Han, SZ., Gu, JH., Lee, JH., Que, ZP., Shin, JH., Lim, SH. and Kim, SS. et al. (2013) 'Effect of v addition on hardness and electrical conductivity in Cu-Ni-Si alloys'. Metals and Materials International, 19 (4). pp. 637 - 641. ISSN: 1598-9623

Cheng, WL., Que, ZP., Zhang, JS., Xu, CX., Liang, W., You, BS. and Park, SS. et al. (2013) 'Compressive deformation behavior of an indirect-extruded Mg-8Sn-1Al-1Zn alloy'. International Journal of Minerals Metallurgy and Materials, 20 (1). pp. 49 - 56. ISSN: 1674-4799

Stone, IC., McKay, BJ. and Fan, Z. (2013) 'Preface'.

Al-Helal, K. (2013) 'New Approaches to Casting Hypereutectic Al-Si Alloys to Achieve Simultaneous Refinement of Primary Silicon and Modification of Eutectic Silicon'. PhD Thesis.Open Access Link

Denkena, B., Stephan, EP., Maischak, M., Heinisch, D. and Andres, M. (2013) 'Numerical Computation Methods for Modeling the Phenomenon of Tool Extraction', inLecture Notes in Production Engineering. Springer Berlin Heidelberg. , Part F1131. pp. 285 - 308. ISBN 13: 9783642324475.

Chang Dr, I. and Zhao, Y. (2013) 'Advances in powder metallurgy: Properties, processing and applications'. Woodhead Publishing Limited. ISSN 13: 9780857094209

Chang Dr, I. (2013) 'Plasma synthesis of metal nanopowders', inAdvances in Powder Metallurgy Properties Processing and Applications. Elsevier. pp. 69 - 85. ISBN 13: 9780857094209.

Pavey, J., Penchev, P., Dimov, S., Chang, I., Petkov, P. and Kolew, A. (2013) 'Laser Machining of a Zr-Based Bulk Metallic Glass with Nano-Second Laser'.10th International Conference on Multi-Material Micro Manufacture. Research Publishing Services. pp. 147 - 151.

Hintzsche, LE., Fang, CM., Watts, T., Marsman, M., Jordan, G., Lamers, MWPE., Weeber, AW. and Kresse, G. et al. (2012) 'Density functional theory study of the structural and electronic properties of amorphous silicon nitrides: Si3N4-x:H'. Physical Review B Condensed Matter and Materials Physics, 86 (23). ISSN: 1098-0121

Moustakidis, S., Kappatos, V., Karlsson, P., Selcuk, C., Hrissagis, K. and Gan, TH. (2012) 'An automated long range ultrasonic rail flaw detection system based on the support vector machine algorithm'. Wit Transactions on the Built Environment, 127. pp. 199 - 210. ISSN: 1743-3509

Shu, S., Ding, H., Chen, S. and Cheng, K. (2012) 'Fem-based design and analysis of a smart cutting tool with internal cooling for cutting temperature measurement and control'. Applied Mechanics and Materials, 217-219. pp. 1874 - 1879. ISSN: 1660-9336

Huo, D., Cheng, K. and Ding, H. (2012) 'Design and performance assessment of a 5-axis ultra-precision micro-milling machine'. Applied Mechanics and Materials, 217-219. pp. 1699 - 1704. ISSN: 1660-9336

Shah, SGS., Barnett, J., Kuljis, J., Hone, K. and Kaczmarski, R. (2012) 'Patients’ experiences with hospital outpatient anticoagulation services: dimensions and determinants'. International Journal of Person Centered Medicine, 2 (4). pp. 669 - 679. ISSN: 2043-7730

Zhou, X. (2012) 'Geopolymer-based Building Products Made by Extrusion'.UK Materials Knowledge Transfer Network Conference on Applications of Geopolymers. Stoke-on-Trent, Staffordshire, UK. 4 - 4 December.

Maidin, SB., Campbell, I. and Pei, E. (2012) 'Development of a design feature database to support design for additive manufacturing'. Assembly Automation, 32 (3). pp. 235 - 244. ISSN: 0144-5154

Withnall, R., Fern, G., Yan, X. and Silver, J. (2012) 'Contrasting behaviour of the co-activators in the luminescence spectra of Y2O2S:Tb3+,Er3+ nanometre sized particles under UV and red light excitation'. Nanoscale, 5 (3). pp. 1091 - 1096. ISSN: 2040-3364

Ursache, N. and Mares, C. (2012) 'Optimisation of a corrugated skin for a morphable winglet'. 53rd AIAA ASME ASCE AHS ASC Structures Structural Dynamics and Materials Conference 2012. ISSN: 0273-4508

Shah, SGS., Barnett, J., Kuljis, J., Hone, K. and Kaczmarski, R. (2012) 'Factors determining patients’ intentions to use point-of-care testing medical devices for self-monitoring: The case of international normalised ratio self-testing'. Patient Preference and Adherence, 7 (7). pp. 1 - 14. ISSN: 1177-889X Open Access Link

Lawrie, JB. (2012) 'Analytic mode-matching for acoustic scattering in three dimensional waveguides with flexible walls: Application to a triangular duct'. Wave Motion, Online Paper (3). pp. 542 - 557. ISSN: 0165-2125 Open Access Link

Hou, J., Wright, E., Bonser, RHC. and Jeronimidis, G. (2012) 'Development of biomimetic squid-inspired suckers'. Journal of Bionic Engineering, 9 (4). pp. 484 - 493. ISSN: 1672-6529

Hou, J., Bonser, RHC. and Jeronimidis, G. (2012) 'Developing tactile sensors for a soft-bodied robot'.2012 IEEE International Conference on Robotics and Biomimetics (ROBIO). Guangzhou, PEOPLES R CHINA. 1 - 14 December. IEEE. pp. 1979 - 1984.

Silsilah, HA., Lam, B. and Silve, S. (2012) 'Challenges of integrating Islamic art and culture in commercial brands'. Icdc 2012 2nd International Conference on Design Creativity Proceedings. pp. 375 - 383.

Böttger, B., Apel, M., Santillana, B. and Eskin, DG. (2012) 'Phase-field modelling of microstructure formation during the solidification of continuously cast low carbon and HSLA steels'.13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP). Schladming, AUSTRIA. 1 - 22 June. IOP Publishing. pp. 012107 - 012107. ISSN: 1757-8981

Zhang, L., Eskin, DG., Miroux, A., Subroto, T. and Katgerman, L. (2012) 'Effect of inlet geometry on macrosegregation during the direct chill casting of 7050 alloy billets: Experiments and computer modelling'.13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP). Schladming, AUSTRIA. 1 - 22 June. IOP Publishing. pp. 012019 - 012019. ISSN: 1757-8981

Subroto, T., Miroux, A., Mortensen, D., M'Hamdi, M., Eskin, DG. and Katgerman, L. (2012) 'Semi-quantitative predictions of hot tearing and cold cracking in aluminum DC casting using numerical process simulator'.13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP). Schladming, AUSTRIA. 1 - 22 June. IOP Publishing. pp. 012068 - 012068. ISSN: 1757-8981

Gegov, E., Gegov, A., Gobet, F., Atherton, M., Freudenthal, D. and Pine, J. (2012) 'Cognitive modelling of language acquisition with complex networks', inComputational Intelligence. pp. 95 - 105.

Bhattacharjee, T., Mendis, CL., Sasaki, TT., Ohkubo, T. and Hono, K. (2012) 'Effect of Zr addition on the precipitation in Mg-Zn-based alloy'. Scripta Materialia, 67 (12). pp. 967 - 970. ISSN: 1359-6462

Tirumalasetty, GK., Fang, CM., Xu, Q., Jansen, J., Sietsma, J., Van Huis, MA. and Zandbergen, HW. et al. (2012) 'Novel ultrafine Fe(C) precipitates strengthen transformation-induced- plasticity steel'. Acta Materialia, 60 (20). pp. 7160 - 7168. ISSN: 1359-6454

Wang, C., Noh, Y., Terunaga, C., Tokumoto, M., Okuyama, I., Yusuke, M., Ishii, H., Takanishi, A., Hatake, K. and Shoji, S. et al. (2012) 'Development of a face robot for cranial nerves examination training'.2012 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 14 - 19.

Noh, Y., Wang, C., Tokumoto, M., Matsuoka, Y., Chihara, T., Ishii, H., Takanishi, A., Takayama, T. and Shoji, S. et al. (2012) 'Development of the airway Management Training System WKA-5: Improvement of mechanical designs for high-fidelity patient simulation'.2012 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 1224 - 1229.

Wang, C., Noh, Y., Terunaga, C., Tokumoto, M., Yusuke, M., Sher, C., Niibori, A., Ishii, H., Takanishi, A., Hatake, K. and Shoji, S. et al. (2012) 'Development of optic nerve and facial nerve models for cranial nerve examination training'.2012 IEEE/SICE International Symposium on System Integration (SII 2012). Kyushu Univ, Fukuoka, JAPAN. 1 - 18 December. IEEE. pp. 492 - 497.

Wang, C., Noh, Y., Ebihara, K., Terunaga, C., Tokumoto, M., Okuyama, I., Yusuke, M., Ishii, H., Takanishi, A., Hatake, K. and Shoji, S. et al. (2012) 'Development of an arm robot for neurologic examination training'.2012 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2012). Algarve, PORTUGAL. 1 - 12 October. IEEE. pp. 1090 - 1095. ISSN: 2153-0858

Santillana, B., Boom, R., Eskin, D., Mizukami, H., Hanao, M. and Kawamoto, M. (2012) 'High-temperature mechanical behavior and fracture analysis of a low-carbon steel related to cracking'. Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 43 (13). pp. 5048 - 5057. ISSN: 1073-5623

Li, W., Ding, H. and Cheng, K. (2012) 'An investigation on the design and performance assessment of double-PID and LQR controllers for the inverted pendulum'.2012 UKACC International Conference on Control (CONTROL). IEEE. pp. 190 - 196.

Bai, Q., He, B., Liang, Y. and Cheng, K. (2012) 'Micro-tensile device and test for micro-wire in MEMS'.18th International Conference on Automation and Computing (ICAC) - Integration of Design and Engineering. Loughborough Univ, Leicestershire, ENGLAND. 26 - 8 September. IEEE. pp. 234 - 237.

Hu, ZQ., Cheng, K. and Feng, ZM. (2012) 'Numerical simulation of the component microstructure change through roll forming'.18th International Conference on Automation and Computing (ICAC) - Integration of Design and Engineering. Loughborough Univ, Leicestershire, ENGLAND. 26 - 8 September. IEEE. pp. 254 - 258.

Rotter, KRG., Jensen, F. and Atherton, MA. (2012) 'Noise suffered by the Autistic: Can Mechatronics Help?'.9th France-Japan and 7th Europe-Asia Congress on Mechatronics (MECATRONICS) / 13th International Workshop on Research and Education in Mechatronics (REM). Supmeca, Paris, FRANCE. 21 - 23 November. IEEE. pp. 219 - 224.

Tahhan, A., Dehouche, Z. and Fern, G. (2012) 'Nanostructured Materials for Silicon Solar Cells Grown by PECVD'.World Congress on Sustainable Technologies (WCST). London, ENGLAND. 19 - 20 November. IEEE. pp. 116 - 116.

Zhang, Y., Ma, N., Brian, M., Li, X. and Wang, H. (2012) 'The role of Fe on the grain refinement of high purity aluminium'. Trans Tech Publications, Ltd.. pp. 2264 - 2268. ISSN: 1022-6680

Gulavani, O., Hughes, K. and Vignjevic. (2012) 'COMPUTATIONAL MODELLING TECHNIQUES FOR THE CERTIFICATION OF AN INNOVATIVE AIRCRAFT SEAT AGAINST STATIC COMPLIANCE (CS 25.561)'.Aerospace Structural Impact Dynamics International Conference. Wichita, Kansas. [unpublished]

Durrell, JH., Dancer, CEJ., Dennis, A., Shi, Y., Xu, Z., Campbell, AM., Babu, NH., Todd, RI., Grovenor, CRM. and Cardwell, DA. et al. (2012) 'A trapped field of >3 T in bulk MgB 2 fabricated by uniaxial hot pressing'. Superconductor Science and Technology, 25 (11). pp. 112002 - 112002. ISSN: 0953-2048

Vignjevic, R., Djordjevic, N. and Panov, V. (2012) 'Modelling of dynamic behaviour of orthotropic metals including damage and failure'. International Journal of Plasticity, 38. pp. 47 - 85. ISSN: 0749-6419

Li, Z., Li, L., Duan, L., Lu, KJ. and Shi, Z. (2012) 'Distributed data mining: a survey'. Information Technology and Management, 4 (4). pp. 403 - 409. ISSN: 1936-6442

Ji, S. and Fan, Z. (2012) 'Extruded microstructure of Zn-5 wt-%Al eutectic alloy processed by twin screw extrusion'. Materials Science and Technology United Kingdom, 28 (11). pp. 1287 - 1294. ISSN: 0267-0836

Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (11). pp. 4331 - 4344. ISSN: 1073-5623 Open Access Link

Vignjevic, R., Djordjevic, N., Campbell, J. and Panov, V. (2012) 'Modelling of dynamic damage and failure in aluminium alloys'. International Journal of Impact Engineering, 49. pp. 61 - 76. ISSN: 0734-743X

Giacomin, J. and Bertola, D. (2012) 'Human emotional response to energy visualisations'. International Journal of Industrial Ergonomics, 42 (6). pp. 542 - 552. ISSN: 0169-8141 Open Access Link

Dowson, M., Poole, A., Harrison, D. and Gideon, S. (2012) 'Domestic UK retrofit challenge: Barriers, incentives and current performance leading into the green deal'. Energy Policy, 50. pp. 294 - 305. ISSN: 0301-4215 Open Access Link

Gunasekaran, A. and Gallear, D. (2012) 'Special Issue on Sustainable development of manufacturing and services'. International Journal of Production Economics, 140 (1). pp. 1 - 6. ISSN: 0925-5273

Mousavi, A., Jan, S., Li, M., Al-Raweshidy, H. and Qi, M. (2012) 'Dealing with Uncertain Entities in Ontology Alignment using Rough Sets'. IEEE Transactions on Systems, Man, and Cybernetics - Part C, 42 (6). pp. 1600 - 1612. ISSN: 1094-6977 Open Access Link

Mendis, CL., Oh-Ishi, K. and Hono, K. (2012) 'Microalloying effect on the precipitation processes of Mg-Ca alloys'.Symposium on Approaches for Investigating Phase Transformations at the Atomic Scale. San Diego, CA. 1 - 3 March. Springer Science and Business Media LLC. pp. 3978 - 3987. ISSN: 1073-5623