Silver, J., Marsh, PJ., Withnall, R. and Fern, GR. (2001) 'Efficient upconversion luminescence from YNbO4:Er3+'.1st International Conference on the Science and Technology of Emissive Displays and Lighting. San Diego, USA. [unpublished]

Ghobadian, A., O'Regan, N., Viney, H. and Gallear, D. (2001) 'Creating value in the new competitive landscape', in Ghobadian, A., O'Regan, N., Gallear, D. and Viney, H. (eds.) Strategy and Performance: Achieving Competitive Advantage in the Global Market Place. Palgrave macmillan. pp. 1 - 10. ISBN 10: 1-4039-1618-7. ISBN 13: 9781349512652.

Lim, J., Jackson, PR., Yang, Q. and Jones, BE. (2001) 'Optically Powered Hydraulic Pilot Valve using Piezoelectric Multilayer Actuator'. International Journal of Fluid Power, 2 (3). pp. 15 - 21. ISSN: 1439-9776

Djoudi, MS. and Bahai, H. (2001) 'Relocation of natural frequencies using physical parameter modifications', inComputational Fluid and Solid Mechanics. Elsevier. pp. 146 - 149. ISBN 13: 9780080439440.

Bourgeois, L., Mendis, CL., Muddle, BC. and Nie, HF. (2001) 'Characterisation of primary intermetallic phases in a Mg-Zn-Al casting alloy'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1203 - 1206.

Mendis, CL., Muddle, BC. and Nie, JF. (2001) 'Enhanced precipitation hardening in Mg-Zn-Al casting alloys'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1207 - 1210.

Fang, CM., Orhan, E., de Wijs, GA., Hintzen, HT., de Groot, RA., Marchand, R., Saillard, J-Y. and de With, G. et al. (2001) 'The electronic structure of tantalum (oxy)nitrides TaON and Ta3N5'. Journal of Materials Chemistry, 11 (4). pp. 1248 - 1252. ISSN: 0959-9428

Fang, CM., Metselaar, R., Hintzen, HT. and de With, G. (2001) 'Application of First-Principles Methods for the Calculation of the Crystal and Electronic Structure of Oxynitrides'. Key Engineering Materials, 206-213 (II). pp. 1149 - 1152. ISSN: 1013-9826

MOTTERSHEAD, JE., MARES, C. and FRISWELL, MI. (2001) 'AN INVERSE METHOD FOR THE ASSIGNMENT OF VIBRATION NODES'. Mechanical Systems and Signal Processing, 15 (1). pp. 87 - 100. ISSN: 0888-3270

Vignjevic, R. and Meo, M. (2001) 'Simulation of helicopter under-floor structure impact on water'. International Journal of Crashworthiness, 6 (3). pp. 425 - 443. ISSN: 1358-8265

Hunter, J. and Kalganova, T. (2001) 'Soft Computing in Investment Appraisal'. studies, 14. pp. 17 - 17.

Bennett, FH., Brameier, M., Cagnoni, S., Chen, S., Davila, J., Dittrich, P., Eiben, G., Ezawa, K., Fogel, D., Francone, F. and others. et al. (2001) 'The following reviewers have helped us to judge papers and reviews submitted for Volume 2 of Genetic Programming and Evolvable Machines'. Genetic Programming and Evolvable Machines, 2. pp. 315 - 315.

Ghobadian, A., Woo, HS., Gallear, D., Viney, H. and Liu, J. (2001) 'Benchmarking: Concept and Practice - With Particular Reference to the Finance Function'. CIMA Publishing. ISSN 10: 1-85971 488 9

Gan, TH., Hutchins, DA., Billson, DR. and Wong, FC. (2001) 'Ultrasonic tomographic imaging of an encased, highly attenuating solid medium'. Research in Nondestructive Evaluation, 13 (3). pp. 131 - 152. ISSN: 0934-9847

Eskin, DG. and Kharakterova, ML. (2001) 'The effect of silicon and copper on the precipitation hardening of sheets of a 6XXX-series alloy'. Materials Technology, 35. pp. 5 - 8.

Bonser, RHC. (2001) 'Mites on birds - Comment from Bonser'. Trends in Ecology and Evolution, 16 (1). pp. 18 - 19. ISSN: 0169-5347

BONSER, RHC. (2001) 'The elastic properties of wing and contour feather keratin from the Ostrich Struthio camelus'. Ibis, 143 (1). pp. 144 - 145. ISSN: 0019-1019

She, FH., Chow, S., Wang, B. and Kong, LX. (2001) 'Identification and Classification of Animal Fibres Using Artificial Neural Networks'. Journal of textile engineering, 47 (2). pp. 35 - 38. ISSN: 0040-5043

Abbey, AF., Ambrosi, RM., Smith, DR., Kendziorra, E., Hutchinson, I., Short, A., Bennie, P., Holland, A., Clauss, T., Kuster, M., Rochow, W., Brandt, M., Turner, MJL. and Wells, A. et al. (2001) 'The Effect of Low Energy Protons on the Operational Characteristics of EPIC-MOS CCDs'.Radiation Effects on Components & Systems. Proceedings of RADECS. pp. 201 - 208.

Kong, LX., Wang, B. and Hodgson, PD. (2001) 'Prediction of Stress-Strain Behaviors in Steels Using an Integrated Constitutive, FEM and ANN Model.'. ISIJ International, 41 (7). pp. 795 - 800. ISSN: 0915-1559

Martinez-Rubio, MI., Ireland, T., Fern, GR., silver, J. and Withnall, R. (2001) 'Rare-earth doped photonic crystals'.1st International Conference on the Science and Technology of Emissive Displays and Lighting. San Diego, USA. [unpublished]

Alfano, G. and Crisfield, MA. (2000) 'Numerical simulation of delamination in composites via interface elements'. European Congress on Computational Methods in Applied Sciences and Engineering Eccomas 2000.

Macredie,, RD. and Morar,, SS. (2000) 'Cognitive Issues in the Perception of Desktop Virtual Environments'. Journal of Intelligent Systems, 10 (5-6). pp. 421 - 450. ISSN: 0334-1860

Mares, C., Mottershead, JE. and Friswell, MI. (2000) 'Selection and updating of parameters for the GARTEUR SM-AG19 testbed'. Proceedings of the 25th International Conference on Noise and Vibration Engineering ISMA. pp. 657 - 662.

Natal Jorge, RM., Cardoso, RP. and Cesar de Sa, JMA. (2000) 'A quadrilateral mesh generator for adaptive procedures in bulk forming processes'. Engineering Computations, 17 (8). pp. 950 - 969. ISSN: 0264-4401

McKay, BJ., Cizek, P., Schumacher, P. and O'Reilly, KAQ. (2000) 'Heterogeneous nucleation of α-Al in Al-Ni-Si alloys'. Light Metals Proceedings of Sessions TMS Annual Meeting Warrendale Pennsylvania. pp. 833 - 839. ISSN: 1096-9586

Fern, GR., Silver, J., Withnall, R., Snowden, MJ. and Woodward, N. (2000) 'Oxygen activating biological sites modelled using novel colloidal co-polymer microgels'.SET for Britain.  [unpublished]

Katgerman, L. and Eskin, DG. (2000) 'Experimental study of linear shrinkage during solidification of binary and commercial aluminium alloys'.Continuous Casting. Frankfurt/Main. 13 - 15 November. Wiley-VCH. pp. 276 - 281.

Li, GQ., Ding, X. and Zhou, XM. (2000) 'Shaking Table Test Study on a Model of Steel-Concrete Hybrid Structure for Tall Buildings'.China-US Millennium Symposium on Earthquake Engineering. Beijing, China. 8 - 11 November. A A BALKEMA PUBLISHERS. pp. 377 - 381.

Gao, CH., Cheng, K. and Kirkwood, D. (2000) 'The investigation on the machining process of BTA deep hole drilling'. Journal of Materials Processing Technology, 107 (1-3). pp. 222 - 227. ISSN: 0924-0136

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube oriented aluminium single crystals'.Materials Congress 2000. CIRENCESTER, ENGLAND. SAGE Publications. pp. 1367 - 1371. ISSN: 0267-0836

Qiu, H., Cheng, K., Li, Y., Li, Y. and Wang, J. (2000) 'An approach to form deviation evaluation for CMM measurement of 2D curve contours'. Journal of Materials Processing Technology, 107 (1-3). pp. 119 - 126. ISSN: 0924-0136

Jiang, Z., Cheng, K. and Harrison, DK. (2000) 'A concurrent engineering approach to the development of a scroll compressor'. Journal of Materials Processing Technology, 107 (1-3). pp. 194 - 200. ISSN: 0924-0136

Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube-oriented aluminium single crystals'. Materials Science and Technology, 16 (11-12). pp. 1367 - 1371. ISSN: 1316-2012

MOTTERSHEAD, JE., MARES, C., FRISWELL, MI. and JAMES, S. (2000) 'SELECTION AND UPDATING OF PARAMETERS FOR AN ALUMINIUM SPACE-FRAME MODEL'. Mechanical Systems and Signal Processing, 14 (6). pp. 923 - 944. ISSN: 0888-3270

Li, G., Zhou, X. and Ding, X. (2000) 'Shaking Table Model Tests of a Steel-Concrete Hybrid High-rise Building'.16th National Symposium on High-rise Building Structures. Shanghai, China. 1 Proceedings of the 16th National Symposium on High-rise Building Structures. pp. 362 - 370.

Cardwell, DA., Babu, NH., Kambara, M., Smith, PJ. and Shi, Y. (2000) 'Fabrication of large grain NdBaCuO by seeded melt growth'. Physica C: Superconductivity, 341-348. pp. 2297 - 2300. ISSN: 0921-4534

Harrison, D., Chalkey, A. and Billet, E. (2000) 'The rebound effect', in Birkland, J. (ed.) Designing eco solutions. Earthscan.

Smith, PJ., Cardwell, DA., Babu, NH., Zhou, W. and Shi, Y-H. (2000) 'Properties of Y-Ba-Cu-O powder prepared by evaporative decomposition of solution for melt-processed bulk ceramics'. Superconductor Science and Technology, 13 (11). pp. 1526 - 1532. ISSN: 0953-2048

Fang, CM., de Wijs, GA., de Groot, RA., Hintzen, HT. and de With, G. (2000) 'ChemInform Abstract: Bulk and Surface Electronic Structure of the Layered Sub‐Nitrides Ca₂N and Sr₂N.'. ChemInform, 31 (44). ISSN: 0931-7597

Dawson, A., Hinsley, SA., Ferns, PN., Bonser, RHC. and Eccleston, L. (2000) 'Rate of moult affects feather quality: a mechanism linking current reproductive effort to future survival'. Proceedings of the Royal Society of London. Series B: Biological Sciences, 267 (1457). pp. 2093 - 2098. ISSN: 0962-8452

Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Effect of cooling rate on the microstructure of hypereutectic Al-Mg2Si alloys'. Journal of Materials Science Letters, 19 (20). pp. 1825 - 1828. ISSN: 0261-8028

Babu, NH., Lo, W. and Cardwell, DA. (2000) 'Influence of Undercooling and Nd₄Ba₂Cu₂O₁₀Content on the Growth Rate of Large‐Grain Bulk Nd‐Ba‐Cu‐O Superconductor'. Journal of the American Ceramic Society, 83 (10). pp. 2622 - 2624. ISSN: 0002-7820

Atherton, M., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents – I. Fundamentals of design procedures (abstract)'. Biomedicine & Pharmacotherapy, 54 (8-9). pp. 437 - 470. ISSN: 0753-3322

Atherton, M., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents – II. Planning of experiment (abstract)'. Biomedicine & Pharmacotherapy, 54 (8-9). pp. 437 - 470. ISSN: 0753-3322 Open Access Link

Niu, HJ. and Chang, ITH. (2000) 'Microstructural evolution during laser cladding of M2 high-speed steel'. Metallurgical and Materials Transactions A, 31 (10). pp. 2615 - 2625. ISSN: 1073-5623

Ji, S. and Fan, Z. (2000) 'Microstructural evolution of semisolid Sn-15wt%Pb alloy under high shear rate and high intensity of turbulence'.the 6th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Turin, Italy. 20 - 29 September. Edimet. pp. 723 - 729.

Frey, SD., Harrison, DJ. and Billett, EH. (2000) 'Environmental assessment of electronic products using LCA and ecological footprint'.International Congress and Exhibition on Electronics Goes Green 2000+: A Challenge for the Millenium. Berlin, GERMANY. 11 - 13 September. V D E - VERLAG GMBH. pp. 253 - 258.

Cheng, K., Jiang, Z. and Harrison, DK. (2000) 'A Generic Integration Approach to the Design and Manufacture of Scroll Compressors'.ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers. pp. 913 - 919.

Toussaint, J. and Cheng, K. (2000) 'Development of an Interactive Web-Based Design Support System for the Lubrication of Rolling Bearings'.ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers. pp. 807 - 814.