IMM
Giannakeas, IN., Papathanasiou, TK. and Bahai, H. (2019) 'Wave reflection and cut-off frequencies in coupled FE-peridynamic grids'. International Journal for Numerical Methods in Engineering, 120 (1). pp. 1 - 27. ISSN: 0029-5981 Open Access Link
Shaw, S. (Accepted) 'anaconda.tgz file for: An a priori error estimate for a temporally discontinuous Galerkin space-time finite element method for linear elasto- and visco-dynamics'. [Computer program].
Shaw, S. (Accepted) 'anaconda.zip file for: An a priori error estimate for a temporally discontinuous Galerkin space-time finite element method for linear elasto- and visco-dynamics'. [Computer program].
Gallear, D., He, Q., Ghobadian, A. and Ramanathan, R. (2019) 'Managing Knowledge in Supply Chains: A Catalyst to Triple Bottom Line Sustainability'. Production Planning and Control, 30 (5-6). pp. 448 - 463. ISSN: 0953-7287 Open Access Link
Zhou, M., Cardoso, RP. and Bahai, H. (2019) 'A New Material Model for Thermo-mechanical Analysis of Steels in Fire'. International Journal of Mechanical Sciences, 159. pp. 467 - 486. ISSN: 0020-7403 Open Access Link
Wang, S., Housden, RJ., Noh, Y., Singh, A., Lindenroth, L., Liu, H., et al. (2019) 'Analysis of a customized clutch joint designed for the safety management of an ultrasound robot'. Applied Sciences (Switzerland), 9 (9). pp. 1900 - 1900. ISSN: 2076-3417 Open Access Link
Huang, Z., Li, M., Mousavi, A., Danishvar, M. and Wang, Z. (2019) 'EGEP: An Event Tracker Enhanced Gene Expression Programming for Data Driven System Engineering Problems'. IEEE Transactions on Emerging Topics in Computational Intelligence, 3 (2). pp. 117 - 117. ISSN: 2168-6750 Open Access Link
Razavi, M. and Huang, Y. (2019) 'Assessment of magnesium-based biomaterials: From bench to clinic'. Biomaterials Science, 7 (6). pp. 2241 - 2263. ISSN: 2047-4830 Open Access Link
Bollada, PC., Men, H., Fang, C., Jimack, PK., Fan, Z. and Mullis, AM. (2019) 'A novel route to the coupling of molecular dynamics and phase-field simulations of crystal growth'.Joint 5th International Conference on Advances in Solidification Processes (ICASP-5) & 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5). Salzburg, Austria. 1 - 21 June. IOP Publishing. pp. 1 - 7. ISSN: 1757-8981 Open Access Link
Yuan, Z., Cheng, K., Zhang, Y., Hu, J. and Zheng, P. (2019) 'Investigation on the fabrication of dicing blades with different sintering methods for machining hard-brittle material wafers'. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 233 (7). pp. 1781 - 1793. ISSN: 0954-4054
Li, Y., Cheng, W., Wang, B. and Ren, Y. (2019) 'Investigation on elastic compound buckling of latticed columns considering eccentricity and geometric imperfections'. Advances in Mechanical Engineering, 11 (5). ISSN: 1687-8132
Zheng, H., Ertel, JP., Kourmpetis, M., Kanfoud, J., Niederleithinger, E. and Gan, TH. (2019) 'Integrity Testing of Cast In Situ Concrete Piles Based on an Impulse Response Function Method Using Sine-Sweep Excitation by a Shaker'. Journal of Nondestructive Evaluation, 38 (55). pp. 1 - 18. ISSN: 0195-9298 Open Access Link
Aroganam, G., Manivannan, N. and Harrison, D. (2019) 'Review on Wearable Technology Sensors Used in Consumer Sport Applications'. MDPI Sensors, 19 (9). pp. 1 - 26. ISSN: 1424-8220 Open Access Link
Kastiukas, G., Zhou, X., Neyazi, B. and Wan, KT. (2019) 'Sustainable Calcination of Magnesium Hydroxide for Magnesium Oxychloride Cement Production'. Journal of Materials in Civil Engineering, 31 (7). pp. 1 - 9. ISSN: 0899-1561 Open Access Link
Razavi, M. and Huang, Y. (2019) 'A Magnesium-based Nanobiocomposite Processed by a Novel Technique Combining High Shear Solidification and Hot Extrusion'. Recent patents on nanotechnology, 13 (1). pp. 38 - 48. ISSN: 1872-2105
Fadzil, FZM., Mousavi, A. and Danishvar, M. (2019) 'Simulation of Event-Based Technique for Harmonic Failures'.2019 IEEE/SICE International Symposium on System Integration (SII). Paris, France. 25 - 16 January. IEEE. pp. 66 - 72. ISSN: 2474-2317 Open Access Link
van Gog, H., Li, W-F., Fang, C., Koster, RS., Dijkstra, M. and van Huis, M. (2019) 'Thermal stability and electronic and magnetic properties of atomically thin 2D transition metal oxides'. npj 2D Materials and Applications, 3 (18).Open Access Link
Fang, CM., Ahuja, R., Eriksson, O., Li, S., Jansson, U., Wilhelmsson, O. and et al. (Accepted)
'General trend of the mechanical properties of the ternary carbides
Liu, G. and Ji, S. (2019) 'Microstructure, dynamic restoration and recrystallization texture of Sn-Cu after rolling at room temperature'. Materials Characterization, 150. pp. 174 - 183. ISSN: 1044-5803 Open Access Link
Zennaro, M., O'Boy, DJ., Lowe, PS. and Gan, T-H. (2019) 'Characterization and Design Improvement of a Thickness-Shear Lead Zirconate Titanate Transducer for Low Frequency Ultrasonic Guided Wave Applications.'. Sensors (Basel, Switzerland), 19 (8). pp. 1848 - 1848. ISSN: 1424-8220 Open Access Link
Moradi, MM., Jamshidi Aval, H., Jamaati, R., Amirkhanlou, S. and Ji, S. (2019) 'Effect of SiC nanoparticles on the microstructure and texture of friction stir welded AA2024/AA6061'. Materials Characterization, 152. pp. 169 - 179. ISSN: 1044-5803 Open Access Link
Massouleh, SHM., Kordkheili, SAH., Navazi, HM. and Bahai, H. (2019) 'Combining Pole Placement and Online Empirical Mode Decomposition Methods to Adaptive Active Control of Structural Vibration'. Journal of Vibration and Acoustics, 141 (4). pp. 1 - 10. ISSN: 1048-9002
Wang, J., Yang, H., Ruan, J., Wang, Y. and Ji, S. (2019) 'Microstructure and properties of CoCrNi medium-entropy alloy produced by gas atomization and spark plasma sintering'. Journal of Materials Research, 34 (12). pp. 2126 - 2136. ISSN: 0884-2914 Open Access Link
Amini, A. and Banitsas, K. (2019) 'An Improved Technique for Increasing the Accuracy of Joint-to-Ground Distance Tracking in Kinect v2 for Foot-Off and Foot Contact Detection'. Journal of Medical Engineering and Technology, 43 (1). pp. 8 - 18. ISSN: 0309-1902 Open Access Link
Yu, L., den Engelsen, D., Gorobez, J., Fern, GR., Ireland, TG., Frampton, C. and et al. (2019) 'Crystal structure, photoluminescence and cathodoluminescence of Sr1-xCaxAl2O4 doped with Eu2+'. Optical Materials Express, 9 (5). pp. 2175 - 2195. ISSN: 2159-3930 Open Access Link
Hu, X., Siew, WH., Judd, MD., Reid, AJ. and Sheng, B. (2019) 'Modeling of High-Frequency Current Transformer Based Partial Discharge Detection in High-Voltage Cables'. IEEE Transactions on Power Delivery, 34 (4). pp. 1549 - 1556. ISSN: 0885-8977 Open Access Link
Li, YQ., Cheng, WM., Wang, B. and Ren, YZ. (2019) 'Numerical and analytical investigation on elastic compound buckling of latticed columns considering eccentricity and geometric imperfections'. Advances in Mechanical Engineering. ISSN: 1687-8132 Open Access Link
Jansen, G., Dehouche, Z., Bonser, R. and Corrigan, H. (2019) 'Validation of autonomous renewable energy hybrid wind/photovoltaic/RHFC prototype for the cell tower industry using MATLAB/Simulink'.2nd International Conference on Advanced Energy Materials (AEM) / 2nd International Conference on Solar Energy Materials (SEM) / 4th International Conference on Hydrogen Energy. Guildford, ENGLAND. 4 - 13 September. Elsevier BV. pp. 408 - 418. ISSN: 2214-7853 Open Access Link
Azhar, FE. and Pei, E. (2019) 'Investigating the Communication of 4D Printing among Product Designers and Manufacturing Engineers'.16th Rapid Design, Prototyping and Manufacturing Conference (RDPM2019). Brunel University London, UK. 4 - 5 April.Open Access Link
Lais, H., Lowe, PS., Gan, TH. and Wrobel, LC. (2019) 'Numerical investigation of design parameters for optimization of the in-situ ultrasonic fouling removal technique for pipelines'. Ultrasonics Sonochemistry, 56. pp. 94 - 104. ISSN: 1350-4177 Open Access Link
Shao, Y. and Cheng, K. (2019) 'Integrated modelling and analysis of micro-cutting mechanics with the precision surface generation in abrasive flow machining'. International Journal of Advanced Manufacturing Technology, 105 (11). pp. 4571 - 4583. ISSN: 0268-3768 Open Access Link
Yin, L. and Pei, E. (2019) 'A Toolkit: Fostering a Participatory Study of Sustainable Pavement Development'.LENS Conference: Designing Sustainability for All. Bangalore, India. 3 - 5 April. Proceedings of the Third LENS Conference: Designing Sustainability for All. pp. 1200 - 1205.Open Access Link
Wang, K., Liu, Y. and Wang, B. (2019) 'Follow-up optimized phononic band structure design based on reserved inclusions'. Physica B: Condensed Matter, 564. pp. 157 - 165. ISSN: 0921-4526 Open Access Link
Zhang, B., Huang, Z., Rahi, BH., Wang, Q. and Li, M. (2019) 'Online semi-supervised multi-person tracking with gaussian process regression'.2018 International Joint Conference on Metallurgical and Materials Engineering (JCMME 2018). Wellington, New Zealand. 2 - 12 December. EDP Sciences. pp. 1 - 8. ISSN: 2274-7214 Open Access Link
Omairey, SL., Dunning, PD. and Sriramula, S. (2019) 'Development of an ABAQUS plugin tool for periodic RVE homogenisation'. Engineering with Computers, 35 (2). pp. 567 - 577. ISSN: 0177-0667
Zhao, L., Cheng, K., Ding, H. and Zhao, L. (2019) 'On-Machine Measurement of the Straightness and Tilt Errors of a Linear Slideway Using a New Four-Sensor Method'. Chinese Journal of Mechanical Engineering (English Edition), 32 (1). pp. 1 - 11. ISSN: 1000-9345 Open Access Link
Vignjevic, R., Djordjevic, N., Wasilczuk, A., De Vuyst, T. and Meo, M. (2019) 'On high velocity impact on carbon fibre reinforced polymers'.SPIE Smart Structures + Nondestructive Evaluation. Denver, Colorado, United States. 29 - 7 March. SPIE. pp. 45 - 45. ISSN: 0277-786X Open Access Link
Nam, S. and Pei, E. (2019) 'A taxonomy of shape-changing behavior for 4D printed parts using shape-memory polymers'. Progress in Additive Manufacturing, 4 (2). pp. 167 - 184. ISSN: 2363-9512 Open Access Link
Chang, I., Cary, J., Gorges, R., Laing, I. and Latham, D. (Accepted) 'Sliding Component and Method'.
Shaw, S. (2019) 'An a priori error estimate for a temporally discontinuous Galerkin space-time finite element method for linear elasto- and visco-dynamics'. Computer Methods in Applied Mechanics and Engineering, 351. pp. 1 - 19. ISSN: 0045-7825 Open Access Link
Kudryashova, O., Khmeleva, M., Danilov, P., Dammer, V., Vorozhtsov, A. and Eskin, D. (2019) 'Optimizing the Conditions of Metal Solidification with Vibration'. Metals, 2019 (9). pp. 1 - 13. ISSN: 2075-4701 Open Access Link
Al-Isawi, AT., Collins, PEF. and Cashell, KA. (2019) 'Fully Non-Linear Numerical Simulation of a Shaking Table Test of Dynamic Soil-Pile-Structure Interactions in Soft Clay Using ABAQUS'.Eighth International Conference on Case Histories in Geotechnical Engineering. Philadelphia, Pennsylvania. 21 - 27 March. American Society of Civil Engineers. pp. 252 - 265. ISSN: 0895-0563 Open Access Link
Liu, G., Khorsand, S. and Ji, S. (2019) 'Electrochemical corrosion behaviour of Sn-Zn-xBi alloys used for miniature detonating cords'. Journal of Materials Science and Technology, 35 (8). pp. 1618 - 1628. ISSN: 1005-0302 Open Access Link
Jiang, P. and Atherton, M. (2019) 'Additive Manufacture of passive acoustic filters: a feasibility study'.Rapid Design Prototyping and Manufacturing 16th Conference. Brunel University London.Open Access Link
Pei, E. (2019) 'Editorial'. Progress in Additive Manufacturing, 4 (1). pp. 1 - 2. ISSN: 2363-9512
Dinsdale, A., Fang, C., Que, Z. and Fan, Z. (2019) 'Understanding the Thermodynamics and Crystal Structure of Complex Fe Containing Intermetallic Phases Formed on Solidification of Aluminium Alloys'. JOM, 71 (5). pp. 1731 - 1736. ISSN: 1047-4838 Open Access Link
Almurshedi, A., Atherton, M., Mares, C. and Stolarski, T. (2019) 'Modelling influence of Poisson's contraction on squeeze film levitation of planar objects'. Journal of Applied Physics, 125 (9). pp. 1 - 12. ISSN: 0021-8979 Open Access Link
Nam, S. and Pei, E. (2019) 'Mechanical analysis of Shape changing behavior of 4D Printed Parts'.16th Rapid Design, Prototyping and Manufacturing Conference (RDPM2019). Brunel University London, UK.Open Access Link
Loh, GH. and Pei, E. (2019) 'Design for Material Extrusion on Mesh Fabrics'.16th Rapid Design, Prototyping and Manufacturing Conference (RDPM2019). Brunel University London, UK.Open Access Link
Loh, GH. and Pei, E. (2019) 'Building a conceptual understanding of Functionally Graded Additive Manufacturing'.15th Rapid Design, Prototyping and Manufacturing Conference (RDPM2017). Northumbria University, Newcastle.Open Access Link