference on Medical Image Computing and Computer Assisted Intervention. Shenzhen, China. 13 - 17 October. Springer International Publishing. pp. 628 - 636. ISSN: 0302-9743 Open Access Link

Shu, W., Kawal, R., Harminder, G., Weifeng, W., Joao Filipe, F., Noh, Y., Sergio andres, U., Jesus, U., Julio, S., Ronak, R., Pablo, L. and Kawal, R. et al. (2019) 'Manufacturing of Ultrasound- and MRI-Compatible Aortic Valves Using 3D Printing for Analysis and Simulation'.STACOM: International Workshop on Statistical Atlases and Computational Models of the Heart. Shenzhen, China. 13 - 13 October. Springer International Publishing. pp. 12 - 21. ISSN: 0302-9743 Open Access Link

Gustafson-Pearce, O. and Grant, SB. (2019) 'The use of virtual environments for knowledge sharing in distance learning education, with a view to informing industry', inInformation Diffusion Management and Knowledge Sharing: Breakthroughs in Research and Practice. IGI Global. pp. 588 - 602. ISBN 13: 9781799804178.

Ao, W., Wei, J. and Winter, M. (2019) 'Stable spike clusters on a compact two-dimensional Riemannian manifold'. Journal of Differential Equations, 268 (7). pp. 3665 - 3704. ISSN: 0022-0396 Open Access Link

Lebon, B., Tzanakis, I., Pericleous, K. and Eskin, D. (2019) 'Numerical modelling of the ultrasonic treatment of aluminium melts: An overview of recent advances'. Materials, 12 (19). pp. 3262 - 3262. ISSN: 1996-1944 Open Access Link

Bozoni, L. and Hari Babu, N. (2019) 'Towards industrial Al-Nb-B master alloys for grain refining Al-Si alloys'. Journal of Materials Research and Technology, 8 (6). pp. 5631 - 5638. ISSN: 2238-7854 Open Access Link

Noh, Y., Han, S., Gawenda, P., Li, W., Sareh, S. and Rhode, K. (2019) 'A Contact Force Sensor based on S-shaped Beams and Optoelectronic Sensors for Flexible Manipulators for Minimally Invasive Surgery (MIS)'. IEEE Sensors Journal, 20 (7). pp. 3487 - 3495. ISSN: 1530-437X Open Access Link

Song, L., Cheng, K., Ding, H., Chen, S. and Gao, Q. (2019) 'Analysis of static and dynamic characteristics of spiral-grooved gas journal bearings in high speed'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233 (19-20). pp. 6774 - 6792. ISSN: 0954-4062

Yasseri, SF. and Bahai, H. (2019) 'Interface and integration management for FPSOs'. Ocean Engineering, 191. pp. 106441 - 106441. ISSN: 0029-8018

Albar, A., Swash, MR. and Ghaffar, S. (2019) 'The Design and Development of an Extrusion System for 3D Printing Cementitious Materials'.2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT). Ankara, Turkey. 1 - 13 October. IEEE.

Wu, C., Chen, S., Cheng, K. and Xiao, C. (2019) 'Investigation of strengthening effect on the machining rigidity in longitudinal torsional ultrasonic milling of thin-plate structures'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234 (3). pp. 665 - 670. ISSN: 0954-4054

Khrustalyov, AP., Kozulin, AA., Zhukov, IA., Khmeleva, MG., Vorozhtsov, AB., Eskin, D., Chankitmunkong, S., Platov, VV. and Vasilyev, SV. et al. (2019) 'Influence of Titanium Diboride Particle Size on Structure and Mechanical Properties of an Al-Mg Alloy'. Metals, 9 (10). pp. 1030 - 1030. ISSN: 2075-4701 Open Access Link

Khan, MA., Jiang, L., Cashell, KA. and Usmani, A. (2019) 'Virtual hybrid simulation of beams with web openings in fire'. Journal of Structural Fire Engineering, 11 (1). pp. 118 - 134. ISSN: 2040-2317 Open Access Link

Ghobadian, A. and Gallear, D. (2019) 'TQM and organization size', in Stupak, RJ. and Leitner, PM. (eds.) Handbook of Public Quality Management. London : Routledge. pp. 224 - 258. ISBN 13: 9780824704155.

Dong, X., Youssef, H., Zhang, Y., Wang, S. and Ji, S. (2019) 'High performance Al/TiB2 composites fabricated by nanoparticle reinforcement and cutting-edge super vacuum assisted die casting process'. Composites Part B: Engineering, 177 (15 November 2019). pp. 1 - 11. ISSN: 1359-8368 Open Access Link

Cashell, KA., Malaska, M., Khan, M., Alanen, M. and Mela, K. (2019) 'Numerical analysis of the behaviour of stainless steel cellular beam in fire'.Nordic Steel Construction Conference 2019. Copenhagen, Denmark. 16 - 20 September. Wiley. pp. 895 - 900. ISSN: 2509-7075 Open Access Link

Malaska, M., Cashell, K., Alanen, M., Mela, K. and Afshan, S. (2019) 'Experimental behaviour of stainless steel cellular beam in fire'.Nordic Steel Construction Conference 2019. Copenhagen, Denmark. 16 - 20 September. Wiley. pp. 901 - 906. ISSN: 2509-7075 Open Access Link

Omairey, SL., Dunning, PD. and Sriramula, S. (2019) 'Multiscale surrogate-based framework for reliability analysis of unidirectional FRP composites'. Composites Part B: Engineering, 173. pp. 106925 - 106925. ISSN: 1359-8368

Green, S., Page, F., De’Ath, P., Pei, E. and Lam, B. (2019) 'VUCA challenges on the design-engineering student spectrum'. Proceedings of the 21st International Conference on Engineering and Product Design Education: Towards a New Innovation Landscape, E and PDE 2019.