Ariyatum, B., Unnanon, K., Nakngoenthong, J., Phuchamnong, A. and Soparat, J. (2006) 'I-6 RAPID MOLDING USING AN EPOXY RESIN COMPOSITE(Session: Molding/Roughness/Mechanical)'. The Proceedings of the Asian Symposium on Materials and Processing, 2006 (0). pp. 152 - 152.

Maciel, TM., Chang, ITH., Strangwood, M. and Castro, WBD. (2006) 'Brazing of Al₂O₃ with Rapidly Solidified Melt Spun Ni-Cr-P Alloy Ribbons'. Trans Tech Publications Ltd.. pp. 473 - 477. ISSN: 0255-5476

Kim, J-S., Jiang, K. and Chang, I. (2006) 'A net shape process for metallic microcomponent fabrication using Al and Cu micro/nano powders'. Journal of Micromechanics and Microengineering, 16 (1). pp. 48 - 52. ISSN: 0960-1317

Geier, GF., Bauer, W., Schumacher, P. and McKay, BJ. (2005) 'Microstructure transition from lamellar to compacted graphite using different modification agents'. Materials Science and Engineering A, 413-414. pp. 339 - 345. ISSN: 0921-5093

Cardoso, RP. and Yoon, JW. (2005) 'One Point Quadrature Shell Elements for Sheet Metal Forming Analysis'. Archives of Computational Methods in Engineering, 12. pp. 3 - 66. ISSN: 1886-1784

Reveles, JR., Lukyanov, AA. and Vignjevic, R. (2005) 'Numerical simulation of debris impact on thin walled metal shields'. European Space Agency Special Publication ESA SP. pp. 823 - 829. ISSN: 0379-6566

Lukyanov, AA., Vignjevic, R. and Reveles, JR. (2005) 'Simulation of high-velocity impact of graphite/epoxy composite laminates'. European Space Agency Special Publication ESA SP. pp. 693 - 701. ISSN: 0379-6566

Fan, Z., Fang, X. and Ji, S. (2005) 'Microstructure and mechanical properties of rheo-diecast (RDC) aluminium alloys'. Materials Science and Engineering: A, 412 (1-2). pp. 298 - 306. ISSN: 0921-5093

Komashie, A. and Mousavi, A. (2005) 'Modeling emergency departments using discrete event simulation techniques'.2005 Winter Simulation Conference (WSC 05). Orlando, FL. 4 - 7 December. Association for Computing Machinery. pp. 2681 - 2685. ISSN: 0891-7736 Open Access Link

Mottershead, JE., Mares, C., James, S. and Friswell, MI. (2005) 'Application of stochastic model updating to a collection of structures with spot-welded joints'. Conference Proceedings of the Society for Experimental Mechanics Series. ISSN: 2191-5644

Alfano, G. and Sacco, E. (2005) 'A cohesive interface model based on damage and friction'. 11th International Conference on Fracture 2005 Icf11. pp. 645 - 650.

Alfano, G., Rosati, L. and Simonelli, G. (2005) 'Modelling of failure mechanisms in RC beams retrofitted with FRP in flexure'. Computational Plasticity Fundamentals and Applications Proceedings of the 8th International Conference on Computational Plasticity Complas Viii. pp. 205 - 208.

Eskin, D., Suyitno. and Katgerman, L. (2005) 'Structure features related to hot tearing during direct chill casting'. Proceedings of the Australasian Conference and Exhibition Aluminium Cast House Technology. pp. 85 - 92.

(2005) 'Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys'. ISSN 13: 9780080445373

Mares, C., Mottershead, JE. and Friswell, MI. (2005) 'Updating a spot-welded joint using randomized parameters and a collection of measurements'. 12th International Congress on Sound and Vibration 2005 Icsv 2005, 3. pp. 1937 - 1944.

Lane, R., Stanton, NA. and Harrison, D. (2005) 'Applying hierarchical task analysis and SHERPA to UK hospital drug administration'. Healthcare Systems Ergonomics and Patient Safety Human Factor A Bridge Between Care and Cure Proceedings of the International Conference Heps 2005. pp. 106 - 111.

Mottershead, JE., James, S., Mares, C., Friswell, MI., Ahmadian, H. and Reece, CA. (2005) 'Modelling and updating of joints and connections'. Conference Proceedings of the Society for Experimental Mechanics Series. ISSN: 2191-5644

Mares, C., Mottershead, JE. and Friswell, MI. (2005) 'Inverse propagation and identification of random parameters in model updating'. Conference Proceedings of the Society for Experimental Mechanics Series. ISSN: 2191-5644

Li, Z., Zhang, Y. and Zhou, X. (2005) 'Short fiber reinforced geopolymer composites manufactured by extrusion'. Journal of Materials in Civil Engineering, 17 (6). pp. 624 - 631. ISSN: 0899-1561

Aziz, M. and Macredie, RD. (2005) 'Exploring the role of perceived ease of use in Web-based information system usage'.2005 IEEE International Conference on Virtual Environments, Human-Computer Interfaces and Measurement Systems. Giardini Naxos, ITALY. 1 - 20 July. IEEE. pp. 6 - 6.

Silver, J., Withnall, R., Marsh, PJ., Lipman, A., Vimalaranjithan, S. and Fern, GR. (2005) 'P-3: Cathodoluminescence studies on Y2SiO5:Tb and Y2SiO5:Ce phosphors prepared by sol gel synthesis and a high-efficiency green-emitting (Y,Gd)2O2S:Tb phosphor for FED applications'. SID Conference Record of the International Display Research Conference. pp. 222 - 225. ISSN: 1083-1312

Eskin, DG. and Katgerman, L. (2005) 'Effect of process parameters on the characteristics of the billet sump and related defect formation during DC casting of aluminium alloys'.Continuous Casting of Nonferrous Alloys. Neu-Ulm. 14 - 16 November. Wiley-VCH. pp. 271 - 276.

Ruvalcaba, JDG., Eskin, DG. and Katgerman, L. (2005) 'Quenching study on the solidification of aluminium alloys'.Continuous Casting of Nonferrous Alloys. Neu-Ulm. 14 - 16 November. Wiley-VCH. pp. 290 - 295.

Turchin, AN., Eskin, DG. and Katgerman, L. (2005) 'Effect of melt flow on macrostructure and macrosegregation in an Al-4.5% Cu alloy'.Continuous Casting of Nonferrous Alloys. Neu-Ulm. 14 - 16 November. Wiley-VCH. pp. 283 - 289.

Nadella, RK., Eskin, DG. and Katgerman, L. (2005) 'Effect of casting speed and grain refining on macrosegregation of DC cast AA6061'.Continuous Casting of Nonferrous Alloys. Neu-Ulm. 14 - 16 November. Wiley-VCH. pp. 277 - 282.

Fern, GR., Mather, TA. and Pyle, DM. (2005) 'Investigation of near-source basaltic glasses using Fe-57 Mossbauer spectroscopy'. Hyperfine Interactions, 166 (1-4). pp. 705 - 708. ISSN: 0304-3843

Iida, K., Babu, NH., Shi, Y. and Cardwell, DA. (2005) 'Seeded infiltration and growth of large, single domain Y–Ba–Cu–O bulk superconductors with very high critical current densities'. Superconductor Science and Technology, 18 (11). pp. 1421 - 1427. ISSN: 0953-2048

Scamans, G. and Fan, Z. (2005) 'Twin roll rheocasting of aluminum alloys'. Light Metal Age, 63 (6). pp. 6 - 9. ISSN: 0024-3345

Rombach, G., Specker, A., Zhou, X., Mickleborough, N., Li, Z., Turmo, J., Ramos, G. and Aparicio, AC. et al. (2005) 'Shear strength of joints in precast concrete segmental bridges'. ACI Structural Journal, 102 (6). pp. 901 - 904. ISSN: 0889-3241

Rombach, G. and Specker, A. (2005) 'Shear strength of joints in precast concrete segmental bridges. Paper by Xiangming Zhou , Neil Mickleborough, and Zongjin Li - Discussion'. ACI STRUCTURAL JOURNAL, 102 (6). pp. 901 - 901. ISSN: 0889-3241

Scamans, G. and Fan, Z. (2005) 'Rheoforming of novel aluminium and magnesium alloys'. Aluminium International Today, 17 (6). pp. 22 - 26. ISSN: 1475-455X

Giacomin, J. and Woo, YJ. (2005) 'A study of human ability to detect road surface type based on steering wheel vibration feedback'. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219 (11). pp. 1259 - 1270. ISSN: 0954-4070 Open Access Link

Kazi, TA., Stanton, NA., Young, MS. and Harrison, DA. (2005) 'Assessing drivers' level of trust in adaptive cruise control systems design', in Dorn, L. (ed.) Driver behaviour and training. Ashgate Publishing. , 2. ISBN 10: 0754644308. ISBN 13: 9780754644309.

Cardoso, RP. and Yoon, JW. (2005) 'One point quadrature shell element with through-thickness stretch'. Computer Methods in Applied Mechanics and Engineering, 194 (9-11). pp. 1161 - 1199. ISSN: 0045-7825

Belov, NA., Eskin, DG. and Avxentieva, NN. (2005) 'Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys'. Acta Materialia, 53 (17). pp. 4709 - 4722. ISSN: 1359-6454

Haindl, S., Eisterer, M., Hörhager, N., Weber, HW., Walter, H., Shlyk, L., Krabbes, G., Hari Babu, N. and Cardwell, DA. et al. (2005) 'Novel methods to characterize bulk RE-BCO superconductors'. Physica C: Superconductivity, 426-431 (I). pp. 625 - 631. ISSN: 0921-4534

Koblischka-Veneva, A., Koblischka, MR., Mücklich, F., Hari Babu, N., Cardwell, DA. and Murakami, M. (2005) 'Comparative study of grain orientation in melt-textured HTSC with different additions'. Physica C: Superconductivity, 426-431 (I). pp. 618 - 624. ISSN: 0921-4534

Hari Babu, N., Shi, Y-H., Iida, K., Cardwell, DA., Haindl, S., Eisterer, M. and Weber, HW. et al. (2005) 'Processing of large, single grain YBa2Cu3O7−δ/Y2BaCuO5/Y2Ba4CuNbOy bulk composites'. Physica C: Superconductivity, 426-431 (I). pp. 520 - 526. ISSN: 0921-4534

Berber-Solano, TP. and Giacomin, JA. (2005) 'Perception enhancement system for automotive steering'.2005 Annual Conference of the European Association of Cognitive Ergonomics (EACE 2005). Chania, Crete, Greece. 29 - 1 October. University of Athens. pp. 147 - 153.Open Access Link

Dimov, SS., Pham, DT., Dotchev, KD. and Ivanov, AI. (2005) 'Dimensional accuracy of castform polystyrene patterns produced by selective laser sintering'.2nd International Conference on Advanced Research in Virtual and Rapid Prototyping. Leiria, Portugal. 28 - 1 October. Taylor & Francis Group. pp. 299 - 304.

Herrero, A., Goenaga, I., Azcarate, S., Uriarte, L., Ivanov, A. and Rees, A. (2005) 'Mechanical micromachining by milling, wire EDM, die-sinking EDM and diamond turning', in Junkar, M. and Levy, PR. (eds.) Proceedings of the 8th International Conference on Management of Innovative Technologies - MIT'2005, Fiesa, Slovenia, 22-24 September 2005. Slovenia : Laboratory for Alternative Technologies – University of Ljubljana. ISBN 10: 9616238965. ISBN 13: 9789616238960.

Silver, J., Withnall, R., Marsh, PJ., Lipman, A., Vimalaranjithan, S. and Fern, GR. (2005) 'Cathodoluminescence studies on Y2SiO5 : Tb and Y2SiO5 : Ce phosphors prepared by sol gel synthesis and a high-efficiency green-emitting (Y,Gd)(2)O2S : Tb phosphor for FED applications'.25th International Display Research Conference (Eurodisplay 2005). Edinburgh, Scotland. 19 - 22 September. SOC INFORMATION DISPLAY. pp. 222 - 225.

Gallear, D. and Ghobadian, A. (2005) 'An investigation of the effect of organisational characteristics on supplier relationship attributes in UK organisations'. Oxford, UK. 13 - 15 September. Proceedings of British Academy of Management Annual Conference.

Watson, S., MacPherson, WN., Barton, JS., Jones, JDC., Tyas, A., Pichugin, AV., Hindle, A., Parkes, W., Dunare, C. and Stevenson, T. et al. (2005) 'Investigation of shock waves in explosive blasts using fibre optic pressure sensors'.Sensors and Their Applications XIII. University of Greenwich at Medway, Kent. 6 - 8 September. IOP Publishing. pp. 226 - 231. ISSN: 1742-6588

Collins, MW., Zhao, X., Atherton, MA. and Karayiannis, TG. (2005) 'The modeling of haemodynamic systems'.19th National Congress of Thermodynamicists. Sopot, Poland. 5 - 8 September. [unpublished]

Bonser, R. (2005) 'SCIENCE TO GET ONE'S TEETH INTO'. Journal of Experimental Biology, 208 (17). pp. iv - iv. ISSN: 0022-0949

De Vuyst, T., Vignjevic, R. and Campbell, JC. (2005) 'Coupling between meshless and finite element methods'. International Journal of Impact Engineering, 31 (8). pp. 1054 - 1064. ISSN: 0734-743X

Meo, M., Vignjevic, R. and Marengo, G. (2005) 'The response of honeycomb sandwich panels under low-velocity impact loading'. International Journal of Mechanical Sciences, 47 (9). pp. 1301 - 1325. ISSN: 0020-7403

Pham, DT., Dimov, SS., Bigot, S., Ivanov, A. and Popov, K. (2005) 'Micro EDM drilling: Accuracy study', in Bramley, AN. (ed.) Advances in integrated design and manufacturing in mechanical engineering. Kluwer Academic Publishers. pp. 281 - 294. ISBN 10: 1402034814. ISBN 13: 9781402034817.

Pandit, H., Shi, D., Hari Babu, N., Chaud, X., Cardwell, DA., He, P., Isfort, D., Tournier, R., Mast, D. and Ferendeci, AM. et al. (2005) 'High Tc superconductor re-entrant cavity filter structures'. Physica C: Superconductivity, 425 (1-2). pp. 44 - 51. ISSN: 0921-4534

Eskin, DG., Savran, VI. and Katgerman, L. (2005) 'Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu Alloy'. Metallurgical and Materials Transactions A, 36 (9). pp. 2561 - 2561. ISSN: 1073-5623