IMM
Faragasso, A., Bimbo, J., Noh, Y., Jiang, A., Sareh, S., Liu, H., et al. (2014) 'Novel uniaxial force sensor based on visual information for minimally invasive surgery'.2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, PEOPLES R CHINA. 22 - 7 June. IEEE. pp. 1405 - 1410. ISSN: 1050-4729
Sareh, S., Jiang, A., Faragasso, A., Noh, Y., Nanayakkara, T., Dasgupta, P., et al. (2014) 'Bio-inspired tactile sensor sleeve for surgical soft manipulators'.2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, PEOPLES R CHINA. 22 - 7 June. IEEE. pp. 1454 - 1459. ISSN: 1050-4729
Noh, Y., Sareh, S., Back, J., Wurdemann, HA., Ranzani, T., Secco, EL., et al. (2014) 'A three-Axial body force sensor for flexible manipulators'.2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, PEOPLES R CHINA. 22 - 7 June. IEEE. pp. 6388 - 6393. ISSN: 1050-4729
Back, J., Bimbo, J., Noh, Y., Seneviratne, L., Althoefer, K. and Liu, H. (2014) 'Control a contact sensing finger for surface haptic exploration'.2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, PEOPLES R CHINA. 22 - 7 June. IEEE. pp. 2736 - 2741. ISSN: 1050-4729
Chang, I. and Peng, T. (2014) 'A Novel Method to Homogenously Disperse Carbon Nanotubes in Aluminum Powders'.Euro PM2014 Congress. Salzburg. 21 - 24 September. Conference Proceedings.
Wang, G., Dargusch, MC., Qian, M., Eskin, D. and StJohn, DH. (2014) 'The role of ultrasonic treatment in refining the as-cast grain structureduring the solidification of an Al–2Cu alloy'. Journal of Crystal Growth, 408 (1). pp. 119 - 124. ISSN: 0022-0248 Open Access Link
Macredie, R., Koulouri, T. and Lauria, S. (2014) 'Do (and say) as I say: Linguistic adaptation in human-computer dialogues'. Human-Computer Interaction, 31 (1). pp. 59 - 95. ISSN: 0737-0024 Open Access Link
Zhou, X. and Li, Z. (2014) 'Manufacturing Cement-based Materials and Building Products via Extrusion'.34th Annual Cement and Concrete Science Conference. Sheffield, United Kingdom. 14 - 17 September. Proceedings of the 34th Annual Cement and Concrete Science Conference. pp. 45 - 48.
Zhou, X., Oladiran, O. and Dong, W. (2014) 'A New Method for Assessment of Cracking Tendency of Cement-based Materials under Restrained Shrinkage'.34th Annual Cement and Concrete Science Conference. Sheffield, United Kingdom. 14 - 17 September. Proceedings of the 34th Annual Cement and Concrete Science Conference. pp. 473 - 476.
Zhou, X. and Safari, S. (2014) 'Early-age Engineering Properties and Electrical Resistivity of Geopolymer Mortars'.34th Annual Cement and Concrete Science Conference. Sheffield, United Kingdom. 14 - 17 September. Proceedings of the 34th Annual Cement and Concrete Science Conference. pp. 471 - 471.
Hughes, K., Vignjevic, R. and Corcoran, F. (2014) 'Using ANSYS LS-DYNA for Simulation led design of tablet protective covers'.1st CADFEM Ireland Users’ Meeting & ANSYS Regional Conference. Engineers Ireland, Dublin. 11 - 12 September. CADFEM Ireland Ltd.
Nyamu, J. and De Coster, R. (2014) 'Co-innovation: the future of telemedicine in developing countries'.British Academy of Management (BAM) Doctoral Symposium 2014. University of Ulster Business School, Belfast. 8Open Access Link
Nowak, M., Bolzoni, L. and Nadendla, HB. (2014) 'Grain refinement of Al-Si alloys by Nb-B inoculation. Part I: concept development and effect on binary alloys'. Materials and Design, 66 (PA). pp. 366 - 375. ISSN: 1873-4197 Open Access Link
Bolzoni, L., Nowak, K. and Nadendla, HB. (2014) 'Grain refinement of Al-Si alloys by Nb-B inoculation. Part II: application to commercial alloys'. Materials and Design, 66, Part A, (5 February 2015). pp. 376 - 383. ISSN: 1873-4197 Open Access Link
Zhou, X., Dong, W., Oladiran, O., Wu, Z. and Kastiukas, G. (2014) 'Numerical and Experimental Assessment of the Effects of Specimen Size on Shrinkage Cracking of Concrete'.Twelfth International Conference on Computational Structures Technology. Naples, Italy. 2 - 5 September. Civil-Comp Press. pp. 1 - 20. ISSN: 1759-3433
Mohimi, A., Gan, TH. and Balachandran, W. (2014) 'Development of high temperature ultrasonic guided wave transducer for continuous in service monitoring of steam lines using non-stoichiometric lithium niobate piezoelectric ceramic'. Elsevier BV. pp. 432 - 442. ISSN: 0924-4247
Ceschin, F., Resta, B., Vezzoli, C. and Gaiardelli, P. (2014) 'Visualising product-service system business models'.19th DMI: Academic Design Management Conference. London. 1 - 4 September. Design Management Institute. pp. 2123 - 2152.Open Access Link
Tarhini, A., Hone, K. and Liu, X. (2014) 'Measuring the moderating effect of gender and age on E-learning acceptance in England: A structural equation modeling approach for an extended Technology Acceptance Model'. Journal of Educational Computing Research, 51 (2). pp. 163 - 184. ISSN: 0735-6331
Sayad Saravi, S., Cheng, K., Chong, TP. and Vathylakis, A. (2014) 'Design of serrate-semi-circular riblets with application to skin friction reduction on engineering surface'. International Journal of Flow Control, 6 (3). pp. 83 - 92. ISSN: 1756-8250 Open Access Link
Gulavani, O., Hughes, K. and Vignjevic, R. (2014) 'Explicit dynamic formulation to demonstrate compliance against quasi-static aircraft seat certification loads (CS25.561) -Part I: Influence of time and mass scaling'. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 228 (11). pp. 1982 - 1995. ISSN: 0954-4100
Rohan, E., Shaw, S. and Whiteman, JR. (2014) 'Erratum to Poro-viscoelasticity modelling based on upscaling quasistatic fluid-saturated solids [Computational Geosciences (2013), 10.1007/s10596-013-9363-1]'. Computational Geosciences, 18 (5). pp. 897 - 898. ISSN: 1420-0597
Srinivasan, A., Blawert, C., Huang, Y., Mendis, CL., Kainer, KU. and Hort, N. (2014) 'Corrosion behavior of Mg-Gd-Zn based alloys in aqueous NaCl solution'. Journal of Magnesium and Alloys, 2 (3). pp. 245 - 256. ISSN: 2213-9567
Mares, C. and Ursache, N. (2014) 'Aircraft Ground Structural Testing', in Blockley, R. and Shyy, W. (eds.) Encyclopedia of Aerospace Engineering. Wiley. pp. 1 - 16. ISBN 13: 9780470754405.
Que, ZP., Ma, T., Wang, J., Chen, J., Wang, CH. and Cheng, WL. (2014) 'Microstructure and mechanical properties of as-cast Mg-8Sn-1Al-1Zn-xNi alloys'. Journal of Central South University, 21 (9). pp. 3426 - 3433. ISSN: 2095-2899
Li, Z., Atherton, M. and Harrison, D. (2014) 'Identifying patent conflicts: TRIZ-Led Patent Mapping'. World Patent Information, 39 (Dec 2014). pp. 11 - 23. ISSN: 0172-2190 Open Access Link
Fateri, S., Boulgouris, NV., Wilkinson, A., Balachandran, W. and Gan, T-H. (2014) 'Frequency-sweep examination for wave mode identification in multimodal ultrasonic guided wave signal'. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 61 (9). pp. 1515 - 1524. ISSN: 0885-3010 Open Access Link
Wiese, B., Mendis, CL., Tolnai, D., Stark, A., Schell, N., Reichel, HP., et al. (2014) 'CaO dissolution during melting and solidification of a Mg-10 wt.% CaO alloy detected with in situ synchrotron radiation diffraction'. Journal of Alloys and Compounds, 618. pp. 64 - 66. ISSN: 0925-8388
Yang, H., Watson, D., Wang, Y. and Ji, S. (2014) 'Effect of nickel on the microstructure and mechanical property of die-cast Al–Mg–Si–Mn alloy'. Journal of Materials Science, 49 (24). pp. 8412 - 8422. ISSN: 0022-2461 Open Access Link
Mehrabani, M., Zhou, X. and Chen, H. (2014) 'Lifecycle performance assessment of steel fibre reinforced concrete ground slabs'.the 2014 International Conference on Advances in Structural Engineering and Mechanics (ICASEM2014). Busan, Korea. 24 - 28 August. Techno Press.
Tagang, IJ., Robert, CC., Pei, E. and Higgett, N. (2014) 'Determination of Comfort and Performance Properties of Upper Materials for Diabetic Footwear Construction'.Materials Science and Technology Society of Nigeria Conference, National Institute of Leather Science and Technology, NILEST. Zaria, Nigeria. 23Open Access Link
Areias, P., Cesar de Sa, JM. and Cardoso, RP. (2014) 'A simple assumed-strain quadrilateral shell element for finite strains and fracture'. Engineering with Computers, 31 (4). pp. 691 - 709. ISSN: 0177-0667
Su, SS., Chang, ITH., Kuo, WCH., Price, D., Pikramenou, Z. and Lead, J. (2014) 'Pulsed electrical discharge synthesis of red photoluminescence zinc oxide nanoparticles'. Journal of Nanoparticle Research, 16 (9). ISSN: 1388-0764
Men, H. and Fan, Z. (2014) 'An Analytical Model for Solute Segregation at Liquid Metal/Solid Substrate Interface'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (12). pp. 5508 - 5516. ISSN: 1073-5623
Eskin, GI. and Eskin, DG. (2014) 'Ultrasonic Treatment of Light Alloy Melts'. Boca Raton, FL: CRS Press. ISSN 13: 978-1-4665-7798-5
Pei, E. (2014) 'Reflecting on Design Sketching: Implications for Problem-Framing and Solution-focused Conceptual Ideation'. Archives of Design Research, 28 (1). ISSN: 1226-8046 Open Access Link
Wang, C., Cheng, K., Nelson, N., Sawangsri, W. and Rakowski, R. (2014) 'Cutting force-based analysis and correlative observations on the tool wear in diamond turning of singlecrystal silicon'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (10). pp. 1867 - 1873. ISSN: 0954-4054
Eskin, GI. and Eskin, DG. (2014) 'Ultrasonic Treatment of Light Alloy Melts'. London: Routledge. ISSN 13: 9781466577985
Shamass, R., Zhou, X. and Alfano, G. (2014) 'Finite-element analysis of shear-off failure of keyed dry joints in precast concrete segmental bridges'. Journal of Bridge Engineering, 20 (6). ISSN: 1943-5592 Open Access Link
Yang, W., Ji, S., Zhou, X., Stone, I., Scamans, G., Thompson, GE. and et al. (2014) 'Heterogeneous nucleation of α-Al grain on primary α-AlFeMnSi intermetallic investigated using 3d sem ultramicrotomy and HRTEM'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (9). pp. 3971 - 3980. ISSN: 1073-5623 Open Access Link
Rafael, S., Romero, A., Soua, S., Gan, TH., Neasham, J. and Goodfellow, G. (2014) 'Detection of gearbox failures by combined acoustic emission and vibration sensing in rotating machinery'. Insight Non Destructive Testing and Condition Monitoring, 56 (8). pp. 422 - 425. ISSN: 1354-2575
Artigao, E., Ferrando, JL., Gan, TH., Wang, B., Kappatos, V., Selcuk, C. and et al. (2014) 'Development of a baseline as a novel strategy for a condition monitoring system for the assessment of wind turbine generators'. Insight Non Destructive Testing and Condition Monitoring, 56 (8). pp. 417 - 421. ISSN: 1354-2575
Hughes, K., Gulavani, O., Vuyst, TD. and Vignjevic, R. (2014) 'Explicit dynamic formulation to demonstrate compliance against quasi-static aircraft seat certification loads (CS25.561) - Part II: Influence of body blocks'. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 228 (10). pp. 1890 - 1903. ISSN: 0954-4100
Cantor, EJ., Khera, B., Reeves, J., Birch, M., Shaw, S., banks, HT., et al. (2014) 'Acoustic localisation of coronary artery stenosis'.82nd Congress of the European-Atherosclerosis-Society (EAS). Spanish Soc Atherosclerosis, Madrid, SPAIN. Elsevier BV. pp. e272 - e272. ISSN: 0021-9150
Rafiq, MY. and Rustell, M. (2014) 'Building information modeling steered by evolutionary computing'. Journal of Computing in Civil Engineering, 28 (4). ISSN: 0887-3801
Yang, Q., Tang, Q., Wang, X. and Liu, C. (2014) 'Line of sight stabilization control based on Fuzzy PID controller and Kalman filter'. WIT Transactions on Engineering Sciences, 95. pp. 33 - 41. ISSN: 1743-3533
Zhou, X., Oladiran, OG. and Dong, W. (2014) 'On utilization of elliptical rings in assessing cracking tendency of concrete'.4th International Conference on the Durability of Concrete Structures. Purdue University, West Lafayette, Indiana, USA. 24 - 26 July. Purdue University Press. pp. 327 - 334.Open Access Link
Borsci, S., Macredie, RD., Martin, JL. and Young, T. (2014) 'How many testers are needed to assure the usability of medical devices?'. Expert Review of Medical Devices, 5 (5). pp. 513 - 525. ISSN: 1745-2422 Open Access Link
Gallear, D., Ghobadian, A. and He, Q. (2014) 'The mediating effect of environmental and ethical behaviour on supply chain partnership decisions and management appreciation of supplier partnership risks'. International Journal of Production Research, 53 (21). pp. 6455 - 6472. ISSN: 0020-7543 Open Access Link
Lalpoor, M., Miroux, A., Mendis, CL., Hort, N. and Offerman, SE. (2014) 'The interaction of precipitation and deformation in a binary Mg-Ca alloy at elevated temperatures'. Materials Science and Engineering A, 609. pp. 116 - 124. ISSN: 0921-5093
Algassem, F., Yang, Q. and Au, J. (2014) 'Application of lean six sigma principles to food distribution SMEs'. American Academic & Scholarly Research Journal, 6 (4). pp. 251 - 258.
del Pozo, S., Ribton, C. and Smith, DR. (2014) 'Characterisation of an RF Excited Argon Plasma Cathode Electron Beam Gun'.Tenth International Vacuum Electron Sources Conference. Russia, Saint-Petersburg. 4 - 4 July. IEEE. pp. 225 - 226.Open Access Link